523 Engine parts are listed for the 2019 Chevrolet Blazer, in 96 part types, covering both the 2.5L L4 and the 3.6L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2019 Chevrolet Blazer, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 91 parts of the 523 listed are Oil (40 parts), Oil Filter (26 parts) and Variable Valve Timing (VVT) Solenoid / Actuator (25 parts). The other 93 part types cover the remaining 432 parts.
The 2019 Chevrolet Blazer was sold with both the 2.5L L4 and the 3.6L V6. 49 parts fit every engine; the other 474 are engine-specific. Each part shows which engine(s) it fits.
58 brands supply engine parts for the 2019 Chevrolet Blazer, led by GM GENUINE (170 parts), CLOYES (33 parts) and MELLING (30 parts), plus 55 more brands. Quality grades include Standard Replacement, Economy and Chain Only.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2019 Chevrolet Blazer. 67 parts have it, including CLOYES C919 (Balance Shaft Chain) and MELLING BG5150 (Balance Shaft Chain Guide). Each part number opens a page with every vehicle that part fits.
Balance Shaft Chain
Chain Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.5L L4 | C919 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 2.5L L4 | 1094 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 2.5L L4 | 12626983 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | C766C | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | 90919S | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| MELLING Fits: 2.5L L4 | 31094S | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
This table covers the chains that drive the balance shafts.
6 Balance Shaft Chain parts are listed for the 2019 Chevrolet Blazer, from CLOYES, MELLING, GM GENUINE and 1 other brand. CLOYES C919 carries the "Popular" badge.
The Chain Only section lists 4 options from CLOYES, MELLING, GM GENUINE and 1 other brand — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. CLOYES C919 is listed in this group.
In the Kit grade, CLOYES and MELLING supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is CLOYES 90919S.
Listed part numbers: CLOYES C919, MELLING 1094 and GM GENUINE 12626983, plus the other parts above.
Balance Shaft Chain Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.5L L4 | BG5150 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.5L L4 | 95953 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 2.5L L4 | 95953 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 2.5L L4 | 12655471 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76248 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the guides that keep the balance-shaft chain on its path.
5 Balance Shaft Chain Guide parts are listed for the 2019 Chevrolet Blazer, from MELLING, CLOYES, FVP and 2 other brands. MELLING BG5150 carries the "Popular" badge.
Part numbers include MELLING BG5150 and CLOYES 95953, among others listed above.
Balance Shaft Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 12626984 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.5L L4 | 95952 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 2.5L L4 | 95952 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.5L L4 | BT5208 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | T66206 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
5 Balance Shaft Chain Tensioner parts for the 2019 Chevrolet Blazer come from 5 brands — GM GENUINE, CLOYES, FVP and 2 other brands. The "Popular" part is GM GENUINE 12626984.
This group includes GM GENUINE 12626984 and CLOYES 95952 and the remaining parts above.
Balance Shaft Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.5L L4 | S1370 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.5L L4 | S1101 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 2.5L L4 | S1101 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 2.5L L4 | 12655716 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | G56384 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft sprockets.
5 Balance Shaft Sprocket parts are listed for the 2019 Chevrolet Blazer, from MELLING, CLOYES, FVP and 2 other brands. MELLING S1370 carries the "Popular" badge.
Part numbers include MELLING S1370 and CLOYES S1101, among others listed above.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12638651 | 🇺🇸 US 🇨🇦 CA | Computer Controlled Compatible: YES | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 28290131 | 🇺🇸 US 🇨🇦 CA | Computer Controlled Compatible: YES | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12677826 | 🇺🇸 US 🇨🇦 CA | Computer Controlled Compatible: YES | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12677832 | 🇺🇸 US 🇨🇦 CA | Exhaust (Right)Base Model or Premier or RS Model | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12677833 | 🇺🇸 US 🇨🇦 CA | Exhaust (Left)Base Model or Premier or RS Model | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12684808 | 🇺🇸 US 🇨🇦 CA | Intake (Right)Trans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12684809 | 🇺🇸 US 🇨🇦 CA | Intake (Left)Base Model or Premier or RS Model | View on Amazon |
This table covers the camshafts that open the valves.
GM GENUINE supplies the 7 Camshaft parts for the 2019 Chevrolet Blazer.
Part numbers include GM GENUINE 12638651, GM GENUINE 28290131 and GM GENUINE 12677826, among others listed above.
Camshaft Alignment Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LISLE Fits: 3.6L V6 | 37530 | 🇺🇸 US 🇨🇦 CA | GM | View on Amazon |
This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes.
This group shows a single part: LISLE 37530.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12574477 | 🇺🇸 US 🇨🇦 CA | Camshaft Sprocket Seal | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12636316 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts for the 2019 Chevrolet Blazer come from GM GENUINE.
This group includes GM GENUINE 12574477 and GM GENUINE 12636316.
Circular / Semi-Circular Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 11588547 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
This group shows a single part: GM GENUINE 11588547.
Connecting Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12674412 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 12647161 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the connecting rods between each piston and the crankshaft.
GM GENUINE supplies both parts for the 2019 Chevrolet Blazer.
This group includes GM GENUINE 12674412 and GM GENUINE 12647161.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12668645 | 🇺🇸 US 🇨🇦 CA | Contains Parts For 4 RodsSet | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12672032 | 🇺🇸 US 🇨🇦 CA | Outside Diameter (mm): 60.936 mm | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19368257 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.6L V6 | CB2033A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Coated | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Connecting Rod Bearing parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE and MAHLE / CLEVITE.
Part numbers include GM GENUINE 12668645, GM GENUINE 12672032 and GM GENUINE 19368257, among others listed above.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 11548927 | 🇺🇸 US 🇨🇦 CA | M9X1X48 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11519680 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Connecting Rod bolts.
2 Connecting Rod Bolt parts for the 2019 Chevrolet Blazer come from GM GENUINE.
Part numbers include GM GENUINE 11548927 and GM GENUINE 11519680.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 54229400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.6L V6 | 54323100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2019 Chevrolet Blazer.
Listed part numbers: AJUSA 54229400 and AJUSA 54323100.
Crankshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12699162 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the crankshafts that turn piston motion into rotation.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 12699162.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12668646 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12744917 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19368254 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Crankshaft Main Bearing parts for the 2019 Chevrolet Blazer come from GM GENUINE.
This group includes GM GENUINE 12668646, GM GENUINE 12744917 and GM GENUINE 19368254.
Crankshaft Main Bearing Cap Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2019 Blazer engines | 11588713 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| ELRING Fits: 3.6L V6 | B75610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11589001 | 🇺🇸 US 🇨🇦 CA | Base ModelM8X1.25X25 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11589000 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11609410 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Crankshaft Main Bearing Cap bolts.
5 Crankshaft Main Bearing Cap Bolt parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE and ELRING. GM GENUINE 11588713 carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.
This group includes GM GENUINE 11588713, ELRING B75610 and GM GENUINE 11589001 and the remaining parts above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2019 Blazer engines | NS99166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| BCA Fits: 2.5L L4 | NS99353 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Fits: 2.5L L4 | 99353 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Fits: 3.6L V6 | 99166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.5L L4 | WS99353 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS99166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
6 Crankshaft Repair Sleeve parts for the 2019 Chevrolet Blazer come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 5 are engine-specific.
Part numbers include BCA NS99166, BCA NS99353 and NATIONAL 99353, among others listed above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L L4 | BS40739 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 12626923 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 12591866 | 🇺🇸 US 🇨🇦 CA | Seal Type: Oil Seal | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12654010 | 🇺🇸 US 🇨🇦 CA | FrontBase Model or Premier or RS Model | View on Amazon |
| NATIONAL Popular Fits: 3.6L V6 | 710674 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| ACDELCO Fits: 2.5L L4 | 710237 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| AJUSA Fits: 2.5L L4 | 15108700 | 🇺🇸 US 🇨🇦 CA | FrontClockwise | View on Amazon |
| APEX Fits: 2.5L L4 | ABS333 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| BCA Fits: 2.5L L4 | NS710237 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| ELRING Fits: 3.6L V6 | 048390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (Fluoride Rubber)Radial Shaft Seal Design: A/BS | View on Amazon |
| NATIONAL Fits: 2.5L L4 | 710237 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Fits: 3.6L V6 | 710855 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| SCHAEFFLER Fits: 2.5L L4 | SS3894 | 🇺🇸 US 🇨🇦 CA | Rear3.54" I:D X 4.1" O.D. X 0.43" Width | View on Amazon |
| VAICO Fits: 2.5L L4 | V401801 | 🇺🇸 US 🇨🇦 CA | RearGrade: OEM | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 813822900 | 🇺🇸 US 🇨🇦 CA | Seal Type: Double Lip | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.5L L4 | WS710237 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS710674 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS710855 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
18 Crankshaft Seal parts for the 2019 Chevrolet Blazer come from 12 brands — GM GENUINE, NATIONAL, WJB / INMOTION PARTS and 9 other brands. The "Popular" part is FEL-PRO BS40739.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2019 Blazer engines | 12570326 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 12570326.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 81065100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.6L V6 | 81082800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | ES73486 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 11610687 | 🇺🇸 US 🇨🇦 CA | M11X2X165 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11547020 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11547584 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
6 Cylinder Head Bolt parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, AJUSA and FEL-PRO.
Listed part numbers: AJUSA 81065100, AJUSA 81082800 and FEL-PRO ES73486, plus the other parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12647574 | 🇺🇸 US 🇨🇦 CA | LeftBase Model or Premier or RS Model | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12647575 | 🇺🇸 US 🇨🇦 CA | RightBase Model or Premier or RS Model | View on Amazon |
| AJUSA Fits: 2.5L L4 | 10262300 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.6L V6 | 10264200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.6L V6 | 10264300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| APEX Fits: 3.6L V6 | AHG1366L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| APEX Fits: 3.6L V6 | AHG1366R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| FEL-PRO Fits: 2.5L L4 | 26784PT | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | 26793PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | 26794PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12648979 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.5L L4 | 55071 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 55390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 55391 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Cylinder Head Gasket parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, AJUSA, FEL-PRO and 2 other brands. GM GENUINE 12647574 carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 52606000 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.6L V6 | 52639700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| ELRING Fits: 3.6L V6 | 048980 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | without valve stem seals | View on Amazon |
| ELRING Fits: 3.6L V6 | 049010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12659927 | 🇺🇸 US 🇨🇦 CA | Includes HD Gasket, Head Bolts, INT and EXH Gaskets | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12672033 | 🇺🇸 US 🇨🇦 CA | Contains Head Gaskets and Bolts, Camshaft Cover and Intake Manifold Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | HS55071 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | HS55390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
8 Cylinder Head Gasket Set parts are listed for the 2019 Chevrolet Blazer, from AJUSA, ELRING, GM GENUINE and 1 other brand.
This group includes AJUSA 52606000, AJUSA 52639700 and ELRING 048980 and the remaining parts above.
Engine Block Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 11602951 | 🇺🇸 US 🇨🇦 CA | M28X1.25X18M28X1.25-4-Steel | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11546667 | 🇺🇸 US 🇨🇦 CA | Thread Diameter (In): 0.63 In | View on Amazon |
This table covers the Engine Block drain plugs.
GM GENUINE supplies both parts for the 2019 Chevrolet Blazer.
This group includes GM GENUINE 11602951 and GM GENUINE 11546667.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12586687 | 🇺🇸 US 🇨🇦 CA | Engine Block Heater (K05) | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12587380 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelUse with 2 Pin Heater | View on Amazon |
| KAT'S HEATERS Fits: 2.5L L4 | 28510 | 🇺🇸 US 🇨🇦 CA | Engine Heater Replacement Cord | View on Amazon |
| KAT'S HEATERS Fits: 3.6L V6 | 28811 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Replacement Cord | View on Amazon |
| KAT'S HEATERS Fits: 3.6L V6 | 11811 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Cartridge | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
5 Engine Block Heater parts for the 2019 Chevrolet Blazer come from 2 brands — KAT'S HEATERS and GM GENUINE.
Part numbers include GM GENUINE 12586687, GM GENUINE 12587380 and KAT'S HEATERS 28510, among others listed above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 50548800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.6L V6 | 50568500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2019 Chevrolet Blazer.
This group includes AJUSA 50548800 and AJUSA 50568500.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12627156 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647868 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| MELLING Fits: 2.5L L4 | V3442 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | V3468 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.5L L4 | 1013442 | 🇺🇸 US 🇨🇦 CA | 1.142 Head Dia. 0.2345 Stem 4.073 OAL | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 1013468 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.240 Head Diameter. | View on Amazon |
| SBI Fits: 2.5L L4 | 13442 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 3.6L V6 | 13468 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
8 Exhaust Valve parts for the 2019 Chevrolet Blazer come from 4 brands — GM GENUINE, MELLING, QUALCAST and 1 other brand.
Part numbers include GM GENUINE 12627156, GM GENUINE 12647868 and MELLING V3442, among others listed above.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2019 Blazer engines | 12718357 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| WELLS Fits: all 2019 Blazer engines | 5T5013 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
2 Fuel Pump Camshaft Follower parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE and WELLS. All of them fit every engine offered in the 2019 Blazer.
Listed part numbers: GM GENUINE 12718357 and WELLS 5T5013.
Harmonic Balancer
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 2.5L L4 | SK594713 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 25202078 | 🇺🇸 US 🇨🇦 CA | Center Bolt Thread Diameter (In): 0.63 In | View on Amazon |
| ATP Fits: 2.5L L4 | 102479 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 2.5L L4 | 594713 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 2.5L L4 | 594713 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12700427 | 🇺🇸 US 🇨🇦 CA | Center Bolt Thread Diameter (In): 0.63 In | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
6 Harmonic Balancer parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, SKP, ATP and 2 other brands. GM GENUINE 25202078 carries the "Popular" badge.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594713.
The Standard Replacement section lists 4 options from GM GENUINE, ATP, DORMAN and 1 other brand — built to original-equipment specification. GM GENUINE 25202078 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes GM GENUINE 25202078, SKP SK594713 and ATP 102479 and the remaining parts above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12557840 | 🇺🇸 US 🇨🇦 CA | M16X2.0X103 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11546516 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts for the 2019 Chevrolet Blazer come from GM GENUINE.
This group includes GM GENUINE 12557840 and GM GENUINE 11546516.
Intake Insulator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12711487 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Intake insulators.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 12711487.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12646130 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12674037 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| VAICO Fits: 2.5L L4 | V510602 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
3 Intake Manifold parts for the 2019 Chevrolet Blazer come from 2 brands — GM GENUINE and VAICO.
This group includes GM GENUINE 12646130, GM GENUINE 12674037 and VAICO V510602.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 11588352 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11547321 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11547030 | 🇺🇸 US 🇨🇦 CA | UpperBase Model or Premier or RS Model | View on Amazon |
This table covers the Intake Manifold bolts.
GM GENUINE supplies the 3 Intake Manifold Bolt parts for the 2019 Chevrolet Blazer.
Listed part numbers: GM GENUINE 11588352, GM GENUINE 11547321 and GM GENUINE 11547030.
Intake Manifold Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12680066 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Intake Manifold covers.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 12680066.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12648665 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| AJUSA Fits: 2.5L L4 | 13268400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.6L V6 | AMS13660 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ELRING Fits: 3.6L V6 | 048550 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| FEL-PRO Fits: 2.5L L4 | MS97603 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | MS97649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetThrottle Body Gasket Not Included | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12655276 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | MS20112 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | MS20442 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Intake Manifold Gasket parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, FEL-PRO, MAHLE / CLEVITE and 3 other brands. GM GENUINE 12648665 carries the "Popular" badge.
This group includes GM GENUINE 12648665, AJUSA 13268400 and APEX AMS13660 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12662527 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647867 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| MELLING Fits: 2.5L L4 | V3441 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | V3467 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.5L L4 | 1013441 | 🇺🇸 US 🇨🇦 CA | 1.437 Head Dia. 0.2348 Stem 3.776 OAL | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 1013467 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.551 Head Diameter. | View on Amazon |
| SBI Fits: 3.6L V6 | 13467 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
7 Intake Valve parts for the 2019 Chevrolet Blazer come from 4 brands — GM GENUINE, MELLING, QUALCAST and 1 other brand.
Part numbers include GM GENUINE 12662527, GM GENUINE 12647867 and MELLING V3441, among others listed above.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 84624770 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Popular Fits: 3.6L V6 | 84499831 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| ANCHOR Fits: 2.5L L4 | 3526 | 🇺🇸 US 🇨🇦 CA | RightHydraulic | View on Amazon |
| ANCHOR Fits: 3.6L V6 | 3518 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.5L L4 | A20076 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.6L V6 | A20073 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| PIONEER Fits: 2.5L L4 | 613526 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| PIONEER Fits: 3.6L V6 | 613518 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| WESTAR Fits: 2.5L L4 | EM4438 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| WESTAR Fits: 3.6L V6 | EM4374 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightFWD | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
10 Motor Mount parts for the 2019 Chevrolet Blazer come from 5 brands — GM GENUINE, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is GM GENUINE 84624770.
Motor Mount Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2019 Blazer engines | 11547918 | 🇺🇸 US 🇨🇦 CA | M12 X 1.75 X 61 | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11588741 | 🇺🇸 US 🇨🇦 CA | M10X1.5X45 | View on Amazon |
This table covers the Motor Mount bolts.
GM GENUINE supplies both parts for the 2019 Chevrolet Blazer. All of them fit every engine offered in the 2019 Blazer.
Listed part numbers: GM GENUINE 11547918 and GM GENUINE 11588741.
Motor Mount Bracket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11589279 | 🇺🇸 US 🇨🇦 CA | SINGLE USEM12X1.75X85.9 | View on Amazon |
This table covers the Motor Mount Bracket bolts.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 11589279.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.5L L4 | 300513 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ANCHOR Fits: 3.6L V6 | 300504 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWD | View on Amazon |
| ANCHOR Fits: 3.6L V6 | 300505 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the Motor Mount kits.
3 Motor Mount Kit parts for the 2019 Chevrolet Blazer come from ANCHOR.
Part numbers include ANCHOR 300513, ANCHOR 300504 and ANCHOR 300505.
Oil
Summary: Notes list SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, MOBIL and VALVOLINE.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.5L L4 | 109302 | 🇺🇸 US | dexos 1 Gen 2 New Formulation or 0W-20(DEXOS1 GEN 3) X 6Full Synthetic | View on Amazon |
| ACDELCO Popular Fits: 3.6L V6 | 109324 | 🇺🇸 US | 5W-30(DEXOS1 GEN 3)(Full Synthetic) X 61 Quart | View on Amazon |
| LIQUI MOLY Popular Fits: 2.5L L4 | 20438 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 2.5L L4 | 22046 | 🇺🇸 US 🇨🇦 CA | Top Tec 6600 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 3.6L V6 | 20228 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: 2.5L L4 | 124184 | 🇺🇸 US 🇨🇦 CA | 0W-20Mobil 1 Advanced Fuel Economy | View on Amazon |
| MOBIL Popular Fits: 3.6L V6 | 125195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 3.6L V6 | 124315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30Mobil 1 Advanced | View on Amazon |
| LIQUI MOLY Fits: 2.5L L4 | 2207 | 🇺🇸 US 🇨🇦 CA | Special TEC AA 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.5L L4 | 20436 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.5L L4 | 22044 | 🇺🇸 US 🇨🇦 CA | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.5L L4 | 2208 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.5L L4 | 22048 | 🇺🇸 US 🇨🇦 CA | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.6L V6 | 20136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.6L V6 | 20226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.6L V6 | 20138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-305 Liter | View on Amazon |
| LUCAS OIL Fits: 2.5L L4 | 10564 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 0W-201 qt | View on Amazon |
| LUCAS OIL Fits: 2.5L L4 | 18003 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 0W-206 Gallon | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 10049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 18005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 18008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 0W-306 Gallon | View on Amazon |
| MOBIL Fits: 2.5L L4 | 120926 | 🇺🇸 US 🇨🇦 CA | Extended Performance 0W-20Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 2.5L L4 | 124592 | 🇺🇸 US 🇨🇦 CA | Truck & SUV 0W-20Mobil 1 Truck & SUV | View on Amazon |
| MOBIL Fits: 3.6L V6 | 112627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 3.6L V6 | 124595 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Truck & SUV 5W-30Mobil 1 Truck & SUV | View on Amazon |
| PENTOSIN Fits: 2.5L L4 | 8044210 | 🇺🇸 US 🇨🇦 CA | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 2.5L L4 | 8044212 | 🇺🇸 US 🇨🇦 CA | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| PENTOSIN Fits: 3.6L V6 | 8044214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 3.6L V6 | 8044216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | VV916 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | 891682 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | 881150 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | VV955 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 891678 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 891670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 881164 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 2.5L L4 | 122535 | 🇺🇸 US 🇨🇦 CA | High Mileage 0W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 2.5L L4 | 123836 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 0W-20Extended Performance High Mileage Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| MOBIL Fits: 3.6L V6 | 103767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.6L V6 | 123842 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
40 Oil parts for the 2019 Chevrolet Blazer come from 6 brands — LIQUI MOLY, MOBIL, VALVOLINE and 3 other brands. The "Popular" part is ACDELCO 109302. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 36 parts.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12662732 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
This group shows a single part: GM GENUINE 12662732.
Oil Cooler Adapter Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12733672 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelRound | View on Amazon |
This table covers the seals at the Oil Cooler Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: GM GENUINE 12733672.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 836300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (Fluoride Rubber) | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2019 Chevrolet Blazer — ELRING 836300.
Oil Cooler Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12662673 | 🇺🇸 US 🇨🇦 CA | InletBase Model or Premier or RS Model | View on Amazon |
This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
This group shows a single part: GM GENUINE 12662673.
Oil Cooler Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12733672 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 12733672.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L L4 | 918828 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12654077 | 🇺🇸 US 🇨🇦 CA | Dipstick OnlyLength (mm): 580 mm | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12666871 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12672635 | 🇺🇸 US 🇨🇦 CA | Tube Only | View on Amazon |
This table covers the Oil Dipstick tubes.
4 Oil Dipstick / Tube parts for the 2019 Chevrolet Blazer come from 2 brands — GM GENUINE and DORMAN.
This group includes DORMAN 918828, GM GENUINE 12654077 and GM GENUINE 12666871 and the remaining parts above.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 584210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Inner Diameter [MM]: 6,07 | View on Amazon |
| FEL-PRO Fits: all 2019 Blazer engines | 73889 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: all 2019 Blazer engines | 24504031 | 🇺🇸 US 🇨🇦 CA | L Model6.07 ID | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Oil Dipstick / Tube Seal parts are listed for the 2019 Chevrolet Blazer, from ELRING, FEL-PRO and GM GENUINE. 2 parts fit every engine; the other 1 is engine-specific.
Part numbers include ELRING 584210, FEL-PRO 73889 and GM GENUINE 24504031.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2019 Blazer engines | 090948CD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: all 2019 Blazer engines | 090948 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12-1.7515MM Hex Head T45 Torx | View on Amazon |
| ENGINETECH Fits: 2.5L L4 | DP8031 | 🇺🇸 US | View on Amazon | |
| GM GENUINE Fits: all 2019 Blazer engines | 55577568 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts for the 2019 Chevrolet Blazer come from 3 brands — DORMAN, ENGINETECH and GM GENUINE. 3 parts fit every engine; the other 1 is engine-specific.
Listed part numbers: DORMAN 090948CD, DORMAN 090948 and ENGINETECH DP8031, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: all 2019 Blazer engines | 70820 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| GM GENUINE Popular Fits: all 2019 Blazer engines | 12616850 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| AJUSA Fits: all 2019 Blazer engines | 01288800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: all 2019 Blazer engines | 097119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber Gasket | View on Amazon |
| DORMAN Fits: all 2019 Blazer engines | 97119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber GasketRubber | View on Amazon |
| FEL-PRO Fits: all 2019 Blazer engines | 71244 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| ULTRA-POWER Fits: all 2019 Blazer engines | 097119 | 🇺🇸 US 🇨🇦 CA | ID: 0.448"RUBBER GASKET | View on Amazon |
| VAICO Fits: all 2019 Blazer engines | V401110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: all 2019 Blazer engines | 711351300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.4150 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Oil Drain Plug Gasket parts are listed for the 2019 Chevrolet Blazer, from FEL-PRO, DORMAN, GM GENUINE and 4 other brands. FEL-PRO 70820 carries the "Popular" badge. All of them fit every engine offered in the 2019 Blazer.
This group includes FEL-PRO 70820, GM GENUINE 12616850 and AJUSA 01288800 and the remaining parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.5L L4 | 12713785 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| ACDELCO Fits: 3.6L V6 | FC279 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| CALORSTAT Fits: all 2019 Blazer engines | OC2314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PlasticTwist-On | View on Amazon |
| DORMAN Fits: all 2019 Blazer engines | 90202 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: all 2019 Blazer engines | MO190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
5 Oil Filler Cap parts for the 2019 Chevrolet Blazer come from 4 brands — ACDELCO, CALORSTAT, DORMAN and 1 other brand. 3 parts fit every engine; the other 2 are engine-specific.
Part numbers include ACDELCO 12713785, ACDELCO FC279 and CALORSTAT OC2314, among others listed above.
Oil Filler Cap Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 592250 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SealMaterial: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| ELRING Fits: 3.6L V6 | 823620 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SealMaterial: HNBR (hydrogenated nitrile butadiene rubber) | View on Amazon |
| FEL-PRO Fits: all 2019 Blazer engines | 73193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Services OEM bonded Cap sealAftermarket Design | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 24100002 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Filler Cap Gasket parts are listed for the 2019 Chevrolet Blazer, from ELRING, FEL-PRO and GM GENUINE. 2 parts fit every engine; the other 2 are engine-specific.
This group includes ELRING 592250, ELRING 823620 and FEL-PRO 73193 and the remaining parts above.
Oil Filler Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12686973 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS Model | View on Amazon |
This table covers the Oil Filler tubes.
This group shows a single part: GM GENUINE 12686973.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Fits: 2.5L L4 | PH10064 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: YESSpin On | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.6L V6 | PH1500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FRAM Fits: 2.5L L4 | FE12060 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FRAM Fits: 3.6L V6 | FE10575 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 2.5L L4 | R0290 | 🇺🇸 US 🇨🇦 CA | OE# 12640445 | View on Amazon |
| FVP Fits: 3.6L V6 | R0412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PRO-TEC Fits: 2.5L L4 | PXL10290 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRO-TEC Fits: 3.6L V6 | PXL10412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PUROLATOR Fits: 3.6L V6 | PL21495 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Media Material: Enhanced Cellulose | View on Amazon |
| VARIOUS MFR Fits: 2.5L L4 | UPG64R | 🇺🇸 US 🇨🇦 CA | Standard LifeFilter Media Material: Enhanced Cellulose | View on Amazon |
| VARIOUS MFR Fits: 3.6L V6 | UPG63R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 3.6L V6 | M1212A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX Popular Fits: 2.5L L4 | WL10290XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 2.5L L4 | M1114A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.5L L4 | PF64 | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentM22 Thread | View on Amazon |
| ACDELCO Popular Fits: 3.6L V6 | PF63A | 🇺🇸 US 🇨🇦 CA | SilverBlack Shell | View on Amazon |
| MOTORCRAFT Popular Fits: 3.6L V6 | FL500S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WIX Popular Fits: 2.5L L4 | WL10290 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ACDELCO Fits: 2.5L L4 | PF663 | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalSpin-On | View on Amazon |
| ACDELCO Fits: 2.5L L4 | PF64A | 🇺🇸 US 🇨🇦 CA | SilverBlack Shell | View on Amazon |
| FVP Fits: 2.5L L4 | R0290XL | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
| HASTINGS / BALDWIN Fits: 2.5L L4 | LF630 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HASTINGS / BALDWIN Fits: 3.6L V6 | B40144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.5L L4 | OC614 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | OC1421 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| WIX Fits: 3.6L V6 | WL10412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
26 Oil Filter parts for the 2019 Chevrolet Blazer come from 12 brands — ACDELCO, FVP, WIX and 9 other brands. The "Popular" part is MOBIL M1212A. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 12 parts.
Oil Galley Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 11588547 | 🇺🇸 US 🇨🇦 CA | Fits Engine BlockM12X1.75X16.5 | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 09427693 | 🇺🇸 US 🇨🇦 CA | Engine Block61 Outside Diameter, .25 Thick | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11562126 | 🇺🇸 US 🇨🇦 CA | Cylinder HeadBase Model or Premier or RS Model | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11546667 | 🇺🇸 US 🇨🇦 CA | Thread Diameter (In): 0.63 In | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12691176 | 🇺🇸 US 🇨🇦 CA | Engine BlockBase Model or Premier or RS Model | View on Amazon |
This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
5 Oil Galley Plug parts for the 2019 Chevrolet Blazer come from GM GENUINE. 1 part fits every engine; the other 4 are engine-specific.
This group includes GM GENUINE 11588547, GM GENUINE 09427693 and GM GENUINE 11562126 and the remaining parts above.
Oil Level Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FAMOUS BRAND Fits: 3.6L V6 | FFC1241 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 2.5L L4 | 12696434 | 🇺🇸 US 🇨🇦 CA | Wiring Harness Length (In): 10.04 In | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12696433 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | PS616 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 2.5L L4 | PS616 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| UNITED MOTOR PRODUCTS Fits: 2.5L L4 | OPS316 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 3.6L V6 | 5S17582 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
7 Oil Level Sensor parts for the 2019 Chevrolet Blazer come from 6 brands — GM GENUINE, FAMOUS BRAND, STANDARD MOTOR PRODUCTS and 3 other brands.
Listed part numbers: FAMOUS BRAND FFC1241, GM GENUINE 12696434 and GM GENUINE 12696433, plus the other parts above.
Oil Level Sensor Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 351330 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 12638820 | 🇺🇸 US 🇨🇦 CA | Material: Rubber | View on Amazon |
This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
2 Oil Level Sensor Gasket / O-Ring parts for the 2019 Chevrolet Blazer come from 2 brands — ELRING and GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: ELRING 351330 and GM GENUINE 12638820.
Oil Nozzle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12627113 | 🇺🇸 US 🇨🇦 CA | Injector Spray Nozzle | View on Amazon |
| MELLING Fits: 2.5L L4 | 5468N | 🇺🇸 US 🇨🇦 CA | Injector Spray Nozzle | View on Amazon |
This table covers the Oil nozzles.
2 Oil Nozzle parts for the 2019 Chevrolet Blazer come from 2 brands — GM GENUINE and MELLING.
Listed part numbers: GM GENUINE 12627113 and MELLING 5468N.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 12676340 | 🇺🇸 US 🇨🇦 CA | LowerFWD | View on Amazon |
| DORMAN Fits: 2.5L L4 | 264880 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| DORMAN Fits: 3.6L V6 | 264884 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 28289985 | 🇺🇸 US 🇨🇦 CA | Includes Upper Oil Pan Assembly | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647615 | 🇺🇸 US 🇨🇦 CA | LowerBase Model or Premier or RS Model | View on Amazon |
| SKP Fits: 2.5L L4 | SK264880 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| SKP Fits: 3.6L V6 | SK264884 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| SPECTRA PREMIUM Fits: 2.5L L4 | GMP130A | 🇺🇸 US 🇨🇦 CA | LowerGasket and/or Sealant Not Included | View on Amazon |
| SPECTRA PREMIUM Fits: 3.6L V6 | GMP133A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
9 Oil Pan parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, DORMAN, SKP and 1 other brand. GM GENUINE 12676340 carries the "Popular" badge.
Listed part numbers: GM GENUINE 12676340, DORMAN 264880 and DORMAN 264884, plus the other parts above.
Oil Pan Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2019 Blazer engines | 11588734 | 🇺🇸 US 🇨🇦 CA | Base ModelSINGLE USE | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11588725 | 🇺🇸 US 🇨🇦 CA | M8X1.25X35 | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11588732 | 🇺🇸 US 🇨🇦 CA | M8X1X70Hex Flange Head | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11588726 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11588694 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Oil Pan bolts.
5 Oil Pan Bolt parts for the 2019 Chevrolet Blazer come from GM GENUINE. The "Popular" part is GM GENUINE 11588734. 3 parts fit every engine; the other 2 are engine-specific.
Listed part numbers: GM GENUINE 11588734, GM GENUINE 11588725 and GM GENUINE 11588732, plus the other parts above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 048520 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647081 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| VICTOR REINZ Fits: all 2019 Blazer engines | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts for the 2019 Chevrolet Blazer come from 3 brands — ELRING, GM GENUINE and VICTOR REINZ. 1 part fits every engine; the other 2 are engine-specific.
This group includes ELRING 048520, GM GENUINE 12647081 and VICTOR REINZ 703141410.
Oil Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12674460 | 🇺🇸 US 🇨🇦 CA | Drive Type: Drive Shaft | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12741263 | 🇺🇸 US 🇨🇦 CA | Alternate Pressure Springs Included: YES | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
2 Oil Pump parts for the 2019 Chevrolet Blazer come from GM GENUINE.
Part numbers include GM GENUINE 12674460 and GM GENUINE 12741263.
Oil Pump Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.6L V6 | C952 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 3.6L V6 | C1135 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the chains that drive the oil pump.
2 Oil Pump Chain parts are listed for the 2019 Chevrolet Blazer, from CLOYES and S.A. GEAR.
Part numbers include CLOYES C952 and S.A. GEAR C1135.
Oil Pump Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.6L V6 | 96040 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 3.6L V6 | 91270 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OIL PUMP MECHANICAL | View on Amazon |
This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
2 Oil Pump Chain Tensioner parts for the 2019 Chevrolet Blazer come from 2 brands — CLOYES and S.A. GEAR.
This group includes CLOYES 96040 and S.A. GEAR 91270.
Oil Pump Control Valve / Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L L4 | 926238 | 🇺🇸 US 🇨🇦 CA | Located in Block | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12670746 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12741262 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | OPS404 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
4 Oil Pump Control Valve / Solenoid parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, DORMAN and STANDARD MOTOR PRODUCTS.
This group includes DORMAN 926238, GM GENUINE 12670746 and GM GENUINE 12741262 and the remaining parts above.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 048480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| ELRING Fits: 3.6L V6 | 048510 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: ACM (Polyacrylate)Number of Bores: 2 | View on Amazon |
| ELRING Fits: 3.6L V6 | 048490 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: ACM (Polyacrylate) | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
ELRING supplies the 3 Oil Pump Gasket parts for the 2019 Chevrolet Blazer.
This group includes ELRING 048480, ELRING 048510 and ELRING 048490.
Oil Pump Pickup Tube Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.6L V6 | 73744 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 12637179 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pump Pickup Tube Gasket parts are listed for the 2019 Chevrolet Blazer, from FEL-PRO and GM GENUINE.
Part numbers include FEL-PRO 73744 and GM GENUINE 12637179.
Oil Pump Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.6L V6 | S1122 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Driven | View on Amazon |
| CLOYES Fits: 3.6L V6 | S1121 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Driver | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12669395 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1416 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Pump sprockets.
4 Oil Pump Sprocket parts are listed for the 2019 Chevrolet Blazer, from CLOYES, GM GENUINE and S.A. GEAR.
This group includes CLOYES S1122, CLOYES S1121 and GM GENUINE 12669395 and the remaining parts above.
Oil Strainer Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 876720 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2019 Chevrolet Blazer — ELRING 876720.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12627170 | 🇺🇸 US 🇨🇦 CA | Piston Material: Aluminum Alloy | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12652807 | 🇺🇸 US 🇨🇦 CA | Piston Material: Aluminum | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12674055 | 🇺🇸 US 🇨🇦 CA | RightBase Model or Premier or RS Model | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12674056 | 🇺🇸 US 🇨🇦 CA | LeftBase Model or Premier or RS Model | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
GM GENUINE supplies the 4 Piston parts for the 2019 Chevrolet Blazer.
Part numbers include GM GENUINE 12627170, GM GENUINE 12652807 and GM GENUINE 12674055, among others listed above.
Piston Pin Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 01647383 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 12647160 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Piston Pin retainers.
2 Piston Pin Retainer parts for the 2019 Chevrolet Blazer come from GM GENUINE.
Listed part numbers: GM GENUINE 01647383 and GM GENUINE 12647160.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 19301821 | 🇺🇸 US 🇨🇦 CA | UpperFWD | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12665165 | 🇺🇸 US 🇨🇦 CA | Second Compression Ring Thickness (In): 0.059 In | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 19300260 | 🇺🇸 US 🇨🇦 CA | FWDTrans. code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12705385 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS Model | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L L4 | 2C4564S | 🇺🇸 US 🇨🇦 CA | Chrome Top Ring1 Cylinder Set | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.6L V6 | 2N5670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Setfor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
6 Piston Ring parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE and HASTINGS MANUFACTURING.
This group includes GM GENUINE 19301821, GM GENUINE 12665165 and GM GENUINE 19300260 and the remaining parts above.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 24100294 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 12693909 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12654646 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12666601 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| SKP Fits: 3.6L V6 | SKMR1323 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Base Model or Premier or RS ModelTrans. code 9T65 | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
5 Rocker Arm parts for the 2019 Chevrolet Blazer come from 2 brands — GM GENUINE and SKP. The "Popular" part is GM GENUINE 24100294. 1 part fits every engine; the other 4 are engine-specific.
Part numbers include GM GENUINE 24100294, GM GENUINE 12693909 and GM GENUINE 12654646, among others listed above.
Rocker Arm Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2019 Blazer engines | 11546449 | 🇺🇸 US 🇨🇦 CA | Black | View on Amazon |
This table covers the Rocker Arm nuts.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 11546449.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 12627107 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| CLOYES Fits: 2.5L L4 | C918 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.6L V6 | C951 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FVP Fits: 2.5L L4 | C918 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 12694716 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelOIL PUMP DRIVE CHAIN | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647895 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| MELLING Fits: 2.5L L4 | 1093 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | C7150 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.6L V6 | C1134 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
9 Timing Chain parts are listed for the 2019 Chevrolet Blazer, from GM GENUINE, CLOYES, FVP and 3 other brands. GM GENUINE 12627107 carries the "Popular" badge.
Listed part numbers: GM GENUINE 12627107, CLOYES C918 and CLOYES C951, plus the other parts above.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 2.5L L4 | CHK129 | 🇺🇸 US 🇨🇦 CA | Includes 2 Timing Chains, 2 Tensioners, 4 Guides, 2 Sprockets, Oil Squirter | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | TS17150 | 🇺🇸 US 🇨🇦 CA | Does Not Include Cam Sprocket | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | TS17151 | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Chain & Timing Chain | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 76369T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Camshaft SprocketIncludes 2 Chains, 2 Crank Sprockets, 2 Guides, 2 Tensioner Arms, 2 Tensioners | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 76369S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes 3 Chains, 2 Guides, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 76369 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Camshaft SprocketIncludes 3 Chains, 2 Crank Sprockets, 2 Guides, Oil Pump Sprocket, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 76369V | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Chains, 2 Crank Sprockets, 2 Guides, Oil Pump Sprocket, 2 Tensioner Arms, 3 Tensioners, 4 VVT Cams, 4 VVT Solenoids | View on Amazon |
| ULTRA-POWER Fits: 2.5L L4 | 90918SA | 🇺🇸 US 🇨🇦 CA | Balance Shaft Parts Not Includedwithout Camshaft Gear | View on Amazon |
| ULTRA-POWER Fits: 2.5L L4 | 90918SX | 🇺🇸 US 🇨🇦 CA | Timing Chain KitKit Includes Camshaft Kit & Balance Shaft Timing Kit | View on Amazon |
| ULTRA-POWER Fits: 2.5L L4 | 90918S | 🇺🇸 US 🇨🇦 CA | Timing Chain Kit with Balance Shaft Componentswithout Camshaft Gear | View on Amazon |
| ULTRA-POWER Fits: 3.6L V6 | 90951S | 🇺🇸 US 🇨🇦 CA | Sprockets Included | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.5L L4 | 90918SA | 🇺🇸 US 🇨🇦 CA | Balance Shaft Parts Not IncludedIncludes: Timing Chain, Timing Chain Tensioner, Timing Chain Guide (2), Timing Chain Tensioner Guide, Crankshaft Sprocket, Timing Gear Oiler | View on Amazon |
| CLOYES Popular Fits: 2.5L L4 | 90918SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes Timing Chain, Balance Shaft Chain, Timing Chain Tensioner, Balance Shaft Chain Tensioner, Timing Chain Guide (2), Balance Shaft Chain Guide, Timing Chain Tensioner Guide, Timing Gear Oiler | View on Amazon |
| CLOYES Popular Fits: 2.5L L4 | 90918S | 🇺🇸 US 🇨🇦 CA | Timing and Balance Chain KitIncludes: Timing Chain, Balance Shaft Chain, Timing Chain Tensioner, Balance Shaft Chain Tensioner, Timing Chain Guide (2), Balance Shaft Chain Guide, Timing Chain Tensioner Guide, Crankshaft Sprocket, Balance Shaft Sprocket, Timing Gear Oiler | View on Amazon |
| CLOYES Popular Fits: 3.6L V6 | 90951S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain Tensioner (2), Oil Pump Tensioner, Chain Tensioner Guide (2), Chain Guide (2), Timing Chain (2), Oil Pump Chain, Crankshaft Sprocket, Oil Pump Sprocket (2) | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12713649 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| CLOYES Fits: 2.5L L4 | 90918SAX | 🇺🇸 US 🇨🇦 CA | Balance Shaft Parts Not IncludedDoes Not Include Sprockets | View on Amazon |
| CLOYES Fits: 3.6L V6 | 90951SX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes Timing Chain Tensioner (2), Oil Pump Chain Tensioner, Timing Chain Tensioner Guide (2), Chain Guide (2), Timing Chain, Oil Pump Chain | View on Amazon |
| INA Fits: 2.5L L4 | ZC76314T | 🇺🇸 US 🇨🇦 CA | Includes 1 Chain, 1 Crank Sprocket, 2 Guides, 1 Tensioner Arm, 1 TensionerDoes Not Include Cam Sprocket | View on Amazon |
| MELLING Fits: 2.5L L4 | 31093SX | 🇺🇸 US 🇨🇦 CA | Does Not Include Sprockets | View on Amazon |
| MELLING Fits: 2.5L L4 | 31093S | 🇺🇸 US 🇨🇦 CA | Does Not Include Cam Sprocket | View on Amazon |
| MELLING Fits: 2.5L L4 | 31093SAX | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Chain & Timing ChainDoes Not Include Sprockets | View on Amazon |
| MELLING Fits: 2.5L L4 | 31093SA | 🇺🇸 US 🇨🇦 CA | Includes Balance Shaft Chain & Timing Chain | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
23 Timing Chain & Component Kit parts for the 2019 Chevrolet Blazer come from 8 brands — CLOYES, S.A. GEAR, ULTRA-POWER and 5 other brands. The "Popular" part is CLOYES 90918SA.
The Economy section: 11 options from S.A. GEAR, ULTRA-POWER, PREFERRED COMPONENTS INC and 1 other brand. GATES CHK129 is listed in this group.
Standard Replacement: 12 parts, from CLOYES, MELLING, GM GENUINE and 1 other brand. A representative part number is CLOYES 90918SA.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 12627184 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 12627112 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Popular Fits: 2.5L L4 | 12627111 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Popular Fits: all 2019 Blazer engines | 11588725 | 🇺🇸 US 🇨🇦 CA | GUIDE BOLT ONLYBase Model | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 11561619 | 🇺🇸 US 🇨🇦 CA | Guide Bolt OnlyBase Model or Premier or RS Model | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95950 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95949 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95948 | 🇺🇸 US 🇨🇦 CA | Tensioner Arm | View on Amazon |
| CLOYES Fits: 3.6L V6 | 96044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 3.6L V6 | 96043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 3.6L V6 | 96041 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| CLOYES Fits: 3.6L V6 | 96042 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmLeft | View on Amazon |
| MELLING Fits: 2.5L L4 | BG5148 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| MELLING Fits: 2.5L L4 | BG5149 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MELLING Fits: 2.5L L4 | BT5207 | 🇺🇸 US 🇨🇦 CA | Tensioner Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76247 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76164 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | R76246 | 🇺🇸 US 🇨🇦 CA | Tensioner Arm | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 91269 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmRight Only | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 91273 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LEFTARM ONLY | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 71205 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 71206 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
22 Timing Chain Guide / Damper parts are listed for the 2019 Chevrolet Blazer, from CLOYES, GM GENUINE, S.A. GEAR and 2 other brands. GM GENUINE 12627184 carries the "Popular" badge. 1 part fits every engine; the other 21 are engine-specific.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2019 Blazer engines | 11588725 | 🇺🇸 US 🇨🇦 CA | M8X1.25X35Tensioner Bolt Only | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12713640 | 🇺🇸 US 🇨🇦 CA | LeftBase Model or Premier or RS Model | View on Amazon |
| CLOYES Fits: 2.5L L4 | 95947 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.6L V6 | 96039 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| CLOYES Fits: 3.6L V6 | 96038 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12627109 | 🇺🇸 US 🇨🇦 CA | Trans. Code 9T509 speed Automatic trans. | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12713641 | 🇺🇸 US 🇨🇦 CA | Mounting Bracket Included: No | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12713639 | 🇺🇸 US 🇨🇦 CA | Mounting Bracket Included: No | View on Amazon |
| MELLING Fits: 2.5L L4 | BT5206 | 🇺🇸 US 🇨🇦 CA | Includes Gasket and Two Mounting Bolts | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | T66204 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.6L V6 | 91271 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 91272 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
12 Timing Chain Tensioner parts for the 2019 Chevrolet Blazer come from 5 brands — GM GENUINE, CLOYES, S.A. GEAR and 2 other brands. The "Popular" part is GM GENUINE 11588725. 1 part fits every engine; the other 11 are engine-specific.
Timing Chain Tensioner Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 237220 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftFWD | View on Amazon |
| ELRING Fits: 3.6L V6 | 237210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightFWD | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12627110 | 🇺🇸 US 🇨🇦 CA | FWDTrans. code 9T50 | View on Amazon |
This table covers the seals at the Timing Chain Tensioner Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Timing Chain Tensioner Gasket / Seal parts are listed for the 2019 Chevrolet Blazer, from ELRING and GM GENUINE.
This group includes ELRING 237220, ELRING 237210 and GM GENUINE 12627110.
Timing Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 25203060 | 🇺🇸 US 🇨🇦 CA | FrontFWD | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12729377 | 🇺🇸 US 🇨🇦 CA | Mounting Hardware Included: YES | View on Amazon |
This table covers the Timing covers.
GM GENUINE supplies both parts for the 2019 Chevrolet Blazer.
Part numbers include GM GENUINE 25203060 and GM GENUINE 12729377.
Timing Cover Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2019 Blazer engines | 11588714 | 🇺🇸 US 🇨🇦 CA | Bolt Type: Hex Head Acorn Flange | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11547697 | 🇺🇸 US 🇨🇦 CA | M10X1.5X57BOLT-HEXFLANGE, 5 SOCKET,22.3 OD | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11588725 | 🇺🇸 US 🇨🇦 CA | M8X1.25X35 | View on Amazon |
| GM GENUINE Fits: all 2019 Blazer engines | 11588732 | 🇺🇸 US 🇨🇦 CA | M8X1X70HFH | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11548171 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Timing Cover bolts.
5 Timing Cover Bolt parts for the 2019 Chevrolet Blazer come from GM GENUINE. The "Popular" part is GM GENUINE 11588714. 4 parts fit every engine; the other 1 is engine-specific.
Part numbers include GM GENUINE 11588714, GM GENUINE 11547697 and GM GENUINE 11588725, among others listed above.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12647891 | 🇺🇸 US 🇨🇦 CA | LeftBase Model or Premier or RS Model | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647888 | 🇺🇸 US 🇨🇦 CA | RightBase Model or Premier or RS Model | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Timing Cover Gasket parts for the 2019 Chevrolet Blazer come from GM GENUINE.
This group includes GM GENUINE 12647891 and GM GENUINE 12647888.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.5L L4 | S1369 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.5L L4 | S1099 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.6L V6 | S1120 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FVP Fits: 2.5L L4 | S1099 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 2.5L L4 | 12627108 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.5L L4 | G56383 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.6L V6 | S1415 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
7 Timing Crank Sprocket parts for the 2019 Chevrolet Blazer come from 6 brands — CLOYES, MELLING, FVP and 3 other brands. The "Popular" part is MELLING S1369.
This group includes MELLING S1369, CLOYES S1099 and CLOYES S1120 and the remaining parts above.
Timing Gear Oiler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | 95951 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 2.5L L4 | 95951 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oilers that spray the timing gears.
2 Timing Gear Oiler parts for the 2019 Chevrolet Blazer come from 2 brands — CLOYES and FVP.
Part numbers include CLOYES 95951, among others listed above.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | TIH71 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Inlet | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
This group shows a single part: STANDARD MOTOR PRODUCTS TIH71.
Turbocharger Oil Line Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12662187 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: GM GENUINE 12662187.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12686424 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12714147 | 🇺🇸 US 🇨🇦 CA | Mounting Hardware Included: YES | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12714148 | 🇺🇸 US 🇨🇦 CA | Mounting Hardware Included: YES | View on Amazon |
This table covers the Valve covers.
GM GENUINE supplies the 3 Valve Cover parts for the 2019 Chevrolet Blazer.
Listed part numbers: GM GENUINE 12686424, GM GENUINE 12714147 and GM GENUINE 12714148.
Valve Cover Bolt / Screw
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2019 Blazer engines | 11519038 | 🇺🇸 US 🇨🇦 CA | with Adhesive On ThreadsM6X1X30 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11547061 | 🇺🇸 US 🇨🇦 CA | Bolt Type: Hex Flanged | View on Amazon |
This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.
GM GENUINE supplies both parts for the 2019 Chevrolet Blazer. 1 part fits every engine; the other 1 is engine-specific.
This group includes GM GENUINE 11519038 and GM GENUINE 11547061.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 12634516 | 🇺🇸 US 🇨🇦 CA | IntakeFWD | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 12634517 | 🇺🇸 US 🇨🇦 CA | Configuration: ONE PieceMaterial: Rubber | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12649907 | 🇺🇸 US 🇨🇦 CA | RightBase Model or Premier or RS Model | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12649906 | 🇺🇸 US 🇨🇦 CA | LeftBase Model or Premier or RS Model | View on Amazon |
| AJUSA Fits: 3.6L V6 | 11177900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.6L V6 | 048600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightFWD | View on Amazon |
| ELRING Fits: 3.6L V6 | 048630 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FWDBase Model | View on Amazon |
| FEL-PRO Fits: 2.5L L4 | VS50961R1 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 2.5L L4 | 12635744 | 🇺🇸 US 🇨🇦 CA | InnerFWD | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12627105 | 🇺🇸 US 🇨🇦 CA | InnerFWD | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 12635953 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Fits: 2.5L L4 | 25203703 | 🇺🇸 US 🇨🇦 CA | Configuration: Multi Piece | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | VS50752 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | VS50915 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Valve Cover Gasket parts for the 2019 Chevrolet Blazer come from 5 brands — GM GENUINE, ELRING, MAHLE / CLEVITE and 2 other brands. The "Popular" part is GM GENUINE 12634516.
Valve Cover Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12654651 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
This table covers the Valve Cover washers.
One part is listed for the 2019 Chevrolet Blazer — GM GENUINE 12654651.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2019 Blazer engines | HL129 | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| MELLING Popular Fits: all 2019 Blazer engines | JB7524 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic | View on Amazon |
| AJUSA Fits: all 2019 Blazer engines | 85018700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 12690246 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| QUALCAST Fits: all 2019 Blazer engines | 367082 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Lash Adjuster | View on Amazon |
| SBI Fits: all 2019 Blazer engines | VL175 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: all 2019 Blazer engines | HT2307 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
7 Valve Lifter parts for the 2019 Chevrolet Blazer come from 6 brands — GM GENUINE, MELLING, AJUSA and 3 other brands. The "Popular" part is GM GENUINE HL129. 6 parts fit every engine; the other 1 is engine-specific.
Part numbers include GM GENUINE HL129, MELLING JB7524 and AJUSA 85018700, among others listed above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12686721 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| MELLING Fits: 2.5L L4 | VS1588 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | VS1700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: all 2019 Blazer engines | 325001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.729 Free Length. Conical | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 326700 | 🇺🇸 US | Intake and ExhaustBase Model | View on Amazon |
| SBI Fits: 2.5L L4 | 1601588 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust1.729 Length | View on Amazon |
| SBI Fits: 3.6L V6 | 1601700 | 🇺🇸 US 🇨🇦 CA | Conical | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
7 Valve Spring parts are listed for the 2019 Chevrolet Blazer, from MELLING, QUALCAST, SBI and 1 other brand. 1 part fits every engine; the other 6 are engine-specific.
Listed part numbers: GM GENUINE 12686721, MELLING VS1588 and MELLING VS1700, plus the other parts above.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12575196 | 🇺🇸 US 🇨🇦 CA | FWDTrans. code 9T50 | View on Amazon |
| MELLING Fits: 2.5L L4 | VSR713 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | VSR723 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve Spring retainers.
3 Valve Spring Retainer parts are listed for the 2019 Chevrolet Blazer, from MELLING and GM GENUINE.
Listed part numbers: GM GENUINE 12575196, MELLING VSR713 and MELLING VSR723.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 2.5L L4 | 12575197 | 🇺🇸 US 🇨🇦 CA | Material: Steel | View on Amazon |
| MELLING Fits: 2.5L L4 | VL1099 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | VL1098 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.5L L4 | 345032 | 🇺🇸 US 🇨🇦 CA | 1 Round Mid Bead. 0.235 Stem DIA. | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 345021 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3 Round Beads. 0.234 Stem | View on Amazon |
| SBI Fits: 2.5L L4 | 1211127 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.1955 Length | View on Amazon |
| SBI Fits: 3.6L V6 | 1211098 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2050 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
7 Valve Spring Retainer Keeper parts are listed for the 2019 Chevrolet Blazer, from MELLING, QUALCAST, SBI and 1 other brand.
Listed part numbers: GM GENUINE 12575197, MELLING VL1099 and MELLING VL1098, plus the other parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L L4 | SS729421 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 19207664 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12668832 | 🇺🇸 US 🇨🇦 CA | Base Model or Premier or RS ModelTrans.Code 9T65 | View on Amazon |
| APEX Fits: 2.5L L4 | AVS13057 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 3.6L V6 | 048010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Valve Stem Diameter [MM]: 5 | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | SS74089 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L L4 | SS46084 | 🇺🇸 US 🇨🇦 CA | Fluoroelastomer | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | SS46124 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 2.5L L4 | 38603655 | 🇺🇸 US 🇨🇦 CA | Height (mm): 20.02Viton Top Hat. | View on Amazon |
| SBI Fits: 2.5L L4 | 1221418 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| SBI Fits: 3.6L V6 | 1221509 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 121026301 | 🇺🇸 US 🇨🇦 CA | SetContains 24 Pieces | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 | 121014801 | 🇺🇸 US 🇨🇦 CA | SetContains 16 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
13 Valve Stem Seal parts for the 2019 Chevrolet Blazer come from 8 brands — FEL-PRO, GM GENUINE, MAHLE / CLEVITE and 5 other brands. The "Popular" part is FEL-PRO SS729421.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 2.5L L4 | SK916935 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ULTRA-POWER Popular Fits: 2.5L L4 | 916935 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ULTRA-POWER Popular Fits: 2.5L L4 | 916937 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| DORMAN Fits: 2.5L L4 | 916937 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| DORMAN Fits: 2.5L L4 | 916935 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| GATES Fits: 2.5L L4 | VVS238 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| GATES Fits: 2.5L L4 | VVS239 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| ROSTRA Fits: 2.5L L4 | 790007 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ROSTRA Fits: 2.5L L4 | 790009 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| SKP Fits: 2.5L L4 | SK916937 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| SPECTRA PREMIUM Fits: 2.5L L4 | VTS1157 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| WALKER PRODUCTS Fits: 2.5L L4 | 5901173 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| WALKER PRODUCTS Fits: 2.5L L4 | 5901174 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 2.5L L4 | 2T1191 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| WELLS Fits: 2.5L L4 | 2T1192 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 12662736 | 🇺🇸 US 🇨🇦 CA | IntakeFWD | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 12662737 | 🇺🇸 US 🇨🇦 CA | ExhaustFWD | View on Amazon |
| CLOYES Fits: 2.5L L4 | VTS131 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| CLOYES Fits: 2.5L L4 | VTS135 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| MELLING Fits: 2.5L L4 | VCTS1021E | 🇺🇸 US 🇨🇦 CA | ExhaustBlack Connector | View on Amazon |
| MELLING Fits: 2.5L L4 | VCTS1021I | 🇺🇸 US 🇨🇦 CA | IntakeWhite Connector | View on Amazon |
| NTK Fits: 2.5L L4 | VV0144 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| NTK Fits: 2.5L L4 | VV0145 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT296 | 🇺🇸 US 🇨🇦 CA | Blue Streak | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT298 | 🇺🇸 US 🇨🇦 CA | Blue Streak | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
25 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2019 Chevrolet Blazer come from 13 brands — SKP, ULTRA-POWER, DORMAN and 10 other brands. The "Popular" part is SKP SK916935.
The Economy section: 15 options from SKP, ULTRA-POWER, DORMAN and 5 other brands. SKP SK916935 is listed in this group.
Standard Replacement: 10 parts, from GM GENUINE, CLOYES, MELLING and 2 other brands. A representative part number is GM GENUINE 12662736.
Variable Valve Timing (VVT) Sprocket
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Fits: 2.5L L4 | 916938 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 2.5L L4 | 25203206 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GM GENUINE Popular Fits: 2.5L L4 | 25203205 | 🇺🇸 US 🇨🇦 CA | FWDTrans.Code 9T50 | View on Amazon |
| GATES Fits: 2.5L L4 | VCP936 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT633 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT617 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
6 Variable Valve Timing (VVT) Sprocket parts for the 2019 Chevrolet Blazer come from 4 brands — GM GENUINE, STANDARD MOTOR PRODUCTS, ULTRA-POWER and 1 other brand. The "Popular" part is GM GENUINE 25203206.
The Economy section: 1 option from ULTRA-POWER. ULTRA-POWER 916938 is listed in this group.
Standard Replacement: 5 parts, from GM GENUINE, STANDARD MOTOR PRODUCTS and GATES. A representative part number is GM GENUINE 25203206.
This group includes GM GENUINE 25203206, ULTRA-POWER 916938 and GM GENUINE 25203205 and the remaining parts above.
Variable Valve Timing (VVT) Sprocket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | VCB107 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 2.5L L4 | 74114 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.5L L4 | VCTB1009 | 🇺🇸 US 🇨🇦 CA | Torque To Yield Bolt | View on Amazon |
This table covers the Variable Valve Timing (VVT) Sprocket bolts.
3 Variable Valve Timing (VVT) Sprocket Bolt parts are listed for the 2019 Chevrolet Blazer, from CLOYES, DORMAN and MELLING.
Part numbers include CLOYES VCB107, DORMAN 74114 and MELLING VCTB1009.
Buying Engine Parts for a 2019 Chevrolet Blazer
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2019 Chevrolet Blazer?
Our catalog currently lists 523 engine parts for the 2019 Chevrolet Blazer across 96 subcategories and 58 brands, covering both the 2.5L L4 and the 3.6L V6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2019 Chevrolet Blazer engines?
Some do. 49 parts fit every engine; the other 474 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2019 Chevrolet Blazer?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2019 Chevrolet Blazer?
Oil rows on this page include SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Chevrolet Blazer was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 Chevrolet Blazer?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 Chevrolet Blazer
Engine Parts for Other Chevrolet Blazer Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.