2020 Chevrolet Suburban Engine Parts

This table covers the Barometric pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

One part is listed for the 2020 Chevrolet Suburban — GM GENUINE 12711681.

This table covers the camshafts that open the valves. Read more

14 Camshaft parts are listed for the 2020 Chevrolet Suburban, from MELLING, ENGINETECH, GM GENUINE and 1 other brand. MELLING 22329 carries the "Popular" badge. 7 parts fit every engine; the other 7 are engine-specific.

In the Heavy Duty / Towing grade, MELLING supplies 1 part: grouped under the catalog's "Heavy Duty / Towing" designation — the notes column spells out what sets them apart. A representative part number is MELLING 22142.

In the High Performance grade, MELLING supplies 6 parts: engineered beyond original-equipment specification. A representative part number is MELLING 22329.

The Standard Replacement section lists 7 options from MELLING, ENGINETECH, GM GENUINE and 1 other brand — built to original-equipment specification. GM GENUINE 12619823 is listed in this group.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Camshaft Bearing parts are listed for the 2020 Chevrolet Suburban, from GM GENUINE and MAHLE / CLEVITE. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 12686894 and MAHLE / CLEVITE SH2231S.

This table covers the Camshaft bolts. Read more

This group shows a single part: ELRING 857390.

This table covers the Camshaft Dowel pins. Read more

One part is listed for the 2020 Chevrolet Suburban — GM GENUINE 24575061.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

8 Camshaft Retainer / Thrust Plate parts for the 2020 Chevrolet Suburban come from 6 brands — APEX, ELRING, FEL-PRO and 3 other brands. The "Popular" part is FEL-PRO ES73115. Every part fits both the 5.3L V8 and the 6.2L V8.

This group includes FEL-PRO ES73115, MELLING MF127 and APEX AES319 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2020 Chevrolet Suburban come from 2 brands — AJUSA and VICTOR REINZ. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: AJUSA 01713900 and VICTOR REINZ 711836900.

This table covers the connecting rods between each piston and the crankshaft. Read more

GM GENUINE supplies both parts for the 2020 Chevrolet Suburban.

Part numbers include GM GENUINE 12649190 and GM GENUINE 12714549.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

24 Connecting Rod Bearing parts are listed for the 2020 Chevrolet Suburban, from MAHLE / CLEVITE, ENGINETECH, GM GENUINE and 1 other brand. ENGINETECH BB253J carries the "Popular" badge.

High Performance: 11 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE CB663HN.

The Standard Replacement section: 11 options from MAHLE / CLEVITE, ENGINETECH, SEALED POWER and 1 other brand. ENGINETECH BB253J is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

2 Connecting Rod Bolt parts for the 2020 Chevrolet Suburban come from GM GENUINE.

Part numbers include GM GENUINE 11570662 and GM GENUINE 11548432.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2020 Chevrolet Suburban, from AJUSA, ELRING, FEL-PRO and 3 other brands. FEL-PRO CS26744 carries the "Popular" badge. 5 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: FEL-PRO CS26744, SKP SKCS26744 and AJUSA 54323200, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2020 Chevrolet Suburban — GM GENUINE 12685650.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts for the 2020 Chevrolet Suburban come from 4 brands — ENGINETECH, KING ENGINE BEARINGS, GM GENUINE and 1 other brand.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5013XP is listed in this group.

Standard Replacement: 3 parts, from ENGINETECH, GM GENUINE and MAHLE / CLEVITE. A representative part number is ENGINETECH BC623J.

4 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include KING ENGINE BEARINGS MB5013XP, KING ENGINE BEARINGS MB5013XPX and ENGINETECH BC623J, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

4 Crankshaft Main Bearing Cap Bolt parts are listed for the 2020 Chevrolet Suburban, from GM GENUINE and ELRING. All of them fit every engine offered in the 2020 Suburban.

This group includes ELRING B75610, GM GENUINE 11546565 and GM GENUINE 11548076 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts for the 2020 Chevrolet Suburban come from 7 brands — GM GENUINE, APEX, FEL-PRO and 4 other brands. The "Popular" part is FEL-PRO BS40765. 11 parts fit every engine; the other 3 are engine-specific.

This table covers the Crankshaft Seal covers. Read more

3 Crankshaft Seal Cover parts are listed for the 2020 Chevrolet Suburban, from GM GENUINE and DORMAN. 2 parts fit every engine; the other 1 is engine-specific.

This group includes DORMAN 635786, GM GENUINE 12705663 and GM GENUINE 12705665.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Crankshaft Seal Gasket parts are listed for the 2020 Chevrolet Suburban, from ELRING and GM GENUINE. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: ELRING 837760, ELRING 451040 and ELRING 860570, plus the other parts above.

This table covers the kits that disable cylinder deactivation. Read more

4 Cylinder Deactivation Delete parts for the 2020 Chevrolet Suburban come from MELLING.

This group includes MELLING MDK400, MELLING MDK400HPT and MELLING MDK700 and the remaining parts above.

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2020 Chevrolet Suburban — MELLING MDKP1.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: GM GENUINE 12697806.

This table covers the cylinder heads that close the top of the block. Read more

This group shows a single part: GM GENUINE 12699617.

This table covers the Cylinder Head Alignment Dowel pins. Read more

4 Cylinder Head Alignment Dowel Pin parts are listed for the 2020 Chevrolet Suburban, from GM GENUINE and PIONEER. 1 part fits every engine; the other 3 are engine-specific.

Part numbers include GM GENUINE 12570326, GM GENUINE 90351710 and PIONEER S1115, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2020 Chevrolet Suburban, from GM GENUINE, APEX, FEL-PRO and 1 other brand. GM GENUINE 11546959 carries the "Popular" badge. All of them fit every engine offered in the 2020 Suburban.

Part numbers include GM GENUINE 11546959, APEX AHB1351 and FEL-PRO ES73121, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Cylinder Head Gasket parts are listed for the 2020 Chevrolet Suburban, from ENGINE PRO, FEL-PRO, GM GENUINE and 5 other brands. FEL-PRO 26744PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts are listed for the 2020 Chevrolet Suburban, from FEL-PRO, GM GENUINE, ENGINETECH and 5 other brands. FEL-PRO HS26749PT carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 24502262.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

One part is listed for the 2020 Chevrolet Suburban — MELLING CSL355F.

This table covers the Engine Block drain plugs. Read more

GM GENUINE supplies both parts for the 2020 Chevrolet Suburban. All of them fit every engine offered in the 2020 Suburban.

Part numbers include GM GENUINE 11602951 and GM GENUINE 11546667.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2020 Chevrolet Suburban come from 2 brands — GM GENUINE and KAT'S HEATERS. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 12586687 and KAT'S HEATERS 28510.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2020 Chevrolet Suburban, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2020 Suburban.

Part numbers include TECHPRO GM1228194, among others listed above.

This table covers the Engine Cover grommets. Read more

This group shows a single part: GM GENUINE 12594875.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2020 Chevrolet Suburban, from AJUSA, ELRING and FEL-PRO.

This group includes AJUSA 50552300, AJUSA 50530700 and ELRING 919250 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 2020 Chevrolet Suburban come from 5 brands — GM GENUINE, MELLING, QUALCAST and 2 other brands. The "Popular" part is GM GENUINE 12678745.

Part numbers include GM GENUINE 12678745, ENGINETECH V3433 and GM GENUINE 12678746, among others listed above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2020 Chevrolet Suburban — WELLS 5T5014.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2020 Chevrolet Suburban, from ATP, DORMAN, GM GENUINE and 1 other brand. All of them fit every engine offered in the 2020 Suburban.

Listed part numbers: ATP 102406, DORMAN 594716 and GM GENUINE 12684590, plus the other parts above.

This table covers the Harmonic Balancer bolts. Read more

2 Harmonic Balancer Bolt parts for the 2020 Chevrolet Suburban come from 2 brands — FEL-PRO and GM GENUINE. Every part fits both the 5.3L V8 and the 6.2L V8.

This group includes FEL-PRO 73372 and GM GENUINE 11547372.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

4 Intake Manifold parts for the 2020 Chevrolet Suburban come from 2 brands — GM GENUINE and VAICO.

This group includes GM GENUINE 12748173, GM GENUINE 12748172 and VAICO V510597 and the remaining parts above.

This table covers the Intake Manifold bolts. Read more

GM GENUINE supplies both parts for the 2020 Chevrolet Suburban. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: GM GENUINE 11610472 and GM GENUINE 11611692.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts are listed for the 2020 Chevrolet Suburban, from MAHLE / CLEVITE, FEL-PRO, APEX and 4 other brands. FEL-PRO MS97402 carries the "Popular" badge. 9 parts fit every engine; the other 3 are engine-specific.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts for the 2020 Chevrolet Suburban come from 5 brands — MELLING, QUALCAST, GM GENUINE and 2 other brands. The "Popular" part is GM GENUINE 12619825.

Listed part numbers: GM GENUINE 12619825 and ENGINETECH V3432, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

18 Motor Mount parts for the 2020 Chevrolet Suburban come from 6 brands — ANCHOR, PIONEER, WESTAR and 3 other brands. The "Popular" part is ANCHOR 3275. Every part fits both the 5.3L V8 and the 6.2L V8.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SKMA5738 is listed in this group.

Standard Replacement: 16 parts, from ANCHOR, PIONEER, WESTAR and 2 other brands. A representative part number is ANCHOR 3275.

This table covers the Motor Mount bolts. Read more

GM GENUINE supplies both parts for the 2020 Chevrolet Suburban. All of them fit every engine offered in the 2020 Suburban.

Part numbers include GM GENUINE 11588273 and GM GENUINE 11517639.