2021 Chevrolet Beat Suspension Parts

Engine:
1.2L L4

19 Suspension parts are listed for the 2021 Chevrolet Beat, in 6 part types, covering the 1.2L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The suspension system on the 2021 Chevrolet Beat controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. The largest groups are Control Arm (6 parts), Control Arm Bushing (4 parts) and Shock / Strut (4 parts). The other 3 part types cover the remaining 5 parts.

Axle Bushing

Brand Part Number Markets Notes Buy
DORMAN 533026
🇲🇽 MX
Rear
View on
Amazon

This table covers the Axle bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Ball Joint

Daily Driver

Brand Part Number Markets Notes Buy
DORMAN 539740
🇲🇽 MX
Front Lower
View on
Amazon

Economy

Brand Part Number Markets Notes Buy
FVP BJ55075
🇲🇽 MX
Front Lower
View on
Amazon

This table covers the ball joints that articulate each control arm at the knuckle.

Control Arm

Daily Driver

Brand Part Number Markets Notes Buy
DORMAN 524455
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — DORMAN 524455
Complete Arm with Ball Joint
Front Left Lower
View on
Amazon
DORMAN 524456
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — DORMAN 524456
Complete Arm with Ball Joint
Front Right Lower
View on
Amazon

Economy

Brand Part Number Markets Notes Buy
SKP Popular SK622430
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — SKP SK622430
Complete Arm with Ball Joint
Front Right Lower
View on
Amazon
SKP Popular SK622429
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — SKP SK622429
Complete Arm with Ball Joint
Front Left Lower
View on
Amazon
FVP CB55043
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — FVP CB55043
Complete Arm with Ball Joint
Front Left Lower
View on
Amazon
FVP CB55044
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — FVP CB55044
Complete Arm with Ball Joint
Front Right Lower
View on
Amazon

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.

Control Arm Bushing

Brand Part Number Markets Notes Buy
DORMAN 533706
🇲🇽 MX
Front Lower Forward
View on
Amazon
DORMAN 540838
🇲🇽 MX
Front Lower Rearward
View on
Amazon
FVP BC55029
🇲🇽 MX
Front Lower Forward
View on
Amazon
FVP CAS55160
🇲🇽 MX
Front Lower Rearward
View on
Amazon

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Shock / Strut

Brand Part Number Markets Notes Buy
FCS 346084
🇲🇽 MX
Rear
View on
Amazon
FCS 334016L
🇲🇽 MX
Front Left
View on
Amazon
FCS 334016R
🇲🇽 MX
Front Right
View on
Amazon
TOP NOTCH SS0625
🇲🇽 MX
Suspension Shocks
Fitment notes — TOP NOTCH SS0625
Suspension Shocks
Rear
View on
Amazon

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed.

Buying Suspension Parts for a 2021 Chevrolet Beat

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Confirm you have the 1.2L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Control Arm and Control Arm Bushing .

Frequently Asked Questions

How many suspension parts fit the 2021 Chevrolet Beat?

Our catalog currently lists 19 suspension parts for the 2021 Chevrolet Beat across 6 subcategories and 5 brands, covering the 1.2L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of suspension problems on a 2021 Chevrolet Beat?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Chevrolet Beat was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Chevrolet Beat?

Every part on this page is matched to the 1.2L L4 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Chevrolet Beat

Suspension Parts for Other Chevrolet Beat Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.