2004 Chrysler 300M Engine Parts

This table covers the gaskets that seal the Camshaft Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2004 Chrysler 300M — FEL-PRO ES73216.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 2004 Chrysler 300M come from 5 brands — TIMKEN, BCA, NATIONAL and 2 other brands. The "Popular" part is TIMKEN KWK99112.

Part numbers include TIMKEN KWK99112, BCA NS99146 and NATIONAL 99146, among others listed above.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: MOPAR 4556518AB.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts for the 2004 Chrysler 300M come from 13 brands — AJUSA, MOPAR, APEX and 10 other brands. The "Popular" part is APEX ATC2360.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2004 Chrysler 300M — ENGINETECH ECR119.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2004 Chrysler 300M, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. ENGINETECH BB103J carries the "Popular" badge.

This group includes ENGINETECH BB103J, MAHLE / CLEVITE CB1669A6 and KING ENGINE BEARINGS CR6810SI and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 2004 Chrysler 300M, from APEX, ENGINETECH, AJUSA and 4 other brands. APEX ACS2038 carries the "Popular" badge.

Part numbers include APEX ACS2038, ENGINETECH CR215CSB and AJUSA 54115200, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts are listed for the 2004 Chrysler 300M, from CRANKSHAFT REBUILDERS and ENGINETECH.

In the Economy grade, CRANKSHAFT REBUILDERS supplies 1 part: the catalog's value-priced group. A representative part number is CRANKSHAFT REBUILDERS 31350.

The Standard Replacement section lists 1 option from ENGINETECH — built to original-equipment specification. ENGINETECH 139300 is listed in this group.

Listed part numbers: CRANKSHAFT REBUILDERS 31350 and ENGINETECH 139300.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2004 Chrysler 300M come from 3 brands — MAHLE / CLEVITE, ENGINETECH and KING ENGINE BEARINGS.

This group includes ENGINETECH BC106J, KING ENGINE BEARINGS MB4103SI and MAHLE / CLEVITE MS2210A and the remaining parts above.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 2004 Chrysler 300M — FEL-PRO 16262.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2004 Chrysler 300M come from 3 brands — SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3462, TIMKEN KWK99112 and WJB / INMOTION PARTS WS99112.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: VICTOR REINZ 711457400.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts for the 2004 Chrysler 300M come from 13 brands — FEL-PRO, TIMKEN, VICTOR REINZ and 10 other brands. The "Popular" part is BCA NS3638.

This table covers the cylinder heads that close the top of the block. Read more

This group shows a single part: CYLINDER HEAD EXPRESS CH3501V.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2004 Chrysler 300M, from FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. FEL-PRO ES72895 carries the "Popular" badge.

This group includes FEL-PRO ES72895, MAHLE / CLEVITE GS33373 and APEX AHB236 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts are listed for the 2004 Chrysler 300M, from APEX, FEL-PRO, ELRING and 4 other brands. APEX AHG280L carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 2004 Chrysler 300M, from ENGINETECH, FEL-PRO, SKP and 6 other brands. ENGINETECH CR215HSD carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 4556020AB.

This table covers the Cylinder Head Spacer shims. Read more

3 Cylinder Head Spacer Shim parts are listed for the 2004 Chrysler 300M, from SBI and ENGINETECH.

This group includes ENGINETECH CHS1060, SBI 2302072L and SBI 2302072R.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 2004 Chrysler 300M.

Listed part numbers: MELLING CSL173 and MELLING CSL273.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2004 Chrysler 300M come from 2 brands — KAT'S HEATERS and MOPAR.

This group includes KAT'S HEATERS 11814 and MOPAR 4609325.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2004 Chrysler 300M, from AJUSA, ENGINETECH and MAHLE / CLEVITE.

Part numbers include AJUSA 50210500, ENGINETECH CR215K1 and MAHLE / CLEVITE 953642.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2004 Chrysler 300M — ENGINETECH RCCR215CP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2004 Chrysler 300M come from 5 brands — SKP, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is SKP SKV2787.

This group includes SKP SKV2787, ENGINETECH V2787 and MAHLE / CLEVITE 2113214 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

ENGINETECH supplies both parts for the 2004 Chrysler 300M.

Listed part numbers: ENGINETECH PK68 and ENGINETECH PK68B.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2004 Chrysler 300M, from SKP, DORMAN, ATP and 2 other brands. DORMAN 594183 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SK594183.

The Standard Replacement section: 4 options from DORMAN, ATP, DAYCO and 1 other brand. DORMAN 594183 is listed in this group.

Listed part numbers: DORMAN 594183, SKP SK594183 and ATP 102158, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts for the 2004 Chrysler 300M come from MOPAR.

Listed part numbers: MOPAR 5080720AB and MOPAR 5080818AA.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2004 Chrysler 300M, from MAHLE / CLEVITE, APEX, FEL-PRO and 2 other brands. APEX AMS2360 carries the "Popular" badge.

Part numbers include APEX AMS2360, FEL-PRO MS92165 and MAHLE / CLEVITE MS16210A, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts for the 2004 Chrysler 300M come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO MS91990.

Listed part numbers: FEL-PRO MS91990, MAHLE / CLEVITE MS16508 and AJUSA 00986200, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2004 Chrysler 300M come from 5 brands — SKP, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is SKP SKV1901.

Listed part numbers: SKP SKV1901, ENGINETECH V3408 and MAHLE / CLEVITE 2114122, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2004 Chrysler 300M come from 4 brands — WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. The "Popular" part is ANCHOR 2903.

This group includes ANCHOR 2903, DEA / MARMON RIDE CONTROL A2903 and PIONEER 612903 and the remaining parts above.

This table covers the isolators in an engine mount. Read more

MOPAR supplies the 4 Motor Mount Isolator parts for the 2004 Chrysler 300M.

This group includes MOPAR 4593184, MOPAR 4593184AB and MOPAR 4593287 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300508.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

53 Oil parts for the 2004 Chrysler 300M come from 6 brands — VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Oil Cooler Line parts for the 2004 Chrysler 300M come from 2 brands — DORMAN and SUNSONG.

Part numbers include DORMAN 625400, DORMAN 625204 and SUNSONG 5801029, among others listed above.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2004 Chrysler 300M.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: MOPAR 4663862AE.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2004 Chrysler 300M come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is AGS ODP00007.

Listed part numbers: AGS ODP00007, DORMAN 090053 and DORMAN 090115, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2004 Chrysler 300M, from MAHLE / CLEVITE, APEX, ELRING and 2 other brands. MAHLE / CLEVITE 2051 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE 2051, APEX ADP1902 and ELRING 176090, among others listed above.

This table covers the caps on the oil filler neck. Read more

6 Oil Filler Cap parts for the 2004 Chrysler 300M come from 6 brands — DORMAN, GATES, CALORSTAT and 3 other brands. The "Popular" part is DORMAN 80984.

Part numbers include DORMAN 80984, GATES 31118 and CALORSTAT OC2317, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts for the 2004 Chrysler 300M come from 17 brands — BOSCH, FRAM, VARIOUS MFR and 14 other brands. The "Popular" part is MOBIL M1204A.

The Economy section: 7 options from BOSCH, ECOGARD, FRAM and 4 other brands. BOSCH 72137WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1204A is listed in this group.

Standard Replacement: 12 parts, from FRAM, MOTORCRAFT, WIX and 9 other brands. A representative part number is FRAM PH16.

This table covers the Oil Filter adapters. Read more

One part is listed for the 2004 Chrysler 300M — MOPAR 53007563AB.