2004 Chrysler Intrepid Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: MOPAR 4792063AB.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

One part is listed for the 2004 Chrysler Intrepid — BCA NS99146.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRC31.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts for the 2004 Chrysler Intrepid come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. The "Popular" part is MAHLE / CLEVITE CB1670A.

This group includes MAHLE / CLEVITE CB1670A, MAHLE / CLEVITE CB1670A6 and KING ENGINE BEARINGS CR6780SI and the remaining parts above.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2004 Chrysler Intrepid — MOPAR 6504720.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2004 Chrysler Intrepid come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO CS9514.

Listed part numbers: FEL-PRO CS9514, MAHLE / CLEVITE CS54230 and AJUSA 54125000, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2004 Chrysler Intrepid, from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 1 other brand. MAHLE / CLEVITE MS2209A carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE MS2209A, MAHLE / CLEVITE MS2209P and KING ENGINE BEARINGS MB4074SI, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts are listed for the 2004 Chrysler Intrepid, from WJB / INMOTION PARTS, FEL-PRO, NATIONAL and 5 other brands. FEL-PRO TCS46164 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 2004 Chrysler Intrepid come from 5 brands — FEL-PRO, AJUSA, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO ES72897.

Part numbers include FEL-PRO ES72897, AJUSA 81050600 and MAHLE / CLEVITE GS33366, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 2004 Chrysler Intrepid come from 5 brands — FEL-PRO, AJUSA, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO 9514PT.

Listed part numbers: FEL-PRO 9514PT, FEL-PRO 9517PT and AJUSA 10150100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts for the 2004 Chrysler Intrepid come from 8 brands — FEL-PRO, SKP, AJUSA and 5 other brands. The "Popular" part is FEL-PRO HS9514PT1.

Part numbers include FEL-PRO HS9514PT1, SKP SKHS9514PT1 and AJUSA 52208000, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2004 Chrysler Intrepid.

Listed part numbers: MOPAR 4556020AB and MOPAR 4792279.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2004 Chrysler Intrepid come from SBI.

Listed part numbers: SBI 2302126L and SBI 2302126R.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

3 Cylinder Repair Sleeve parts for the 2004 Chrysler Intrepid come from MELLING.

Part numbers include MELLING CSL804, MELLING CSL860 and MELLING CSL904.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2004 Chrysler Intrepid — MOPAR 4609325.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2004 Chrysler Intrepid come from 5 brands — FEL-PRO, AJUSA, ENGINE PRO and 2 other brands. The "Popular" part is FEL-PRO 2601867.

This group includes FEL-PRO 2601867, AJUSA 50223200 and ENGINE PRO 305070 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 2004 Chrysler Intrepid, from MELLING, QUALCAST, SBI and 2 other brands. MELLING V1921 carries the "Popular" badge.

Part numbers include MELLING V1921, QUALCAST 101921 and SBI 01921, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Expansion Plug parts for the 2004 Chrysler Intrepid come from 3 brands — MELLING, QUALCAST and TOPLINE. The "Popular" part is MELLING MPE830R.

This group includes MELLING MPE830R, MELLING MPE835R and QUALCAST 97164 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2004 Chrysler Intrepid — MOPAR 4792379AN.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2004 Chrysler Intrepid come from 5 brands — FEL-PRO, AJUSA, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS91473.

Part numbers include FEL-PRO MS91473, AJUSA 13183700 and MAHLE / CLEVITE MS16211, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2004 Chrysler Intrepid, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 13183800, FEL-PRO MS91476 and MAHLE / CLEVITE MS16212, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2004 Chrysler Intrepid, from MELLING, MOPAR, QUALCAST and 2 other brands. MELLING V1920 carries the "Popular" badge.

Listed part numbers: MELLING V1920, MOPAR 4663899 and QUALCAST 101920, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts are listed for the 2004 Chrysler Intrepid, from WESTAR, ANCHOR and DEA / MARMON RIDE CONTROL. ANCHOR 2903 carries the "Popular" badge.

Part numbers include ANCHOR 2903, DEA / MARMON RIDE CONTROL A2903 and ANCHOR 2942, among others listed above.

This table covers the isolators in an engine mount. Read more

3 Motor Mount Isolator parts for the 2004 Chrysler Intrepid come from MOPAR.

This group includes MOPAR 4593184, MOPAR 4593184AB and MOPAR 4593285.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

19 Oil parts are listed for the 2004 Chrysler Intrepid, from MOBIL and VALVOLINE. MOBIL 125195 carries the "Popular" badge.

In the Conventional grade, VALVOLINE supplies 2 parts: grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 797578.

In the Full Synthetic grade, MOBIL and VALVOLINE supply 7 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 8 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 125201 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 2 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2004 Chrysler Intrepid come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2004 Chrysler Intrepid, from DORMAN, AGS, MOPAR and 1 other brand. AGS ODP00007 carries the "Popular" badge.

Listed part numbers: AGS ODP00007, DORMAN 090053 and DORMAN 090115, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO 72907.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2004 Chrysler Intrepid, from MOTORAD, CALORSTAT, GATES and 2 other brands. MOTORAD MO99 carries the "Popular" badge.

Part numbers include MOTORAD MO99, CALORSTAT OC2314 and GATES 31103, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

19 Oil Filter parts are listed for the 2004 Chrysler Intrepid, from BOSCH, VARIOUS MFR, WIX and 13 other brands. WIX 51085XP carries the "Popular" badge.

In the Economy grade, BOSCH, ECOGARD, FVP and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72137WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51085XP.

The Standard Replacement section lists 11 options from FRAM, MOTORCRAFT, WIX and 8 other brands — built to original-equipment specification. FRAM PH16 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2004 Chrysler Intrepid come from 2 brands — DORMAN and SPECTRA PREMIUM.

Part numbers include DORMAN 264066 and SPECTRA PREMIUM CRP60A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2004 Chrysler Intrepid, from FEL-PRO, AJUSA, MAHLE / CLEVITE and 2 other brands. FEL-PRO OS30689R carries the "Popular" badge.

This group includes FEL-PRO OS30689R, AJUSA 14096600 and MAHLE / CLEVITE OS32156 and the remaining parts above.

This table covers the Oil Pressure Relief valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2004 Chrysler Intrepid — MOPAR 2843208.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts are listed for the 2004 Chrysler Intrepid, from SKP, MELLING, MOPAR and 2 other brands. MELLING M296 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKOM296.

The Standard Replacement section: 4 options from MELLING, MOPAR, SEALED POWER and 1 other brand. MELLING M296 is listed in this group.

Part numbers include MELLING M296, SKP SKOM296 and MOPAR 4663745AC, among others listed above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MOPAR 4659945.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 2004 Chrysler Intrepid come from 3 brands — SILV-O-LITE, SEALED POWER and TOPLINE.

In the Premium grade, SILV-O-LITE and SEALED POWER supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER H862CP.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAC31.

This group includes SEALED POWER H862CP, SILV-O-LITE 3235HC and SILV-O-LITE S3235HC and the remaining parts above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2004 Chrysler Intrepid, from MAHLE / CLEVITE and TOPLINE.

This group includes MAHLE / CLEVITE 2233654 and TOPLINE PBTO33.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2004 Chrysler Intrepid come from 4 brands — HASTINGS MANUFACTURING, MAHLE / CLEVITE, SEALED POWER and 1 other brand. The "Popular" part is HASTINGS MANUFACTURING 2M4946.

Premium: 4 parts, from HASTINGS MANUFACTURING, MAHLE / CLEVITE and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 2M4946.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE RSC31.

Part numbers include HASTINGS MANUFACTURING 2M4946, HASTINGS MANUFACTURING 2M4946S and MAHLE / CLEVITE 41855CP, among others listed above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

3 Rocker Arm parts are listed for the 2004 Chrysler Intrepid, from MELLING, QUALCAST and SBI.

Part numbers include MELLING MR703, QUALCAST 402703 and SBI 1801322.

This table covers the Short blocks. Read more

This group shows a single part: MOPAR 5018727AC.

This table covers the Thrust washers. Read more

One part is listed for the 2004 Chrysler Intrepid — MAHLE / CLEVITE TW606S.

This table covers the Timing Cam sprockets. Read more

6 Timing Cam Sprocket parts are listed for the 2004 Chrysler Intrepid, from CLOYES, FVP and MELLING. CLOYES S840 carries the "Popular" badge.

This group includes CLOYES S840 and CLOYES S862 and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2004 Chrysler Intrepid come from 3 brands — MELLING, CLOYES and MOPAR. The "Popular" part is MELLING 193.

Part numbers include MELLING 193, CLOYES C193A and CLOYES C397, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

7 Timing Chain & Component Kit parts are listed for the 2004 Chrysler Intrepid, from MELLING, CLOYES, SKP and 1 other brand. CLOYES 90397SX carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SK90397SA.

The Standard Replacement section: 6 options from MELLING, CLOYES and TOPLINE. CLOYES 90397SX is listed in this group.

This group includes CLOYES 90397SX, SKP SK90397SA and CLOYES 90397SA and the remaining parts above.

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 4792005AC.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts for the 2004 Chrysler Intrepid come from 2 brands — MELLING and CLOYES. The "Popular" part is MELLING BG424.

Listed part numbers: MELLING BG424, MELLING BG425 and CLOYES 95401, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts are listed for the 2004 Chrysler Intrepid, from MELLING, CLOYES and MOPAR. MELLING BT427 carries the "Popular" badge.

Part numbers include MELLING BT427, MELLING BT507 and CLOYES 95404, among others listed above.

This table covers the Timing Chain Tensioner pistons. Read more

This group shows a single part: INA ZT0023.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Timing Cover Gasket parts are listed for the 2004 Chrysler Intrepid, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO TCS45035, MAHLE / CLEVITE T31531 and MAHLE / CLEVITE JV5150 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 2004 Chrysler Intrepid, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 16224 and VICTOR REINZ 711347900.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Timing Cover Repair Sleeve Tool parts are listed for the 2004 Chrysler Intrepid, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 16325 and VICTOR REINZ 711646700.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2004 Chrysler Intrepid — MAHLE / CLEVITE JV5000.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2004 Chrysler Intrepid, from CLOYES, FVP and MELLING.

Listed part numbers: CLOYES S839, plus the other parts above.

This table covers the adjusters that set valve lash. Read more

One part is listed for the 2004 Chrysler Intrepid — MOPAR 4663985.

This table covers the Valve covers. Read more

2 Valve Cover parts for the 2004 Chrysler Intrepid come from MOPAR.

Listed part numbers: MOPAR 4663703AE and MOPAR 4663704AD.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 2004 Chrysler Intrepid, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO VS50520R carries the "Popular" badge.

Listed part numbers: FEL-PRO VS50520R, MAHLE / CLEVITE VS50246 and AJUSA 56032500, plus the other parts above.

This table covers the Valve Cover grommets. Read more

3 Valve Cover Grommet parts are listed for the 2004 Chrysler Intrepid, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO ES71105, MAHLE / CLEVITE GS33418 and VICTOR REINZ 151013901.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts are listed for the 2004 Chrysler Intrepid, from QUALCAST, SBI and TOPLINE.

This group includes QUALCAST 303019, SBI 1403019 and TOPLINE VGC31.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

5 Valve Lifter parts are listed for the 2004 Chrysler Intrepid, from MELLING, QUALCAST, SBI and 2 other brands. MELLING JB171 carries the "Popular" badge.

Listed part numbers: MELLING JB171, QUALCAST 362297 and SBI VL171, plus the other parts above.