2009 Chrysler PT Cruiser Engine Parts

This table covers the chains that drive the balance shafts. Read more

6 Balance Shaft Chain parts are listed for the 2009 Chrysler PT Cruiser, from CLOYES, PREFERRED COMPONENTS INC, MELLING and 1 other brand. CLOYES 94191 carries the "Popular" badge.

The Chain Only section lists 4 options from CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. CLOYES 94191 is listed in this group.

In the Kit grade, CLOYES and PREFERRED COMPONENTS INC supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is CLOYES 94191SA.

Listed part numbers: CLOYES 94191, MELLING 201 and PREFERRED COMPONENTS INC C4150, plus the other parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2009 Chrysler PT Cruiser, from MELLING, CLOYES, FVP and 2 other brands. MELLING BG297 carries the "Popular" badge.

This group includes MELLING BG297 and CLOYES 95297 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Balance Shaft Chain Tensioner parts for the 2009 Chrysler PT Cruiser come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC.

Part numbers include CLOYES 95298 and PREFERRED COMPONENTS INC T65298A, among others listed above.

This table covers the Balance Shaft sprockets. Read more

3 Balance Shaft Sprocket parts are listed for the 2009 Chrysler PT Cruiser, from CLOYES, FVP and PREFERRED COMPONENTS INC.

Part numbers include CLOYES S642 and PREFERRED COMPONENTS INC G55642, among others listed above.

This table covers the camshafts that open the valves. Read more

4 Camshaft parts are listed for the 2009 Chrysler PT Cruiser, from MOPAR and SKP.

Part numbers include MOPAR 4781679AB, MOPAR 4781681AB and SKP SKES0353, among others listed above.

This table covers the Camshaft Dowel pins. Read more

One part is listed for the 2009 Chrysler PT Cruiser — MOPAR 6100997.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts are listed for the 2009 Chrysler PT Cruiser, from MAHLE / CLEVITE and MOPAR.

Part numbers include MAHLE / CLEVITE B32890 and MOPAR 4667731.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 2009 Chrysler PT Cruiser come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99139.

This group includes NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts for the 2009 Chrysler PT Cruiser come from 14 brands — VICTOR REINZ, FEL-PRO, NATIONAL and 11 other brands. The "Popular" part is FEL-PRO TCS45961.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Circular / Semi-Circular Plug parts for the 2009 Chrysler PT Cruiser come from 3 brands — APEX, FEL-PRO and VICTOR REINZ.

Part numbers include APEX ACP204, FEL-PRO ES72357 and VICTOR REINZ 711382500.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 2009 Chrysler PT Cruiser, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. ENGINETECH BB308J carries the "Popular" badge.

In the High Performance grade, MAHLE / CLEVITE supplies 1 part: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1813H.

The Standard Replacement section lists 9 options from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand — built to original-equipment specification. ENGINETECH BB308J is listed in this group.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6508364AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts are listed for the 2009 Chrysler PT Cruiser, from ELRING, ENGINETECH, ULTRA-POWER and 5 other brands. ENGINETECH CR148CSC carries the "Popular" badge.

Listed part numbers: ENGINETECH CR148CSC, ULTRA-POWER CS26202 and AJUSA 54154800, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 2009 Chrysler PT Cruiser come from 4 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BC410J.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5270XP is listed in this group.

Standard Replacement: 5 parts, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. A representative part number is ENGINETECH BC410J.

This group includes ENGINETECH BC410J, KING ENGINE BEARINGS MB5270XP and MAHLE / CLEVITE MS2279A and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2009 Chrysler PT Cruiser come from 5 brands — NATIONAL, MAHLE / CLEVITE, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99128.

Part numbers include NATIONAL 99128, MAHLE / CLEVITE A358 and SCHAEFFLER SR3467, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

29 Crankshaft Seal parts for the 2009 Chrysler PT Cruiser come from 14 brands — ELRING, VICTOR REINZ, FEL-PRO and 11 other brands. The "Popular" part is ELRING 424841. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the cylinder heads that close the top of the block. Read more

2 Cylinder Head parts for the 2009 Chrysler PT Cruiser come from 2 brands — ENGINETECH and MOPAR.

Part numbers include ENGINETECH CH1078R and MOPAR R8249421AA.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2009 Chrysler PT Cruiser, from ELRING, ENGINETECH, FEL-PRO and 5 other brands. ENGINETECH HB195 carries the "Popular" badge.

Listed part numbers: ENGINETECH HB195, FEL-PRO ES71028 and AJUSA 81028400, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts are listed for the 2009 Chrysler PT Cruiser, from ELRING, ENGINETECH, FEL-PRO and 5 other brands. ENGINETECH HCR24B carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Cylinder Head Gasket Set parts are listed for the 2009 Chrysler PT Cruiser, from ELRING, ENGINETECH, FEL-PRO and 6 other brands. ENGINETECH CR148HSF carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 4556020AB.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2009 Chrysler PT Cruiser — SBI 2302120.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 2009 Chrysler PT Cruiser.

Part numbers include MELLING CSL1146 and MELLING CSL2246.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts for the 2009 Chrysler PT Cruiser come from 2 brands — KAT'S HEATERS and MOPAR.

This group includes KAT'S HEATERS 11812, KAT'S HEATERS 28812 and MOPAR 5033157AB.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2009 Chrysler PT Cruiser, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH CR148K14 carries the "Popular" badge.

This group includes ENGINETECH CR148K14, AJUSA 50311900 and APEX AFS2078 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2009 Chrysler PT Cruiser come from 5 brands — QUALCAST, ENGINETECH, MELLING and 2 other brands. The "Popular" part is ENGINETECH V4405.

Part numbers include ENGINETECH V4405, MELLING V2009 and QUALCAST 102009, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Expansion Plug parts are listed for the 2009 Chrysler PT Cruiser, from QUALCAST and TOPLINE.

Listed part numbers: QUALCAST 97167, QUALCAST 97167B and TOPLINE EPSC26.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2009 Chrysler PT Cruiser, from ATP, DORMAN, MOPAR and 1 other brand.

This group includes ATP 102160, DORMAN 594185 and MOPAR 4777618AG and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: MOPAR 4884520AB.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2009 Chrysler PT Cruiser, from ELRING, FEL-PRO, MAHLE / CLEVITE and 4 other brands. FEL-PRO MS96198 carries the "Popular" badge.

Part numbers include FEL-PRO MS96198, MAHLE / CLEVITE MS19479 and AJUSA 13238900, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2009 Chrysler PT Cruiser come from 2 brands — AJUSA and VICTOR REINZ.

Listed part numbers: AJUSA 01265100 and VICTOR REINZ 151033001.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2009 Chrysler PT Cruiser come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V2008.

Listed part numbers: MELLING V2008, ENGINETECH V4402 and QUALCAST 102008, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

11 Motor Mount parts for the 2009 Chrysler PT Cruiser come from 6 brands — DEA / MARMON RIDE CONTROL, WESTAR, PIONEER and 3 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A2948.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM2947 is listed in this group.

Standard Replacement: 10 parts, from DEA / MARMON RIDE CONTROL, WESTAR, PIONEER and 2 other brands. A representative part number is DEA / MARMON RIDE CONTROL A2948.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 5274500AB.

This table covers the Motor Mount kits. Read more

This group shows a single part: WESTAR ETK002.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

29 Oil parts for the 2009 Chrysler PT Cruiser come from 6 brands — VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. The "Popular" part is LIQUI MOLY 20228. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 18 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOPAR 4884242AD.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Chrysler PT Cruiser — ELRING 633540.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2009 Chrysler PT Cruiser.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

3 Oil Dipstick / Tube parts for the 2009 Chrysler PT Cruiser come from 2 brands — MOPAR and DORMAN.

Listed part numbers: DORMAN 917304, MOPAR 4777965AA and MOPAR 4777964AB.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2009 Chrysler PT Cruiser come from 5 brands — DORMAN, AGS, ELRING and 2 other brands. The "Popular" part is AGS ODP00007.

This group includes AGS ODP00007, DORMAN 090053 and DORMAN 090115 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2009 Chrysler PT Cruiser, from AJUSA and ELRING.

Listed part numbers: AJUSA 21017400 and ELRING 115100.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2009 Chrysler PT Cruiser come from 5 brands — GATES, CALORSTAT, MOPAR and 2 other brands. The "Popular" part is GATES 31118.

This group includes GATES 31118, CALORSTAT OC2317 and MOPAR 53010656AA and the remaining parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Chrysler PT Cruiser — ELRING 485930.