2011 Chrysler 200 Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

18 Coolant / Antifreeze parts for the 2011 Chrysler 200 come from 7 brands — PRESTONE, PEAK, VALVOLINE and 4 other brands. The "Popular" part is FVP MV5050GAL. 15 parts fit every engine; the other 3 are engine-specific.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PEAK, PRESTONE and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE ZXG051.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, PRESTONE, ACDELCO, AISIN and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is ACDELCO 105027.

This table covers the bleeders used to purge air from the coolant circuit. Read more

4 Coolant Air Bleeder parts are listed for the 2011 Chrysler 200, from DORMAN and SKP.

This group includes DORMAN 902404, DORMAN 902404HP and SKP SK902404 and the remaining parts above.

This table covers the Coolant filler necks. Read more

One part is listed for the 2011 Chrysler 200 — FOUR SEASONS 85324.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Coolant Hose / Pipe Seal parts are listed for the 2011 Chrysler 200, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO ES72872 carries the "Popular" badge.

Part numbers include FEL-PRO ES72872, AJUSA 16060600 and APEX AWP3203, among others listed above.

This table covers the seals at the Coolant Hose Connector / Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Chrysler 200 — ELRING 568900.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

10 Coolant Reservoir parts are listed for the 2011 Chrysler 200, from TECHPRO, DORMAN, GPD and 2 other brands. DORMAN 603379 carries the "Popular" badge.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

6 Coolant Reservoir Cap parts are listed for the 2011 Chrysler 200, from MOTORAD, DORMAN and MOPAR.

The Locking Replacement section lists 1 option from MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. MOTORAD ST16 is listed in this group.

The Standard Replacement section: 1 option from MOTORAD. MOTORAD T16 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes MOTORAD ST16, MOTORAD T16 and DORMAN 54201 and the remaining parts above.

This table covers the Cooling Fan control modules. Read more

US MOTOR WORKS supplies the 3 Cooling Fan Control Module parts for the 2011 Chrysler 200. All of them fit every engine offered in the 2011 200.

Part numbers include US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2011 Chrysler 200 come from 3 brands — ACDELCO, GATES and MOTORAD. Every part fits both the 2.4L L4 and the 3.6L V6.

This group includes ACDELCO 12A01, GATES 31413 and MOTORAD 3003.

This table covers the Hose clamps. Read more

4 Hose Clamp parts for the 2011 Chrysler 200 come from MOPAR.

Part numbers include MOPAR 68042060AA, MOPAR 6508369AA and MOPAR 6510112AA, among others listed above.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

13 Radiator parts for the 2011 Chrysler 200 come from 13 brands — FAMOUS BRAND, GPD, CSF and 10 other brands. The "Popular" part is CSF 3415. 12 parts fit every engine; the other 1 is engine-specific.

The Economy section: 2 options from FAMOUS BRAND and GPD. FAMOUS BRAND 438144 is listed in this group.

Standard Replacement: 11 parts, from CSF, SPECTRA PREMIUM, TYC and 8 other brands. A representative part number is CSF 3415.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

12 Radiator Cap parts for the 2011 Chrysler 200 come from 5 brands — SKP, GATES, MOTORAD and 2 other brands. The "Popular" part is GATES 31528. 5 parts fit every engine; the other 7 are engine-specific.

Locking Replacement: 3 parts, from GATES, MOTORAD and SKP. A representative part number is GATES 31518.

Standard Replacement: 9 parts, from SKP, CALORSTAT, MOPAR and 2 other brands. A representative part number is GATES 31528.

This table covers the petcocks used to drain the radiator. Read more

2 Radiator Drain Petcock parts are listed for the 2011 Chrysler 200, from DORMAN and MOPAR. All of them fit every engine offered in the 2011 200.

Part numbers include DORMAN 61134 and MOPAR 52028466AB.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts are listed for the 2011 Chrysler 200, from DORMAN, GPD, FOUR SEASONS and 3 other brands. DORMAN 621029 carries the "Popular" badge. All of them fit every engine offered in the 2011 200.

Economy: 2 parts, from DORMAN and GPD. A representative part number is DORMAN 621029.

The Standard Replacement section: 4 options from FOUR SEASONS, TYC, UAC and 1 other brand. FOUR SEASONS 76103 is listed in this group.

This group includes DORMAN 621029, GPD 2811608 and FOUR SEASONS 76103 and the remaining parts above.

This table covers the Radiator Fan blades. Typical signs include chatter, streaks, or a skip at the top of the stroke. Confirm left and right lengths in the notes — they are often different. Read more

One part is listed for the 2011 Chrysler 200 — MOPAR 68031871AA.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

This group shows a single part: VEMO V33010024.

This table covers the shrouds that duct air through the fan and radiator. Read more

This group shows a single part: MOPAR 68031872AA.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

21 Radiator Hose parts are listed for the 2011 Chrysler 200, from GATES, CONTINENTAL, DAYCO and 2 other brands. ACDELCO 26668X carries the "Popular" badge.

This table covers the harness connectors at the Radiator Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CONTINENTAL 65652.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2011 Chrysler 200 — MOPAR 68020480AA.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

26 Temperature Sender / Sensor parts for the 2011 Chrysler 200 come from 14 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, GPD and 11 other brands. The "Popular" part is DELPHI TS10546. They are grouped as Economy, Full Service Kit and Standard Replacement, with Standard Replacement the largest group at 14 parts from DELPHI, NTK, STANDARD MOTOR PRODUCTS and 5 other brands.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

26 Thermostat parts are listed for the 2011 Chrysler 200, from MOTORAD, CALORSTAT, GATES and 7 other brands. DORMAN 9023036 carries the "Popular" badge. Economy, Heavy Duty, Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 16 parts.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2011 Chrysler 200 come from 6 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is FEL-PRO 35826.

This table covers the housings and outlets the thermostat sits in. Read more

17 Thermostat Housing / Water Outlet parts are listed for the 2011 Chrysler 200, from DORMAN, MOTORAD, ULTRA-POWER and 5 other brands. DORMAN 902316 carries the "Popular" badge.

Economy: 8 parts, from DORMAN, ULTRA-POWER and SKP. A representative part number is DORMAN 902316.

The Standard Replacement section: 9 options from MOTORAD, FOUR SEASONS, AUTOTECNICA and 2 other brands. MOTORAD 724203 is listed in this group.

This table covers the gaskets that seal the Water Inlet. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Water Inlet Gasket parts for the 2011 Chrysler 200 come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 01113800, FEL-PRO ES72872 and MAHLE / CLEVITE C32200, among others listed above.