2017 Chrysler 300 Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

23 Alternator / Generator parts are listed for the 2017 Chrysler 300, from REMY, TERREPOWER, MOPAR and 8 other brands. MOPAR 4801779AG carries the "Popular" badge.

In the New grade, MOPAR, WAI GLOBAL, REMY and 3 other brands supply 10 parts: brand-new units rather than rebuilt ones. A representative part number is MOPAR 4801779AG.

In the Remanufactured grade, ACDELCO, BOSCH, FVP and 4 other brands supply 13 parts: factory-rebuilt units with new wear components. A representative part number is DENSO 2101226.

This table covers the rectifier diode packs in the alternator. Read more

One part is listed for the 2017 Chrysler 300 — BOSCH 1986AE0614.

This table covers the pulleys on the alternator shaft. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

6 Alternator / Generator Pulley parts for the 2017 Chrysler 300 come from 3 brands — LITENS, CONTINENTAL and DORMAN. The "Popular" part is LITENS 920972A.

This group includes LITENS 920972A, LITENS 920971A and CONTINENTAL 49941 and the remaining parts above.

This table covers the Alternator rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness. Read more

One part is listed for the 2017 Chrysler 300 — BOSCH 1986AE0665.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

8 Battery parts for the 2017 Chrysler 300 come from 8 brands — DEKA, FVP, ACDELCO and 5 other brands. The "Popular" part is DEKA 9A94R.

In the AGM (Extended Life) grade, DEKA, FVP, ACDELCO and 4 other brands supply 7 parts: grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. A representative part number is DEKA 9A94R.

In the Performance AGM (Extended Life + Increased Power) grade, FULLRIVER supplies 1 part: grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. A representative part number is FULLRIVER FT85094R.

Listed part numbers: DEKA 9A94R, FVP P94RAGM and ACDELCO 94RAGM, plus the other parts above.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

MOPAR supplies the 3 Battery Cable parts for the 2017 Chrysler 300.

This group includes MOPAR 5059001AC, MOPAR 68207018AE and MOPAR 68306895AA.

This table covers the Battery Current sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Battery Current Sensor parts are listed for the 2017 Chrysler 300, from MOPAR and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOPAR 56029777AC and STANDARD MOTOR PRODUCTS BSC17.

This table covers the covers that protect battery terminals. Read more

This group shows a single part: MOPAR 4606858AA.

This table covers the trays the battery sits in. Read more

2 Battery Tray parts for the 2017 Chrysler 300 come from 2 brands — DORMAN and MOPAR.

Part numbers include DORMAN 00079 and MOPAR 5065355AK.

This table covers the Battery Vent tubes. Read more

One part is listed for the 2017 Chrysler 300 — MOPAR 4608914AA.

This table covers the Blind Spot Detection sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Blind Spot Detection Sensor parts are listed for the 2017 Chrysler 300, from MOPAR, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: MOPAR 68303026AA, STANDARD MOTOR PRODUCTS BSD44 and WELLS 5S16697.

This table covers the body-control modules that run lighting, locks and wipers. Read more

One part is listed for the 2017 Chrysler 300 — MOPAR 68309506AB.

This table covers the resettable circuit breakers in this vehicle's electrical system. Read more

This group shows a single part: BUSSMANN CB22125.

This table covers the Door control modules. Read more

4 Door Control Module parts for the 2017 Chrysler 300 come from MOPAR.

Part numbers include MOPAR 68316560AD, MOPAR 68316559AD and MOPAR 68316561AD, among others listed above.

This table covers the brackets that mount the Engine Control Module (ECM Computer). Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2017 Chrysler 300 — MOPAR 5187982AF.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

16 Fuse parts for the 2017 Chrysler 300 come from 2 brands — BUSSMANN and MOPAR. The "Popular" part is BUSSMANN ATM10LP.

In the 10 Amp grade, BUSSMANN and MOPAR supply 2 parts: grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM10LP.

The 15 Amp section lists 2 options from BUSSMANN and MOPAR — grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM15LP is listed in this group.

The 20 Amp section lists 3 options from BUSSMANN and MOPAR — grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM20LP is listed in this group.

In the 25 Amp grade, BUSSMANN supplies 1 part: grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM25LP.

In the 30 Amp grade, BUSSMANN supplies 2 parts: grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FMX30.

The 40 Amp section lists 3 options from BUSSMANN and MOPAR — grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX40 is listed in this group.

In the 5 Amp grade, BUSSMANN supplies 1 part: grouped under the catalog's "5 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM5LP.

In the 50 Amp grade, BUSSMANN supplies 1 part: grouped under the catalog's "50 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FMX50.

The 60 Amp section lists 1 option from BUSSMANN — grouped under the catalog's "60 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX60 is listed in this group.