12 Ignition parts are listed for the 1933 Continental Beacon, in 6 part types, covering the 4cyl engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1933 Continental Beacon, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (5 parts), Condenser / Capacitor (2 parts) and Spark Plug (2 parts). The other 3 part types cover the remaining 3 parts.
The 1933 Continental Beacon came with a single engine, the 4cyl, and every part is verified against it.
7 brands supply ignition parts for the 1933 Continental Beacon, led by STANDARD MOTOR PRODUCTS (5 parts), CHAMPION (2 parts) and ACDELCO (1 part), plus 4 more brands. Quality grades include Economy, Premium and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1933 Continental Beacon. 1 part has it: STANDARD MOTOR PRODUCTS UC14T (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | U210 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| STANDARD MOTOR PRODUCTS | AL63 | 🇺🇸 US | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts for the 1933 Continental Beacon come from 2 brands — ACDELCO and STANDARD MOTOR PRODUCTS.
This group includes ACDELCO U210 and STANDARD MOTOR PRODUCTS AL63.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LILAND GLOBAL | AL65LG | 🇺🇸 US | Black Brass | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
One part is listed for the 1933 Continental Beacon — LILAND GLOBAL AL65LG.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | AL64 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
One part is listed for the 1933 Continental Beacon — STANDARD MOTOR PRODUCTS AL64.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC14T | 🇺🇸 US | T-Series6 Volt | View on Amazon |
| FVP | UC14F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN | 2IGC0057 | 🇺🇸 US | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UC14 | 🇺🇸 US | Blue Streak6 Volt | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS | C14 | 🇺🇸 US | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
5 Ignition Coil parts for the 1933 Continental Beacon come from 4 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS UC14T.
The Economy section lists 3 options from STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN — the catalog's value-priced group. STANDARD MOTOR PRODUCTS UC14T is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS UC14.
In the Standard Replacement grade, UNITED MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is UNITED MOTOR PRODUCTS C14.
Listed part numbers: STANDARD MOTOR PRODUCTS UC14T, FVP UC14F and HOLSTEIN 2IGC0057, plus the other parts above.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
One part is listed for the 1933 Continental Beacon — STANDARD MOTOR PRODUCTS CB6.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 514 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 541 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
CHAMPION supplies both parts for the 1933 Continental Beacon.
Part numbers include CHAMPION 514 and CHAMPION 541.
Buying Ignition Parts for a 1933 Continental Beacon
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 4cyl engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Condenser / Capacitor .
Frequently Asked Questions
How many ignition parts fit the 1933 Continental Beacon?
Our catalog currently lists 12 ignition parts for the 1933 Continental Beacon across 6 subcategories and 7 brands, covering the 4cyl engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1933 Continental Beacon?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1933 Continental Beacon?
Notes on this page include a 0.025" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1933 Continental Beacon was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1933 Continental Beacon?
Every part on this page is matched to the 4cyl engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1933 Continental Beacon
Ignition Parts for Other Continental Beacon Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.