1952 Crosley Super Ignition Parts

Engine:
0.7L 44cid L4

The 1952 Crosley Super has 16 ignition parts with verified fitment on this page — 5 part types and 8 brands, covering the 0.7L 44cid L4 engine. Each part includes a manufacturer part number and application notes.

The ignition system on the 1952 Crosley Super delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (6 parts), Spark Plug (4 parts) and Condenser / Capacitor (2 parts). The other 2 part types cover the remaining 4 parts.

Condenser / Capacitor

Brand Part Number Markets Notes Buy
ACDELCO U210
🇺🇸 US 🇨🇦 CA
Gold
View on
Amazon
STANDARD MOTOR PRODUCTS AL63
🇺🇸 US
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Premium

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL25LG
🇺🇸 US
Black Brass
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL25
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL102LG
🇺🇸 US
PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS AL102
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
HOLSTEIN 2IGC0057
🇺🇸 US
View on
Amazon
SPECTRA PREMIUM C660
🇺🇸 US
Pack
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS C14
🇺🇸 US
View on
Amazon
WELLS 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Brand Part Number Markets Notes Buy
ACDELCO R45
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R45
ProfessionalConventionalPre-Set Gap: 0.040"
Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION 511
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 511
Copper PlusPre-Set Gap: 0.03"
Non-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 592
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 592
Copper PlusPre-Set Gap: 0.03"
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 592C
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 592C
Copper Plus
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1952 Crosley Super

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 0.7L 44cid L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1952 Crosley Super?

Our catalog currently lists 16 ignition parts for the 1952 Crosley Super across 5 subcategories and 8 brands, covering the 0.7L 44cid L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1952 Crosley Super?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1952 Crosley Super?

Notes on this page include pre-set gaps of 0.025", 0.03" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1952 Crosley Super was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1952 Crosley Super?

Every part on this page is matched to the 0.7L 44cid L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1952 Crosley Super

Ignition Parts for Other Crosley Super Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.