4 Automatic transmission parts are listed for the 2020 Cupra Leon, in 4 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The automatic transmission on the 2020 Cupra Leon covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts. The largest groups are Filter (1 part), Fluid Pump O-Ring (1 part) and Fluid Pump Seal (1 part). The other 1 part type covers the remaining 1 part.
Every part on this page is matched to the 2.0L L4 Turbocharged — the only engine offered in the 2020 Cupra Leon.
Every automatic transmission part listed for the 2020 Cupra Leon comes from ELRING.
Each part number listed for the 2020 Cupra Leon opens a page with every vehicle that part fits.
Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 097370 | 🇲🇽 MX | Trans Code. DQ250 | View on Amazon |
This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
This group shows a single part: ELRING 097370.
Fluid Pump O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 886680 | 🇲🇽 MX | View on Amazon |
This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: ELRING 886680.
Fluid Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 149060 | 🇲🇽 MX | View on Amazon |
This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2020 Cupra Leon — ELRING 149060.
Input Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 966570 | 🇲🇽 MX | Transmission Input Shaftwith Trans.: DQ250,02E | View on Amazon |
This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2020 Cupra Leon — ELRING 966570.
Buying Automatic Transmission Parts for a 2020 Cupra Leon
On this vehicle, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Filter and Fluid Pump O-Ring .
Frequently Asked Questions
How many automatic transmission parts fit the 2020 Cupra Leon?
Our catalog currently lists 4 automatic transmission parts for the 2020 Cupra Leon across 4 subcategories and 1 brand, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of automatic transmission problems on a 2020 Cupra Leon?
Common symptoms include delayed or harsh engagement, slipping under load, fluid that smells burnt, or shuddering at light throttle around 40 mph. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Cupra Leon was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Cupra Leon?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then use exactly the fluid specification in the notes — automatic transmissions are the least forgiving component on the vehicle about fluid choice. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Cupra Leon
Automatic Transmission Parts for Other Cupra Leon Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.