8 Suspension parts are listed for the 2022 Cupra Leon, in 3 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2022 Cupra Leon, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. All 8 listed parts are Sway Bar Link (4 parts), Control Arm (2 parts) and Control Arm Bushing (2 parts).
The 2022 Cupra Leon came with a single engine, the 2.0L L4 Turbocharged, and every part is verified against it.
2 brands supply suspension parts for the 2022 Cupra Leon, led by DORMAN (6 parts) and FVP (2 parts). Quality grades include Daily Driver and Economy.
Each part number listed for the 2022 Cupra Leon opens a page with every vehicle that part fits.
Control Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 524915 | 🇲🇽 MX | Rear LeftTrailing Arm | View on Amazon |
| DORMAN | 524916 | 🇲🇽 MX | Rear RightTrailing Arm | View on Amazon |
This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.
DORMAN supplies both parts for the 2022 Cupra Leon.
Listed part numbers: DORMAN 524915 and DORMAN 524916.
Control Arm Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 533694 | 🇲🇽 MX | Rear Upper Inner | View on Amazon |
| DORMAN | 533695 | 🇲🇽 MX | Rear Upper Outer | View on Amazon |
This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
DORMAN supplies both parts for the 2022 Cupra Leon.
Part numbers include DORMAN 533694 and DORMAN 533695.
Sway Bar Link
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 542032 | 🇲🇽 MX | Rear | View on Amazon |
| DORMAN | 542027 | 🇲🇽 MX | Front | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | SL43255 | 🇲🇽 MX | Front | View on Amazon |
| FVP | SL43575 | 🇲🇽 MX | Rear | View on Amazon |
This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it.
4 Sway Bar Link parts are listed for the 2022 Cupra Leon, from DORMAN and FVP.
The Daily Driver section lists 2 options from DORMAN — grouped for everyday commuting duty. DORMAN 542032 is listed in this group.
In the Economy grade, FVP supplies 2 parts: the catalog's value-priced group. A representative part number is FVP SL43255.
This group includes DORMAN 542032, DORMAN 542027 and FVP SL43255 and the remaining parts above.
Buying Suspension Parts for a 2022 Cupra Leon
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Sway Bar Link and Control Arm .
Frequently Asked Questions
How many suspension parts fit the 2022 Cupra Leon?
Our catalog currently lists 8 suspension parts for the 2022 Cupra Leon across 3 subcategories and 2 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2022 Cupra Leon?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 Cupra Leon was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 Cupra Leon?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 Cupra Leon
Suspension Parts for Other Cupra Leon Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.