1988 Daihatsu Charade Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1988 Daihatsu Charade — ITM ENGINE COMPONENTS 2C9215.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 1988 Daihatsu Charade, from SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3461, TIMKEN KWK99111 and WJB / INMOTION PARTS WS99111.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Camshaft Seal parts are listed for the 1988 Daihatsu Charade, from AUTO EXTRA, NATIONAL, WJB / INMOTION PARTS and 4 other brands. NATIONAL 712008 carries the "Popular" badge.

Listed part numbers: NATIONAL 712008, WJB / INMOTION PARTS WS712008 and AUTO EXTRA 10922, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ITM ENGINE COMPONENTS 3B1000.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 1988 Daihatsu Charade come from AJUSA.

Part numbers include AJUSA 54110800 and AJUSA 54033400.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts are listed for the 1988 Daihatsu Charade, from BCA and WJB / INMOTION PARTS.

This group includes BCA NS99134 and WJB / INMOTION PARTS WS99134.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Crankshaft Seal parts are listed for the 1988 Daihatsu Charade, from NATIONAL, WJB / INMOTION PARTS, AJUSA and 5 other brands. NATIONAL 223420 carries the "Popular" badge.

Part numbers include NATIONAL 223420, WJB / INMOTION PARTS WS223420 and AJUSA 15012000, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 1988 Daihatsu Charade come from 6 brands — AJUSA, BECK/ARNLEY, OMNI 5 and 3 other brands. The "Popular" part is BECK/ARNLEY 0351875.

This group includes BECK/ARNLEY 0351875, OMNI 5 PWC40400 and AJUSA 10078100 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts for the 1988 Daihatsu Charade come from 3 brands — AJUSA, ITM ENGINE COMPONENTS and VICTOR REINZ.

Listed part numbers: AJUSA 52106700, AJUSA 52106600 and ITM ENGINE COMPONENTS 0910400, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 1988 Daihatsu Charade come from 2 brands — AJUSA and ITM ENGINE COMPONENTS.

Listed part numbers: AJUSA 50172900, AJUSA 50120600 and ITM ENGINE COMPONENTS 0900400.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 1988 Daihatsu Charade, from BECK/ARNLEY and ITM ENGINE COMPONENTS.

This group includes BECK/ARNLEY 0221572 and ITM ENGINE COMPONENTS RX9414.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 1988 Daihatsu Charade come from 4 brands — AJUSA, ELRING, ITM ENGINE COMPONENTS and 1 other brand.

Part numbers include AJUSA 13063700, ELRING 526800 and ITM ENGINE COMPONENTS 0950400, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1988 Daihatsu Charade — AJUSA 00630900.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 1988 Daihatsu Charade, from BECK/ARNLEY and ITM ENGINE COMPONENTS.

This group includes BECK/ARNLEY 0221572 and ITM ENGINE COMPONENTS RV9428.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 1988 Daihatsu Charade — ANCHOR 8652.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

20 Oil parts are listed for the 1988 Daihatsu Charade, from MOBIL and VALVOLINE. MOBIL 125195 carries the "Popular" badge.

In the Conventional grade, VALVOLINE supplies 3 parts: grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 797578.

In the Full Synthetic grade, MOBIL and VALVOLINE supply 7 parts: full-synthetic oils. A representative part number is MOBIL 125195.

In the Heavy Duty / Diesel grade, MOBIL supplies 1 part: grouped under the catalog's "Heavy Duty / Diesel" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 122492.

The High Mileage (>75,000 Miles) section lists 7 options from VALVOLINE and MOBIL — oils grouped for high-mileage engines. MOBIL 125201 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 2 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts are listed for the 1988 Daihatsu Charade, from FRAM, VARIOUS MFR, WIX and 9 other brands. ACDELCO PF1233 carries the "Popular" badge.

In the Economy grade, FRAM, FVP, PRO-TEC and 1 other brand supply 5 parts: the catalog's value-priced group. A representative part number is FRAM FF4386.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1103A.

The Standard Replacement section lists 8 options from ACDELCO, DENSO, WIX and 5 other brands — built to original-equipment specification. ACDELCO PF1233 is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1988 Daihatsu Charade, from AJUSA and ITM ENGINE COMPONENTS.

This group includes AJUSA 14086000, AJUSA 14034700 and ITM ENGINE COMPONENTS 0990400.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: ITM ENGINE COMPONENTS 2318.

This table covers the Oil Pump Drive gears. Read more

2 Oil Pump Drive Gear parts for the 1988 Daihatsu Charade come from ITM ENGINE COMPONENTS.

Part numbers include ITM ENGINE COMPONENTS 50379 and ITM ENGINE COMPONENTS 50378.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts for the 1988 Daihatsu Charade come from 3 brands — INA, MELLING and S.A. GEAR.

This group includes INA ZSS696 and MELLING S696 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1988 Daihatsu Charade come from 2 brands — HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. The "Popular" part is HASTINGS MANUFACTURING 2C4459.

Part numbers include HASTINGS MANUFACTURING 2C4459, HASTINGS MANUFACTURING 2C4459S and HASTINGS MANUFACTURING 4459, among others listed above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 1988 Daihatsu Charade — ITM ENGINE COMPONENTS 0566132.

This table covers the Thrust washers. Read more

One part is listed for the 1988 Daihatsu Charade — ITM ENGINE COMPONENTS 1T4424.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

6 Timing Belt parts for the 1988 Daihatsu Charade come from 6 brands — CLOYES, ITM ENGINE COMPONENTS, GATES and 3 other brands. The "Popular" part is GATES T178.

The Economy section: 2 options from CLOYES and ITM ENGINE COMPONENTS. CLOYES B178 is listed in this group.

Standard Replacement: 4 parts, from GATES, BANDO, INA and 1 other brand. A representative part number is GATES T178.

Listed part numbers: GATES T178, CLOYES B178 and ITM ENGINE COMPONENTS 4233, plus the other parts above.

This table covers the Timing Belt & component kits. Read more

One part is listed for the 1988 Daihatsu Charade — GMB 24220178.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Belt Tensioner parts are listed for the 1988 Daihatsu Charade, from GMB, CLOYES, INA and 2 other brands. GMB 4224010 carries the "Popular" badge.

Part numbers include GMB 4224010, CLOYES 95269 and INA ZT95269, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1988 Daihatsu Charade — ITM ENGINE COMPONENTS 1501107.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA JTC11394.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 1988 Daihatsu Charade, from AJUSA, ELRING, ITM ENGINE COMPONENTS and 1 other brand.

Part numbers include AJUSA 56014300, ELRING 578428 and ITM ENGINE COMPONENTS 0930400, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

ITM ENGINE COMPONENTS supplies both parts for the 1988 Daihatsu Charade.

Part numbers include ITM ENGINE COMPONENTS VG1032CI and ITM ENGINE COMPONENTS VG1032BR.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 1988 Daihatsu Charade, from AJUSA, ELRING and ITM ENGINE COMPONENTS.

Listed part numbers: AJUSA 12010700, AJUSA 57017000 and ELRING 069550, plus the other parts above.