1982 Delorean DMC 12 Engine Parts

Engine:
2.9L V6

This page lists 30 engine parts for the 1982 Delorean DMC 12, across 5 part types, covering the 2.9L V6 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1982 Delorean DMC 12, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 28 parts of the 30 listed are Crankshaft Repair Sleeve (10 parts), Oil Filter (10 parts) and Crankshaft Seal (8 parts). The other 2 part types cover the remaining 2 parts.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Popular NS99315
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
WJB / INMOTION PARTS Popular WS99166
🇺🇸 US 🇨🇦 CA
Shaft Diameter Minimum (In): 1.647 In
Fitment notes — WJB / INMOTION PARTS WS99166
Shaft Diameter Minimum (In): 1.647 In
Front
View on
Amazon
BCA NS99166
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
NATIONAL 99166
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
NATIONAL 99315
🇺🇸 US 🇨🇦 CA
Rear0.827 IN Width
Fitment notes — NATIONAL 99315
Rear0.827 IN Width3.543 IN Outside Diameter
View on
Amazon
SCHAEFFLER SR3549
🇺🇸 US 🇨🇦 CA
Rear24 MM Width
Fitment notes — SCHAEFFLER SR3549
Rear24 MM Width89.99 mm Outside Diameter80.01 mm Inside Diameter
View on
Amazon
SKF 99313
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
TIMKEN KWK99169
🇺🇸 US 🇨🇦 CA
Kwik-Sleeve
Fitment notes — TIMKEN KWK99169
Kwik-Sleeve
Front
View on
Amazon
TIMKEN KWK99315
🇺🇸 US 🇨🇦 CA
Kwik-Sleeve
Fitment notes — TIMKEN KWK99315
Kwik-Sleeve
Rear
View on
Amazon
WJB / INMOTION PARTS WS99315
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular 228010
🇺🇸 US 🇨🇦 CA
Rear0.512 IN Width
Fitment notes — NATIONAL 228010
Rear0.512 IN Width3.951 IN Outside Diameter
View on
Amazon
SKF Popular 31511
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
BCA NS224252
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
SCHAEFFLER SS3346
🇺🇸 US 🇨🇦 CA
Sealing Material: Viton
Fitment notes — SCHAEFFLER SS3346
Sealing Material: Viton
Rear3.94" O.D. X 0.39" Width
View on
Amazon
TIMKEN 224252
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
TIMKEN 228010
🇺🇸 US 🇨🇦 CA
Helix Type: Counter Clockwise
Fitment notes — TIMKEN 228010
Helix Type: Counter Clockwise
Rear
View on
Amazon
WJB / INMOTION PARTS WS224252
🇺🇸 US 🇨🇦 CA
Material: Nitrile
Fitment notes — WJB / INMOTION PARTS WS224252
Material: Nitrile
Front
View on
Amazon
WJB / INMOTION PARTS WS228010
🇺🇸 US 🇨🇦 CA
Housing Bore: 3.9369999999999998 InMaterial: Polyacrylate
Fitment notes — WJB / INMOTION PARTS WS228010
Housing Bore: 3.9369999999999998 InMaterial: PolyacrylateRear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
BOSCH 72137WS
🇺🇸 US 🇨🇦 CA
Workshop Oil Filter
View on
Amazon
ECOGARD X18
🇺🇸 US 🇨🇦 CA
Conventional Media
Fitment notes — ECOGARD X18
Conventional Media
Note:
View on
Amazon
VARIOUS MFR PG4670
🇺🇸 US 🇨🇦 CA
Spin-On
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular PF53
🇺🇸 US 🇨🇦 CA
Gold / Professional or Gold / Professional DurapackSpin-On
View on
Amazon
WIX Popular 51307
🇺🇸 US 🇨🇦 CA
Spin-On Filter
View on
Amazon
BOSCH 3402
🇺🇸 US 🇨🇦 CA
Premium Oil Filter
View on
Amazon
HASTINGS / BALDWIN LF142
🇺🇸 US 🇨🇦 CA
View on
Amazon
HENGST H10W22
🇺🇸 US 🇨🇦 CA
Spin-On
View on
Amazon
MAHLE / CLEVITE OC204
🇺🇸 US 🇨🇦 CA
Spin-On79.50mm Height
View on
Amazon
VARIOUS MFR PG4670EX
🇺🇸 US 🇨🇦 CA
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Timing Cover Repair Sleeve

Brand Part Number Markets Notes Buy
SKF 99169
🇺🇸 US 🇨🇦 CA
Shaft Diameter: 1.654 In
View on
Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Seal

Brand Part Number Markets Notes Buy
SKF 16523
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1982 Delorean DMC 12

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 2.9L V6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Repair Sleeve and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 1982 Delorean DMC 12?

Our catalog currently lists 30 engine parts for the 1982 Delorean DMC 12 across 5 subcategories and 14 brands, covering the 2.9L V6 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1982 Delorean DMC 12?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1982 Delorean DMC 12 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1982 Delorean DMC 12?

Every part on this page is matched to the 2.9L V6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1982 Delorean DMC 12

Engine Parts for Other Delorean DMC 12 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.