1948 Desoto S-11 Ignition Parts

Engine:
3.9L 237cid L6

21 Ignition parts are listed for the 1948 Desoto S-11, in 7 part types, covering the 3.9L 237cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The ignition system on the 1948 Desoto S-11 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (5 parts), Distributor Cap (4 parts) and Distributor Rotor (4 parts). The other 4 part types cover the remaining 8 parts.

Condenser / Capacitor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL118T
🇺🇸 US
T-SeriesTerminal Type: Slide
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Premium

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL96LG
🇺🇸 US
Body Material: PhenolicBlack Brass
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL96BALG
🇺🇸 US
Black AluminumBody Material: Phenolic
View on
Amazon
STANDARD MOTOR PRODUCTS AL96
🇺🇸 US
View on
Amazon
WELLS 5D1065
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL98LG
🇺🇸 US
Height: 1.0 In
Fitment notes — LILAND GLOBAL AL98LG
Height: 1.0 In
PremiumBlack Brass
View on
Amazon
LILAND GLOBAL AL98RBLG
🇺🇸 US
Red BrassPremium
View on
Amazon
STANDARD MOTOR PRODUCTS AL98
🇺🇸 US
View on
Amazon
WELLS 4R1010
🇺🇸 US
Contact Material: Brass
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Breaker Points

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL4556PT
🇺🇸 US
T-Series
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
FVP UC14F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0057
🇺🇸 US
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WELLS 5C1063
🇺🇸 US
Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness.
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4219
🇺🇸 US
Autolite IGS, IAP Distributors, Lobe Sensor Module6 Volt
Fitment notes — WELLS 1A4219
Autolite IGS, IAP Distributors, Lobe Sensor Module6 Voltwith Positive Ground
View on
Amazon
WELLS 1A4218
🇺🇸 US
Autolite IGS, IAP Distributors, Lobe Sensor Module6 Volt
Fitment notes — WELLS 1A4218
Autolite IGS, IAP Distributors, Lobe Sensor Module6 VoltNegative Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Brand Part Number Markets Notes Buy
ACDELCO R45
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R45
ProfessionalConventionalPre-Set Gap: 0.040"
Original Equipment-Recommended Gap: .030
View on
Amazon
CHAMPION 511
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 511
Copper PlusPre-Set Gap: 0.03"
Non-Resistor TypeOE-Recommended Gap: 0.035"
View on
Amazon
CHAMPION 592
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 592
Copper PlusPre-Set Gap: 0.03"
Resistor TypeOE-Recommended Gap: 0.035"
View on
Amazon
CHAMPION 592C
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 592C
Copper Plus
Resistor TypeOE-Recommended Gap: 0.035"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1948 Desoto S-11

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 3.9L 237cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Distributor Cap .

Frequently Asked Questions

How many ignition parts fit the 1948 Desoto S-11?

Our catalog currently lists 21 ignition parts for the 1948 Desoto S-11 across 7 subcategories and 7 brands, covering the 3.9L 237cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1948 Desoto S-11?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1948 Desoto S-11?

Notes on this page include pre-set gaps of 0.03", 0.035" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1948 Desoto S-11 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1948 Desoto S-11?

Every part on this page is matched to the 3.9L 237cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1948 Desoto S-11

Ignition Parts for Other Desoto S-11 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.