1971 Detomaso Mangusta Engine Parts

Engine:
5.0L V8

126 Engine parts are listed for the 1971 Detomaso Mangusta, in 33 part types, covering the 5.0L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 1971 Detomaso Mangusta covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Valve Cover Gasket (13 parts), Connecting Rod Bearing (9 parts) and Crankshaft Seal (9 parts). The other 30 part types cover the remaining 95 parts.

Connecting Rod Bearing

High Performance

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS CR804HPN
🇺🇸 US
SetAlecular (Racing Line)
Fitment notes — KING ENGINE BEARINGS CR804HPN
SetAlecular (Racing Line)
Narrow
View on
Amazon
KING ENGINE BEARINGS CR804HPNX
🇺🇸 US
Setwith Extra Oil Clearance
Fitment notes — KING ENGINE BEARINGS CR804HPNX
Setwith Extra Oil Clearancealecular (racing line)
View on
Amazon
KING ENGINE BEARINGS CR804XPN
🇺🇸 US
Race bearings, Trimetal [Pmax Black]Set
Fitment notes — KING ENGINE BEARINGS CR804XPN
Race bearings, Trimetal [Pmax Black]Set
Narrow
View on
Amazon
KING ENGINE BEARINGS CR804XPNX
🇺🇸 US
SetTrimetal
Fitment notes — KING ENGINE BEARINGS CR804XPNX
SetTrimetalPmax Black Race BearingsWith Extra Oil Clearance
(Size: Standard)
View on
Amazon
KING ENGINE BEARINGS CR804XPNCX
🇺🇸 US
pmaxkote (racing line), polymer coatedSet
Fitment notes — KING ENGINE BEARINGS CR804XPNCX
pmaxkote (racing line), polymer coatedSetwith Extra Oil Clearance
(Size: Standard)
View on
Amazon
KING ENGINE BEARINGS CR804XPND
🇺🇸 US
Race bearings, Trimetal [Pmax Black]Set
Fitment notes — KING ENGINE BEARINGS CR804XPND
Race bearings, Trimetal [Pmax Black]Set
Narrowwith dowel hole
View on
Amazon
KING ENGINE BEARINGS CR804XPNDX
🇺🇸 US
Race bearings, Trimetal [Pmax Black]Set
Fitment notes — KING ENGINE BEARINGS CR804XPNDX
Race bearings, Trimetal [Pmax Black]Setwith Extra Oil Clearance
Narrowwith dowel hole (Size: Standard)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Popular CR804SI
🇺🇸 US
SetBimetal (Aluminum Silicon Base)
View on
Amazon
KING ENGINE BEARINGS Popular CR804SIX
🇺🇸 US
Setbimetal (aluminum silicon base)
Fitment notes — KING ENGINE BEARINGS CR804SIX
Setbimetal (aluminum silicon base)with Extra Oil Clearance
(Size: Standard)
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand Part Number Markets Notes Buy
ARP 1546002
🇺🇸 US 🇨🇦 CA
Kit
View on
Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO CS85484
🇺🇸 US
Multi-Piece
Fitment notes — FEL-PRO CS85484
Multi-Piece
Water Pump to Plate Gaskets Not Included
View on
Amazon
VICTOR REINZ 081009401
🇺🇸 US
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

High Performance

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Popular MB529XP
🇺🇸 US
SetRace bearings, Trimetal [Pmax Black]
View on
Amazon
KING ENGINE BEARINGS MB529HP
🇺🇸 US
alecular (racing line)Set
View on
Amazon
KING ENGINE BEARINGS MB529HPX
🇺🇸 US
alecular (racing line)Set
Fitment notes — KING ENGINE BEARINGS MB529HPX
alecular (racing line)Setwith Extra Oil Clearance
View on
Amazon
KING ENGINE BEARINGS MB529XPC
🇺🇸 US
pmaxkote (racing line), polymer coatedSet
View on
Amazon
KING ENGINE BEARINGS MB529XPCX
🇺🇸 US
pmaxkote (racing line), polymer coatedSet
Fitment notes — KING ENGINE BEARINGS MB529XPCX
pmaxkote (racing line), polymer coatedSetwith Extra Oil Clearance
(Size: Standard)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Popular MB529SI
🇺🇸 US
SetBimetal (Aluminum Silicon Base)
View on
Amazon
KING ENGINE BEARINGS MB529SIX
🇺🇸 US
Setbimetal (aluminum silicon base)
Fitment notes — KING ENGINE BEARINGS MB529SIX
Setbimetal (aluminum silicon base)with Extra Oil Clearance
(Size: Standard)
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand Part Number Markets Notes Buy
ARP 1545001
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA NS88187
🇺🇸 US
Front
View on
Amazon
NATIONAL 99187
🇺🇸 US
FrontStandard Size Sleeve
View on
Amazon
SCHAEFFLER SR3506
🇺🇸 US
0.531 In Width1.875 In Inside Diameter
View on
Amazon
WJB / INMOTION PARTS WS99187
🇺🇸 US
FrontStandard Size Sleeve
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular BS30136
🇺🇸 US
Rubber
Fitment notes — FEL-PRO BS30136
Rubber
RearTwo Piece
View on
Amazon
NATIONAL Popular 2942
🇺🇸 US
Front
View on
Amazon
BCA NS2942
🇺🇸 US
Front
View on
Amazon
MAHLE / CLEVITE JV730R
🇺🇸 US
RubberSet
Fitment notes — MAHLE / CLEVITE JV730R
RubberSet
2 piecerear
View on
Amazon
MAHLE / CLEVITE JV730
🇺🇸 US
Set
Fitment notes — MAHLE / CLEVITE JV730
Set
Engine VIN FRope Packing SealRear
View on
Amazon
NATIONAL 5108
🇺🇸 US
RearSplit Type
View on
Amazon
SCHAEFFLER SS2894
🇺🇸 US
FrontLonglife
Fitment notes — SCHAEFFLER SS2894
FrontLonglife7.9502 mm Width65.1764 mm Outside Diameter
View on
Amazon
VICTOR REINZ 191015601
🇺🇸 US
Molded Rubber and MetalSet
Fitment notes — VICTOR REINZ 191015601
Molded Rubber and MetalSet
Rear2 Piece
View on
Amazon
WJB / INMOTION PARTS WS2942
🇺🇸 US
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
ARP Popular 1543601
🇺🇸 US 🇨🇦 CA
Setstandard head bolt kit
View on
Amazon
MAHLE / CLEVITE Popular GS33316
🇺🇸 US
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33316
Cylinder Head Bolt KitSetSteel
View on
Amazon
ARP 1543701
🇺🇸 US 🇨🇦 CA
Set12 Point Bolt Head
View on
Amazon
ARP 4543601
🇺🇸 US 🇨🇦 CA
SetStainless Steel Hex Bolt Head
View on
Amazon
ARP 1543605
🇺🇸 US 🇨🇦 CA
SetHex Bolt Head
View on
Amazon
ARP 1544005
🇺🇸 US 🇨🇦 CA
Stud Type
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular 9333PT1
🇺🇸 US
Engine VIN Fwith High Performance Engine
View on
Amazon
MAHLE / CLEVITE Popular 3428
🇺🇸 US
Composite
Fitment notes — MAHLE / CLEVITE 3428
Composite
Engine VIN F
View on
Amazon
FEL-PRO 8548PT2
🇺🇸 US
Permatorque
Fitment notes — FEL-PRO 8548PT2
Permatorque
Engine VIN F
View on
Amazon
FEL-PRO 8346PT
🇺🇸 US
Engine VIN G
View on
Amazon
MAHLE / CLEVITE 3428SG
🇺🇸 US
Graphite
Fitment notes — MAHLE / CLEVITE 3428SG
Graphite
Engine VIN F
View on
Amazon
VICTOR REINZ 611032800
🇺🇸 US
Engine VIN F
View on
Amazon
VICTOR REINZ 611055000
🇺🇸 US
Composite
Fitment notes — VICTOR REINZ 611055000
Composite
Engine VIN G
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO HS8548PT11
🇺🇸 US
Includes Valve Stem SealsSpecial High Performance Intake Manifold Gaskets and Valve Stem Seals, Intake Valve Stem Seals Not Included
Fitment notes — FEL-PRO HS8548PT11
Includes Valve Stem SealsSpecial High Performance Intake Manifold Gaskets and Valve Stem Seals, Intake Valve Stem Seals Not Included
Engine VIN F
View on
Amazon
MAHLE / CLEVITE HS3530VJ
🇺🇸 US
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS3530VJ
Includes Valve Stem Seals
Exhaust Pipe Gasket Not Included
View on
Amazon
VICTOR REINZ 021060201
🇺🇸 US
Engine VIN Fwithout Special High Performance Engine
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Spacer Shim

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 3428SH
🇺🇸 US
Engine VIN F
View on
Amazon
VICTOR REINZ 711638100
🇺🇸 US
Engine VIN F
View on
Amazon

This table covers the Cylinder Head Spacer shims.

Engine Block Heater

Brand Part Number Markets Notes Buy
KAT'S HEATERS 11610
🇺🇸 US
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 11610
Freeze Plug Heater
Electrical Plug End600 WattsButterfly AttachmentEasiest Mounting Location: Rear RightElement Must Face 7 Oclock Position To Avoid Contact with Engine Wall
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Popular FS8548PT16
🇺🇸 US
Overhaul SetValve Stem Seals Not Included
Fitment notes — FEL-PRO FS8548PT16
Overhaul SetValve Stem Seals Not IncludedMulti-PieceDoes Not Include Intake Manifold Gasket(S)
Engine VIN FWater Pump to Plate Gaskets Not Included
View on
Amazon
MAHLE / CLEVITE Popular 953367
🇺🇸 US
Cylinder Head Bolts Not IncludedFull Gasket Set
Fitment notes — MAHLE / CLEVITE 953367
Cylinder Head Bolts Not IncludedFull Gasket Set
Engine Set
View on
Amazon
ENGINE PRO 301125
🇺🇸 US
Premium Valve Stem Seals IncludedThermactor Emission Intake Manifold Gaskets Not Included
View on
Amazon
ENGINE PRO 311002
🇺🇸 US
FEL-Pro CO-Branded Performance Gasket Sets with Permatorque Steel Core Laminate Head Gaskets
Fitment notes — ENGINE PRO 311002
FEL-Pro CO-Branded Performance Gasket Sets with Permatorque Steel Core Laminate Head Gaskets
Except Boss 302 Engines
View on
Amazon
ENGINE PRO 311002MLS
🇺🇸 US
FEL-Pro CO-Branded Perfomance Gasket Sets with MLS Head Gaskets
Fitment notes — ENGINE PRO 311002MLS
FEL-Pro CO-Branded Perfomance Gasket Sets with MLS Head Gaskets
Except Boss 302 Engines
View on
Amazon
FEL-PRO FS8346PT
🇺🇸 US
Overhaul SetMulti-Piece
Fitment notes — FEL-PRO FS8346PT
Overhaul SetMulti-Piece
Engine VIN GWater Pump to Plate Gaskets Not Included
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Harmonic Balancer Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Popular 88187
🇺🇸 US
View on
Amazon
BCA NS88187
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE A2262
🇺🇸 US
Nickel Plated Formed Steel
Fitment notes — MAHLE / CLEVITE A2262
Nickel Plated Formed Steel
0.013 IN Thickness
View on
Amazon
MAHLE / CLEVITE 66595RS
🇺🇸 US
Nickel Plated Formed Steel
Fitment notes — MAHLE / CLEVITE 66595RS
Nickel Plated Formed Steel
0.020 IN Thickness
View on
Amazon
WJB / INMOTION PARTS WS88187
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.

Intake Manifold Bolt

Brand Part Number Markets Notes Buy
ARP 1542001
🇺🇸 US 🇨🇦 CA
Hex Bolt Head
View on
Amazon
ARP 4542001
🇺🇸 US 🇨🇦 CA
Stainless Steel Hex Bolt Head
View on
Amazon
ARP 4542101
🇺🇸 US 🇨🇦 CA
12 Point Bolt Head
View on
Amazon

This table covers the Intake Manifold bolts.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular MS901031
🇺🇸 US
Set
Fitment notes — FEL-PRO MS901031
Set
LowerEngine VIN FExcept High Performance
View on
Amazon
FEL-PRO MS901161
🇺🇸 US
Set
Fitment notes — FEL-PRO MS901161
Set
LowerEngine VIN FHigh Performance
View on
Amazon
MAHLE / CLEVITE MS15172
🇺🇸 US
Composite
Fitment notes — MAHLE / CLEVITE MS15172
Composite
Engine VIN F1.16 IN X 1.96 IN Port Size
View on
Amazon
VICTOR REINZ 111037601
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 111037601
Set
Engine VIN FHigh Performance
View on
Amazon
VICTOR REINZ 111014001
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 111014001
Set
Engine VIN FExcept High Performance
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 70822
🇺🇸 US
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer
Fitment notes — FEL-PRO 70822
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat WasherPlastic
View on
Amazon
VICTOR REINZ 711346200
🇺🇸 US
0.500 IN Inside Diameter
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN B2
🇺🇸 US
Spin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter Gasket / O-Ring

Brand Part Number Markets Notes Buy
FEL-PRO 70135
🇺🇸 US
Engine VIN G
View on
Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ 711387600
🇺🇸 US
Engine VIN GAdapter
View on
Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Bolt

Brand Part Number Markets Notes Buy
ARP 2541802
🇺🇸 US 🇨🇦 CA
Hex Bolt Head
View on
Amazon

This table covers the Oil Pan bolts.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular OS13260C
🇺🇸 US
Cork
Fitment notes — FEL-PRO OS13260C
Cork
Multi Piece
View on
Amazon
FEL-PRO Popular OS13260T
🇺🇸 US
Permadryplus One Piece MoldedIncludes Snaps
View on
Amazon
ENGINE PRO 3113260
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE OS30531
🇺🇸 US
Cork-Rubber
Fitment notes — MAHLE / CLEVITE OS30531
Cork-Rubber
2 Piece Oil Pan Gasket
View on
Amazon
MAHLE / CLEVITE OS30531TC
🇺🇸 US
Cork with Metal Carrier
Fitment notes — MAHLE / CLEVITE OS30531TC
Cork with Metal Carrier
2 Piece Oil Pan Gasket
View on
Amazon
MAHLE / CLEVITE OS32563
🇺🇸 US
Includes Installation PinsMolded Rubber
Fitment notes — MAHLE / CLEVITE OS32563
Includes Installation PinsMolded Rubber
1 Piece Oil Pan Gasket
View on
Amazon
VICTOR REINZ 101016201
🇺🇸 US
View on
Amazon
VICTOR REINZ 101007501
🇺🇸 US
Improved Design
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 70083
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE B26553
🇺🇸 US
Paper
View on
Amazon
VICTOR REINZ 711462300
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Pickup Tube Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 72516
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE B26151
🇺🇸 US
Paper
View on
Amazon
VICTOR REINZ 711350300
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Shaft

Brand Part Number Markets Notes Buy
ARP 1547904
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Pump shafts.

Timing Cover Bolt

Brand Part Number Markets Notes Buy
ARP 1543202
🇺🇸 US 🇨🇦 CA
With aluminum timing cover & aluminum water pumpHex Bolt Head
View on
Amazon
ARP 1543201
🇺🇸 US 🇨🇦 CA
12 Point Bolt Head
View on
Amazon
ARP 1543204
🇺🇸 US 🇨🇦 CA
With aluminum timing cover & cast iron water pumpHex Bolt Head
View on
Amazon
ARP 4541504
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Timing Cover bolts.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular TCS45008
🇺🇸 US
Repair Sleeve Not Included
Fitment notes — FEL-PRO TCS45008
Repair Sleeve Not Included
Water Pump to Plate Gaskets Not Included
View on
Amazon
FEL-PRO Popular TCS45168
🇺🇸 US
with Sleeve 'N' Seal
Fitment notes — FEL-PRO TCS45168
with Sleeve 'N' Seal
Water Pump to Plate Gaskets Not Included
View on
Amazon
MAHLE / CLEVITE T27802
🇺🇸 US
Paper
View on
Amazon
MAHLE / CLEVITE JV856
🇺🇸 US
Set
Fitment notes — MAHLE / CLEVITE JV856
Set
Repair Sleeve not Included
View on
Amazon
MAHLE / CLEVITE JV922
🇺🇸 US
SetIncludes Repair Sleeve
View on
Amazon
VICTOR REINZ 151025301
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 151025301
Set
without Sleeve
View on
Amazon
VICTOR REINZ 151022001
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 151022001
Set
with Repair Sleeve
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve

Brand Part Number Markets Notes Buy
FEL-PRO 16213
🇺🇸 US
Use with Installation Tool
View on
Amazon
VICTOR REINZ 711346500
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Repair Sleeve Tool

Brand Part Number Markets Notes Buy
VICTOR REINZ 711541700
🇺🇸 US
View on
Amazon

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 46293
🇺🇸 US
Rubber
Fitment notes — MAHLE / CLEVITE 46293
Rubber
Front Entry
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover

Brand Part Number Markets Notes Buy
ENGINE PRO 311684
🇺🇸 US
View on
Amazon

This table covers the Valve covers.

Valve Cover Gasket

Premium

Brand Part Number Markets Notes Buy
FEL-PRO Popular VS13264T
🇺🇸 US
Permadryplus
Fitment notes — FEL-PRO VS13264T
Permadryplus
Engine VIN Fwith 6 Bolt Valve Cover
View on
Amazon
MAHLE / CLEVITE VS50203
🇺🇸 US
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS50203
SetMolded Rubber
with Steel Reinforcement
View on
Amazon
VICTOR REINZ 151064301
🇺🇸 US
SetImproved Design
Fitment notes — VICTOR REINZ 151064301
SetImproved DesignCork Rubber or Rubber Coated Metal
Engine VIN F
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
FEL-PRO Popular VS13264C
🇺🇸 US
Cork
Fitment notes — FEL-PRO VS13264C
Cork
Engine VIN Fwith 6 Bolt Valve Cover
View on
Amazon
FEL-PRO Popular VS50029C
🇺🇸 US
High Temperature Design
Fitment notes — FEL-PRO VS50029C
High Temperature Design
Engine VIN Fwith 6 Bolt Valve Coverwith Compression Stops
View on
Amazon
FEL-PRO VS13264R
🇺🇸 US
Rubber
Fitment notes — FEL-PRO VS13264R
Rubber
Engine VIN Fwith 6 Bolt Valve Cover
View on
Amazon
FEL-PRO VS50068C
🇺🇸 US
Cork
Fitment notes — FEL-PRO VS50068C
Cork
Engine VIN Gwith 8 Bolt Valve Cover
View on
Amazon
FEL-PRO VS50068R
🇺🇸 US
Rubber
Fitment notes — FEL-PRO VS50068R
Rubber
Engine VIN Gwith 8 Bolt Valve Cover
View on
Amazon
MAHLE / CLEVITE VS38300R
🇺🇸 US
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS38300R
SetMolded Rubber
without Steel Reinforcement
View on
Amazon
MAHLE / CLEVITE VS38422R
🇺🇸 US
SetMolded Rubber
View on
Amazon
VICTOR REINZ 151050901
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 151050901
Set
Engine VIN F
View on
Amazon
VICTOR REINZ 151053101
🇺🇸 US
SetCork Rubber
Fitment notes — VICTOR REINZ 151053101
SetCork Rubber
Engine VIN G
View on
Amazon
VICTOR REINZ 151051001
🇺🇸 US
SetHigh Temperature Design
Fitment notes — VICTOR REINZ 151051001
SetHigh Temperature Design
Engine VIN Fwith Compression Stops
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular SS72562
🇺🇸 US
Set
Fitment notes — FEL-PRO SS72562
Set
ExhaustEngine VIN F
View on
Amazon
FEL-PRO SS133641
🇺🇸 US
Set
Fitment notes — FEL-PRO SS133641
Set
IntakeEngine VIN F
View on
Amazon
MAHLE / CLEVITE SS45399
🇺🇸 US
PolyacrylicContains 16 PCS
Fitment notes — MAHLE / CLEVITE SS45399
PolyacrylicContains 16 PCS
Intake and ExhaustShedder Type
View on
Amazon
VICTOR REINZ 121005801
🇺🇸 US
SetContains 8 Pieces
Fitment notes — VICTOR REINZ 121005801
SetContains 8 Pieces
ExhaustEngine VIN F
View on
Amazon
VICTOR REINZ 121005901
🇺🇸 US
SetContains 8 Pieces
Fitment notes — VICTOR REINZ 121005901
SetContains 8 Pieces
IntakeEngine VIN F
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1971 Detomaso Mangusta

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 5.0L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Valve Cover Gasket and Connecting Rod Bearing .

Frequently Asked Questions

How many engine parts fit the 1971 Detomaso Mangusta?

Our catalog currently lists 126 engine parts for the 1971 Detomaso Mangusta across 33 subcategories and 12 brands, covering the 5.0L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1971 Detomaso Mangusta?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1971 Detomaso Mangusta was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1971 Detomaso Mangusta?

Every part on this page is matched to the 5.0L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1971 Detomaso Mangusta

Engine Parts for Other Detomaso Mangusta Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.