This page lists 12 suspension parts for the 2008 Dodge Atos, across 6 part types, covering the 1.1L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2008 Dodge Atos, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. Most of the listed parts are Shock / Strut (3 parts), Ball Joint (2 parts) and Control Arm (2 parts). The other 3 part types cover the remaining 5 parts.
Every part on this page is matched to the 1.1L L4 — the only engine offered in the 2008 Dodge Atos.
The most listed brands for 2008 Dodge Atos suspension parts are DORMAN (6 parts), SENSEN (2 parts) and FVP (1 part), plus 3 more brands. Quality grades include Economy, Daily Driver and Original Ride Quality.
Each part number listed for the 2008 Dodge Atos opens a page with every vehicle that part fits.
Ball Joint
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 539733 | 🇲🇽 MX | Front Lower | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | BJ51015 | 🇲🇽 MX | Front Lower | View on Amazon |
This table covers the ball joints that articulate each control arm at the knuckle.
2 Ball Joint parts for the 2008 Dodge Atos come from 2 brands — DORMAN and FVP.
In the Daily Driver grade, DORMAN supplies 1 part: grouped for everyday commuting duty. A representative part number is DORMAN 539733.
The Economy section lists 1 option from FVP — the catalog's value-priced group. FVP BJ51015 is listed in this group.
This group includes DORMAN 539733 and FVP BJ51015.
Control Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 524299 | 🇲🇽 MX | Front Left Lower | View on Amazon |
| DORMAN | 524300 | 🇲🇽 MX | Front Right Lower | View on Amazon |
This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.
2 Control Arm parts for the 2008 Dodge Atos come from DORMAN.
Listed part numbers: DORMAN 524299 and DORMAN 524300.
Control Arm Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 533647 | 🇲🇽 MX | Front Lower Forward | View on Amazon |
| DORMAN | 533648 | 🇲🇽 MX | Front Lower Rearward | View on Amazon |
This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
2 Control Arm Bushing parts for the 2008 Dodge Atos come from DORMAN.
Part numbers include DORMAN 533647 and DORMAN 533648.
Shock / Strut
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SENSEN | 42130652 | 🇲🇽 MX | Front Right | View on Amazon |
| SENSEN | 42130653 | 🇲🇽 MX | Front Left | View on Amazon |
Original Ride Quality
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FCS | 347399 | 🇲🇽 MX | Rear | View on Amazon |
This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed.
3 Shock / Strut parts for the 2008 Dodge Atos come from 2 brands — SENSEN and FCS.
The Economy section: 2 options from SENSEN. SENSEN 42130652 is listed in this group.
The Original Ride Quality section lists 1 option from FCS — grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. FCS 347399 is listed in this group.
Part numbers include SENSEN 42130652, SENSEN 42130653 and FCS 347399.
Shock / Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL | SPM6722 | 🇲🇽 MX | Front | View on Amazon |
| WESTAR | ST98004 | 🇲🇽 MX | Front | View on Amazon |
This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
2 Shock / Strut Mount parts are listed for the 2008 Dodge Atos, from DEA / MARMON RIDE CONTROL and WESTAR.
Part numbers include DEA / MARMON RIDE CONTROL SPM6722 and WESTAR ST98004.
Sway Bar Link
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 541838 | 🇲🇽 MX | Front | View on Amazon |
This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it.
This group shows a single part: DORMAN 541838.
Buying Suspension Parts for a 2008 Dodge Atos
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 1.1L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Shock / Strut and Ball Joint .
Frequently Asked Questions
How many suspension parts fit the 2008 Dodge Atos?
Our catalog currently lists 12 suspension parts for the 2008 Dodge Atos across 6 subcategories and 6 brands, covering the 1.1L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2008 Dodge Atos?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Dodge Atos was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Dodge Atos?
Every part on this page is matched to the 1.1L L4 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Dodge Atos
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.