2009 Dodge Ram 4000 Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Camshaft Bearing parts are listed for the 2009 Dodge Ram 4000, from DURA-BOND and KING ENGINE BEARINGS.

Part numbers include DURA-BOND PD41, DURA-BOND PDP41T and DURA-BOND PDP41, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 5 Connecting Rod Bearing parts for the 2009 Dodge Ram 4000. KING ENGINE BEARINGS CR8032SM carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR8032XPN.

The Standard Replacement section lists 2 options from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR8032SM is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include KING ENGINE BEARINGS CR8032SM, KING ENGINE BEARINGS CR8032XPN and KING ENGINE BEARINGS CR8032XPNX, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: DORMAN 635333.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2009 Dodge Ram 4000, from ATP, DORMAN and PIONEER.

This group includes ATP 102348, DORMAN 594427 and PIONEER DA7035.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2009 Dodge Ram 4000 come from 3 brands — ANCHOR, PIONEER and DEA / MARMON RIDE CONTROL. The "Popular" part is ANCHOR 3397.

This group includes ANCHOR 3397, ANCHOR 3396 and DEA / MARMON RIDE CONTROL AM044 and the remaining parts above.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL AM043.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

2 Oil parts for the 2009 Dodge Ram 4000 come from PENTOSIN.

Part numbers include PENTOSIN 8044214 and PENTOSIN 8044216.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2009 Dodge Ram 4000 come from 2 brands — DORMAN and AGS.

This group includes AGS ODP00007, DORMAN 090172 and DORMAN 092020.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO111.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 2009 Dodge Ram 4000 come from 5 brands — FVP, VARIOUS MFR, WIX and 2 other brands. The "Popular" part is MOBIL M1210A.

The Economy section lists 3 options from FVP, PRO-TEC and VARIOUS MFR — the catalog's value-priced group. FVP R7899 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1210A is listed in this group.

Standard Replacement: 3 parts, from FVP, VARIOUS MFR and WIX. A representative part number is FVP R7899XL.

This group includes MOBIL M1210A, FVP R7899 and PRO-TEC PXL57899 and the remaining parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2009 Dodge Ram 4000, from DORMAN, LILAND GLOBAL, SKP and 1 other brand.

Part numbers include DORMAN 264260, LILAND GLOBAL ICRP34A and SKP SK264260, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

SILV-O-LITE supplies the 4 Piston parts for the 2009 Dodge Ram 4000.

This group includes SILV-O-LITE 3257HCA, SILV-O-LITE 3260HCA and SILV-O-LITE 3257HCAK1 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts are listed for the 2009 Dodge Ram 4000, from HASTINGS MANUFACTURING and SEALED POWER.

This group includes HASTINGS MANUFACTURING 2M5141S, HASTINGS MANUFACTURING 2M5141 and SEALED POWER E991K.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: ENGINETECH ERKW355A.

This table covers the Thrust washers. Read more

This group shows a single part: KING ENGINE BEARINGS TW1003AM.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: INA ZC01441K.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: INA ZS0122.

This table covers the Valve covers. Read more

One part is listed for the 2009 Dodge Ram 4000 — DORMAN 264495.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: DORMAN 916595.