2019 Dodge Durango Drivetrain Parts

This table covers the Axle / Differential assemblies. Read more

MOPAR supplies the 3 Axle / Differential Assembly parts for the 2019 Dodge Durango.

Listed part numbers: MOPAR 68378936AC, MOPAR 68378939AC and MOPAR 68378938AC.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts for the 2019 Dodge Durango come from 3 brands — TIMKEN, SKF and WJB / INMOTION PARTS. The "Popular" part is SKF 17626A. 4 parts fit every engine; the other 2 are engine-specific.

This group includes SKF 17626A, TIMKEN SL260192 and TIMKEN SL260181 and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

31 CV Axle parts for the 2019 Dodge Durango come from 6 brands — TRAKMOTIVE, GSP, MOPAR and 3 other brands. The "Popular" part is GSP NCV10063. A list this long means CV Axle applications vary by configuration — the notes carry the qualifiers.

This table covers the constant-velocity joints at each end of a drive axle. Read more

This group shows a single part: APWI CH5307.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Differential Carrier Bushing parts for the 2019 Dodge Durango come from DORMAN.

Part numbers include DORMAN 541012 and DORMAN 541011.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Differential Lock Actuator parts for the 2019 Dodge Durango come from 2 brands — AUTOTECNICA and MOPAR.

Part numbers include AUTOTECNICA CY0418708 and MOPAR 68214628AA.

This table covers the Differential Lock motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

This group shows a single part: DORMAN 699996.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

MOPAR supplies the 4 Differential Mount parts for the 2019 Dodge Durango.

Part numbers include MOPAR 68091399AA, MOPAR 68091398AA and MOPAR 68088618AC, among others listed above.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

This group shows a single part: MOPAR 68071233AB.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts for the 2019 Dodge Durango come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8).

This group includes SKF 19877A, TIMKEN SL260540 and WJB / INMOTION PARTS WS19877A.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

ELRING supplies the 6 Differential Seal parts for the 2019 Dodge Durango. 4 parts fit every engine; the other 2 are engine-specific.

Part numbers include ELRING B12950, ELRING B12970 and ELRING B17490, among others listed above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

21 Drive Shaft parts are listed for the 2019 Dodge Durango, from MOPAR, TOP NOTCH, DORMAN and 4 other brands. MOPAR 53011150AB carries the "Popular" badge. 3 parts fit every engine; the other 18 are engine-specific.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING B15340.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

5 Gear Oil parts for the 2019 Dodge Durango come from 3 brands — MOPAR, VALVOLINE and IDEMITSU. 4 parts fit every engine; the other 1 is engine-specific.

The SAE 75W-85 section lists 2 options from MOPAR — grouped under the catalog's "SAE 75W-85" designation — the notes column spells out what sets them apart. MOPAR 68232947AC is listed in this group.

The SAE 75W-90 section lists 1 option from IDEMITSU — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. IDEMITSU 30305024750 is listed in this group.

2 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include MOPAR 68232947AC, MOPAR 68083381AA and IDEMITSU 30305024750, among others listed above.

This table covers the Transfer Case assemblies. Read more

3 Transfer Case Assembly parts for the 2019 Dodge Durango come from MOPAR.

Listed part numbers: MOPAR 68370968AC, MOPAR R8370968AB and MOPAR R5038879AB.

This table covers the Transfer Case control modules. Read more

3 Transfer Case Control Module parts are listed for the 2019 Dodge Durango, from MOPAR and DORMAN. All of them fit every engine offered in the 2019 Durango.

Listed part numbers: DORMAN 599321, MOPAR 68250125AG and MOPAR 68423302AA.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

20 Transfer Case Fluid parts for the 2019 Dodge Durango come from 6 brands — VALVOLINE, PENTOSIN, LUCAS OIL and 3 other brands. The "Popular" part is VALVOLINE 822348. 10 parts fit every engine; the other 10 are engine-specific.

The ATF +4 section lists 5 options from VALVOLINE and PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. VALVOLINE 822348 is listed in this group.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE, LUCAS OIL and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type T-4 (Type T-IV) section lists 2 options from IDEMITSU — grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. IDEMITSU 30040093750 is listed in this group.

The ZF Fluid section lists 3 options from PENTOSIN — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Input Shaft Bearing parts for the 2019 Dodge Durango come from 3 brands — NATIONAL, BCA and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 210. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8).

Part numbers include NATIONAL 210, NATIONAL 110L and BCA NB210, among others listed above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Input Shaft Seal parts are listed for the 2019 Dodge Durango, from NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand. NATIONAL 710684 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

This group includes NATIONAL 710684, NATIONAL 710627 and BCA NS710684 and the remaining parts above.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

8 Transfer Case Motor parts are listed for the 2019 Dodge Durango, from DORMAN, MOPAR, AUTOTECNICA and 5 other brands. DORMAN 600938 carries the "Popular" badge. 5 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: DORMAN 600938, MOPAR 68071235AC and AUTOTECNICA CY0419233, plus the other parts above.

This table covers the Transfer Case mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2019 Dodge Durango — MOPAR 68394110AA.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

14 Transfer Case Output Shaft Bearing parts are listed for the 2019 Dodge Durango, from NATIONAL, BCA, WJB / INMOTION PARTS and 1 other brand. WJB / INMOTION PARTS RB6207 carries the "Popular" badge. All of them fit every engine offered in the 2019 Durango.

In the Economy grade, WJB / INMOTION PARTS supplies 3 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB6207.

The Standard Replacement section lists 10 options from NATIONAL, BCA and SCHAEFFLER — built to original-equipment specification. NATIONAL 207 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

8 Transfer Case Output Shaft Repair Sleeve parts for the 2019 Dodge Durango come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. The "Popular" part is NATIONAL 99139. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8).

Part numbers include NATIONAL 99139, WJB / INMOTION PARTS WS99210 and BCA NS99139, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Transfer Case Output Shaft Seal parts for the 2019 Dodge Durango come from 3 brands — NATIONAL, BCA and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 710694. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8).

Listed part numbers: NATIONAL 710694, NATIONAL 710660 and BCA NS710694, plus the other parts above.

This table covers the Transfer Case Range position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

2 Transfer Case Range Position Sensor parts for the 2019 Dodge Durango come from 2 brands — DORMAN and WELLS. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8).

Part numbers include DORMAN 699997 and WELLS 5S17626.

This table covers the Transfer Case sprockets. Read more

One part is listed for the 2019 Dodge Durango — MOPAR 68071222AA.

This table covers the vents on the transfer case. Read more

One part is listed for the 2019 Dodge Durango — MOPAR 68001633AB.

This table covers the Transfer Case Vent hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

This group shows a single part: MOPAR 68196571AA.