2022 Dodge Challenger Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

14 Coolant / Antifreeze parts for the 2022 Dodge Challenger come from 4 brands — VALVOLINE, PEAK, PRESTONE and 1 other brand. The "Popular" part is VALVOLINE ZXG051. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).

The Economy section lists 3 options from PEAK, PRESTONE and VALVOLINE — the catalog's value-priced group. PEAK BQA1GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE ZXG051.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, VALVOLINE, AISIN and PEAK supply 5 parts: built to original-equipment specification. A representative part number is VALVOLINE ZXEL1.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

6 Coolant Hose / Pipe parts for the 2022 Dodge Challenger come from MOPAR. The "Popular" part is MOPAR 68259405AA.

This group includes MOPAR 68259405AA, MOPAR 5181873AC and MOPAR 5181964AB and the remaining parts above.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2022 Dodge Challenger — ELRING B63130.

This table covers the Coolant Hose Connector flanges. Read more

This group shows a single part: DORMAN 47297.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

11 Coolant Reservoir parts are listed for the 2022 Dodge Challenger, from TECHPRO, MOPAR, DORMAN and 3 other brands. DORMAN 603380 carries the "Popular" badge. 2 parts fit every engine; the other 9 are engine-specific.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

11 Coolant Reservoir Cap parts are listed for the 2022 Dodge Challenger, from MOTORAD, GATES and ULTRA-POWER. MOTORAD ST18 carries the "Popular" badge.

The Locking Replacement section lists 4 options from MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. MOTORAD ST18 is listed in this group.

The Standard Replacement section: 4 options from MOTORAD, GATES and ULTRA-POWER. MOTORAD T18 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Hose clamps. Read more

8 Hose Clamp parts for the 2022 Dodge Challenger come from MOPAR. The "Popular" part is MOPAR 55056415AA. 1 part fits every engine; the other 7 are engine-specific.

Part numbers include MOPAR 55056415AA, MOPAR 6502017 and MOPAR 6502018, among others listed above.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

24 Radiator parts for the 2022 Dodge Challenger come from 12 brands — GPD, ULTRA-POWER, CSF and 9 other brands. The "Popular" part is ULTRA-POWER 13157. 8 parts fit every engine; the other 16 are engine-specific.

The Economy section: 5 options from GPD and ULTRA-POWER. ULTRA-POWER 13157 is listed in this group.

Standard Replacement: 19 parts, from CSF, MOPAR, SPECTRA PREMIUM and 7 other brands. A representative part number is CSF 3525.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Radiator Cap parts for the 2022 Dodge Challenger come from 2 brands — CALORSTAT and MOPAR.

This group includes CALORSTAT RC0151, CALORSTAT RC0153 and MOPAR 55116897AA and the remaining parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

18 Radiator Fan Assembly parts are listed for the 2022 Dodge Challenger, from FOUR SEASONS, GPD, VARIOUS MFR and 7 other brands. SKP SK621526 carries the "Popular" badge.

Economy: 6 parts, from GPD, VARIOUS MFR, SKP and 1 other brand. A representative part number is SKP SK621526.

The Premium section: 2 options from DORMAN. DORMAN 621526XD is listed in this group.

The Standard Replacement section: 10 options from FOUR SEASONS, MOPAR, UAC and 2 other brands. FOUR SEASONS 75934 is listed in this group.

This table covers the Radiator Fan blades. Typical signs include chatter, streaks, or a skip at the top of the stroke. Confirm left and right lengths in the notes — they are often different. Read more

One part is listed for the 2022 Dodge Challenger — MOPAR 5137713AA.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

This group shows a single part: GPD 2312234.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

11 Radiator Hose parts are listed for the 2022 Dodge Challenger, from MOPAR, GATES, CONTINENTAL and 2 other brands. GATES 24600 carries the "Popular" badge.

This table covers the Radiator insulators. Read more

TECHPRO supplies both parts for the 2022 Dodge Challenger.

Listed part numbers: TECHPRO CH3013100 and TECHPRO CH3013102.

This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2022 Dodge Challenger — DORMAN 927290.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

MOPAR supplies the 3 Radiator Mount Bushing parts for the 2022 Dodge Challenger.

This group includes MOPAR 4596474AD, MOPAR 68017994AA and MOPAR 52079419.

This table covers the seals at the Radiator. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

MOPAR supplies the 7 Radiator Seal parts for the 2022 Dodge Challenger. MOPAR 68026556AA carries the "Popular" badge.

Listed part numbers: MOPAR 68026556AA, MOPAR 68233015AA and MOPAR 68396076AA, plus the other parts above.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

17 Temperature Sender / Sensor parts for the 2022 Dodge Challenger come from 11 brands — STANDARD MOTOR PRODUCTS, GPD, HOLSTEIN and 8 other brands. The "Popular" part is DELPHI TS10330.

The Economy section: 7 options from GPD, HOLSTEIN, DORMAN and 2 other brands. DORMAN 926427 is listed in this group.

Standard Replacement: 10 parts, from STANDARD MOTOR PRODUCTS, MOPAR, WELLS and 4 other brands. A representative part number is DELPHI TS10330.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

17 Thermostat parts are listed for the 2022 Dodge Challenger, from MOTORAD, DORMAN, GATES and 7 other brands. DORMAN 9023035 carries the "Popular" badge.

Economy: 4 parts, from DORMAN, AUTOTECNICA and SKP. A representative part number is DORMAN 9023035.

The Heavy Duty section: 1 option from MOTORAD. MOTORAD 5416203 is listed in this group.

The Premium section: 1 option from MOTORAD. MOTORAD 7416203 is listed in this group.

The Standard Replacement section: 9 options from MOTORAD, CALORSTAT, MOPAR and 3 other brands. GATES 34053 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2022 Dodge Challenger come from 3 brands — MAHLE / CLEVITE, MOPAR and FEL-PRO. The "Popular" part is FEL-PRO 35974.

Listed part numbers: FEL-PRO 35974, MAHLE / CLEVITE C32590 and MAHLE / CLEVITE C32591, plus the other parts above.

This table covers the housings and outlets the thermostat sits in. Read more

11 Thermostat Housing / Water Outlet parts are listed for the 2022 Dodge Challenger, from MOPAR, DORMAN, SKP and 4 other brands. DORMAN 9023102HP carries the "Popular" badge.

Economy: 4 parts, from DORMAN and SKP. A representative part number is DORMAN 9023102HP.

The Standard Replacement section: 6 options from MOPAR, AUTOTECNICA, FOUR SEASONS and 1 other brand. AUTOTECNICA CY0719439 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

18 Water Pump parts are listed for the 2022 Dodge Challenger, from FVP, GMB, MOPAR and 9 other brands. SKP SK1204450 carries the "Popular" badge.

Economy: 5 parts, from SKP, BECK/ARNLEY, FVP and 2 other brands. A representative part number is SKP SK1204450.

The Standard Replacement section: 7 options from ACDELCO, GATES, AISIN and 4 other brands. ACDELCO 252983 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Water Pump Gasket parts for the 2022 Dodge Challenger come from 5 brands — MOPAR, AJUSA, FEL-PRO and 2 other brands.

This group includes AJUSA 01704700, FEL-PRO 35982 and MAHLE / CLEVITE K32579 and the remaining parts above.

This table covers the Water Pump Inlet tubes. Read more

One part is listed for the 2022 Dodge Challenger — MOPAR 68165894AE.