2023 Dodge Durango Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

5 Alignment Bolt / Camber Plate parts for the 2023 Dodge Durango come from 4 brands — DORMAN, DELPHI, MOOG and 1 other brand. The "Popular" part is DORMAN 13815.

In the Daily Driver grade, DELPHI and MOOG supply 2 parts: grouped for everyday commuting duty. A representative part number is DELPHI TAL10058.

The Economy section lists 3 options from DORMAN and SKP — the catalog's value-priced group. DORMAN 13815 is listed in this group.

Listed part numbers: DORMAN 13815, DELPHI TAL10058 and MOOG K100130, plus the other parts above.

This table covers the adjusters used to set toe. Read more

2 Alignment Toe Adjuster parts for the 2023 Dodge Durango come from MOOG.

Part numbers include MOOG K100403 and MOOG K100404.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

21 Ball Joint parts for the 2023 Dodge Durango come from 8 brands — MEVOTECH, SUSPENSIA, DELPHI and 5 other brands. The "Popular" part is DELPHI TC3677.

Daily Driver: 15 parts, from SUSPENSIA, DELPHI, MOOG and 3 other brands. A representative part number is DELPHI TC3677.

The Economy section: 4 options from QUICK STEER, MEVOTECH and ULTRA-POWER. MEVOTECH GS25518 is listed in this group.

In the Premium grade, MEVOTECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MEVOTECH TXMS25561.

This table covers the bump stops that limit suspension travel. Read more

MOPAR supplies the 3 Bump Stop parts for the 2023 Dodge Durango.

Part numbers include MOPAR 5168177AC, MOPAR 68063781AE and MOPAR 68029591AD.

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out. Read more

MOPAR supplies the 16 Coil Spring parts for the 2023 Dodge Durango. MOPAR 5181500AB carries the "Popular" badge.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

4 Coil Spring Seat / Insulator parts for the 2023 Dodge Durango come from 3 brands — MOPAR, DEA / MARMON RIDE CONTROL and KYB.

Part numbers include DEA / MARMON RIDE CONTROL 4714129, KYB SM5783 and MOPAR 68029688AE, among others listed above.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

72 Control Arm parts for the 2023 Dodge Durango come from 7 brands — MEVOTECH, MOOG, MOPAR and 4 other brands. The "Popular" part is DELPHI TC3973. They are grouped as Daily Driver, Economy and Premium, with Daily Driver the largest group at 52 parts from MOOG, MOPAR, MEVOTECH and 3 other brands.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

10 Control Arm Bushing parts for the 2023 Dodge Durango come from 3 brands — DORMAN, MEVOTECH and SUSPENSIA. The "Popular" part is DORMAN 540871.

Daily Driver: 3 parts, from MEVOTECH and SUSPENSIA. A representative part number is MEVOTECH MS254103.

The Economy section: 7 options from DORMAN and MEVOTECH. DORMAN 540871 is listed in this group.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

5 Ride Height Sensor parts for the 2023 Dodge Durango come from 3 brands — STANDARD MOTOR PRODUCTS, ARNOTT and MOPAR. The "Popular" part is STANDARD MOTOR PRODUCTS VHS144.

Listed part numbers: STANDARD MOTOR PRODUCTS VHS144, ARNOTT RH5323 and ARNOTT RH5828, plus the other parts above.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

10 Shock / Strut parts for the 2023 Dodge Durango come from 2 brands — MOPAR and FCS. The "Popular" part is FCS 355065L.

This table covers the Shock / Strut bellows. Read more

One part is listed for the 2023 Dodge Durango — KYB SB174.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Shock / Strut Mount parts are listed for the 2023 Dodge Durango, from MOPAR, DEA / MARMON RIDE CONTROL, KYB and 1 other brand. KYB SM5769 carries the "Popular" badge.

The Daily Driver section: 6 options from MOPAR, KYB and MONROE. KYB SM5769 is listed in this group.

Economy: 2 parts, from DEA / MARMON RIDE CONTROL. A representative part number is DEA / MARMON RIDE CONTROL 4713943.

This group includes KYB SM5769, MONROE 902053 and MOPAR 68330541AA and the remaining parts above.

This table covers the Shock Dust covers. Read more

3 Shock Dust Cover parts for the 2023 Dodge Durango come from MOPAR.

This group includes MOPAR 5181802AA, MOPAR 68029522AC and MOPAR 68029592AD.

This table covers the Subframe bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Subframe Bushing parts for the 2023 Dodge Durango come from DORMAN.

Part numbers include DORMAN 523547 and DORMAN 523029.

This table covers the Sway Bar assemblies. Read more

5 Sway Bar Assembly parts for the 2023 Dodge Durango come from MOPAR. The "Popular" part is MOPAR 68252205AD.

Listed part numbers: MOPAR 68252205AD, MOPAR 68253186AA and MOPAR 68252204AD, plus the other parts above.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DORMAN 928585.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

21 Sway Bar Link parts for the 2023 Dodge Durango come from 7 brands — MEVOTECH, DORMAN, MOPAR and 4 other brands. The "Popular" part is MEVOTECH MS258139.

Daily Driver: 13 parts, from MEVOTECH, DORMAN, MOPAR and 2 other brands. A representative part number is MEVOTECH MS258139.

The Economy section: 5 options from MEVOTECH, ULTRA-POWER and QUICK STEER. ULTRA-POWER K750887 is listed in this group.

Premium: 3 parts, from MEVOTECH. A representative part number is MEVOTECH TXMS25884.