The 1963 Dual-Ghia L6.4 has 71 engine parts with verified fitment on this page — 24 part types and 8 brands, covering the 6.3L V8 engine. Each part includes a manufacturer part number and application notes.
The engine on the 1963 Dual-Ghia L6.4 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Connecting Rod Bearing (8 parts), Valve Cover Gasket (7 parts) and Engine Kit Gasket Set (5 parts). The other 21 part types cover the remaining 51 parts.
Every part on this page is matched to the 6.3L V8 — the only engine offered in the 1963 Dual-Ghia L6.4.
The most listed brands for 1963 Dual-Ghia L6.4 engine parts are FEL-PRO (16 parts), MAHLE / CLEVITE (15 parts) and VICTOR REINZ (13 parts), plus 5 more brands. Quality grades include High Performance, Standard Replacement and Premium.
8 parts on this 1963 Dual-Ghia L6.4 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including SEALED POWER 2320CP (Connecting Rod Bearing) and FEL-PRO 2601001 (Engine Kit Gasket Set). Click any part number to see every vehicle that part fits.
Bolt Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 5459701 | 🇺🇸 US 🇨🇦 CA | 12 Point Bolt Head | View on Amazon |
This table covers the Bolt kits.
This group shows a single part: ARP 5459701.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER | 1453M | 🇺🇸 US | Babbitt StyleFull Round Design | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: SEALED POWER 1453M.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | CR806HPND | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | CR806HPNDX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | CR806XPND | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR806XPNDX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR806XPNDCX | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Popular | 2320CP | 🇺🇸 US | View on Amazon | |
| SEALED POWER Popular | 82320CP | 🇺🇸 US | Set | View on Amazon |
| KING ENGINE BEARINGS | CR806AM | 🇺🇸 US | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
8 Connecting Rod Bearing parts for the 1963 Dual-Ghia L6.4 come from 2 brands — KING ENGINE BEARINGS and SEALED POWER. The "Popular" part is SEALED POWER 2320CP.
The High Performance section lists 5 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR806HPND is listed in this group.
In the Standard Replacement grade, SEALED POWER and KING ENGINE BEARINGS supply 3 parts: built to original-equipment specification. A representative part number is SEALED POWER 2320CP.
Listed part numbers: SEALED POWER 2320CP, KING ENGINE BEARINGS CR806HPND and KING ENGINE BEARINGS CR806HPNDX, plus the other parts above.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB555HP | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | MB555HPX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB555AM | 🇺🇸 US | SetBimetal (Aluminum Base) | View on Amazon |
| SEALED POWER | 4094M | 🇺🇸 US | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Crankshaft Main Bearing parts are listed for the 1963 Dual-Ghia L6.4, from KING ENGINE BEARINGS and SEALED POWER.
High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB555HP.
The Standard Replacement section: 2 options from KING ENGINE BEARINGS and SEALED POWER. KING ENGINE BEARINGS MB555AM is listed in this group.
This group includes KING ENGINE BEARINGS MB555HP, KING ENGINE BEARINGS MB555HPX and KING ENGINE BEARINGS MB555AM and the remaining parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | BS40240 | 🇺🇸 US | Rubber | View on Amazon |
| MAHLE / CLEVITE | JV604 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts are listed for the 1963 Dual-Ghia L6.4, from FEL-PRO and MAHLE / CLEVITE.
Part numbers include FEL-PRO BS40240 and MAHLE / CLEVITE JV604.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1453606 | 🇺🇸 US 🇨🇦 CA | SetHex Bolt Head | View on Amazon |
| ARP | 4453706 | 🇺🇸 US 🇨🇦 CA | Set12 Point Bolt Head | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 1963 Dual-Ghia L6.4 come from ARP.
Listed part numbers: ARP 1453606 and ARP 4453706.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 8519PT1 | 🇺🇸 US | Permatorque | View on Amazon |
| MAHLE / CLEVITE | 3464VC | 🇺🇸 US | Graphite | View on Amazon |
| VICTOR REINZ | 611033200 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts for the 1963 Dual-Ghia L6.4 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO 8519PT1, MAHLE / CLEVITE 3464VC and VICTOR REINZ 611033200.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS7891PT11 | 🇺🇸 US | Exhaust Manifold Gasket(s) Not IncludedIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE | HS3464VC | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021032301 | 🇺🇸 US | with 6 Bolt Valve Cover | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 1963 Dual-Ghia L6.4 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO HS7891PT11, MAHLE / CLEVITE HS3464VC and VICTOR REINZ 021032301.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 55153 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711638300 | 🇺🇸 US | View on Amazon |
This table covers the Cylinder Head Spacer shims.
2 Cylinder Head Spacer Shim parts for the 1963 Dual-Ghia L6.4 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
This group includes MAHLE / CLEVITE 55153 and VICTOR REINZ 711638300.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | 2601001 | 🇺🇸 US | Does Not Include Intake Manifold Gasket(S) | View on Amazon |
| ENGINE PRO | 311010MLS | 🇺🇸 US | 383, 400, 426 Wedge, 440 Engines | View on Amazon |
| FEL-PRO | FS7891PT11 | 🇺🇸 US | Overhaul SetDoes Not Include Intake Manifold Gaskets | View on Amazon |
| FEL-PRO | FS7891PT | 🇺🇸 US | Overhaul SetDoes Not Include Intake Manifold Gaskets | View on Amazon |
| VICTOR REINZ | 011002401 | 🇺🇸 US | Gasket Setwith 6 Bolt Valve Cover | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Engine Kit Gasket Set parts for the 1963 Dual-Ghia L6.4 come from 3 brands — FEL-PRO, ENGINE PRO and VICTOR REINZ. The "Popular" part is FEL-PRO 2601001.
Part numbers include FEL-PRO 2601001, ENGINE PRO 311010MLS and FEL-PRO FS7891PT11, among others listed above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 2402501 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Harmonic Balancer bolts.
One part is listed for the 1963 Dual-Ghia L6.4 — ARP 2402501.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1442001 | 🇺🇸 US 🇨🇦 CA | Hex Bolt Head | View on Amazon |
This table covers the Intake Manifold bolts.
This group shows a single part: ARP 1442001.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | MS90175 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO | MS96007 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | MS19969 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE | MS15924 | 🇺🇸 US | Beaded Steel | View on Amazon |
| VICTOR REINZ | 111000501 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts for the 1963 Dual-Ghia L6.4 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO MS90175.
Part numbers include FEL-PRO MS90175, FEL-PRO MS96007 and MAHLE / CLEVITE MS19969, among others listed above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70822 | 🇺🇸 US | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| MAHLE / CLEVITE | 2051 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 711346200 | 🇺🇸 US | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Drain Plug Gasket parts for the 1963 Dual-Ghia L6.4 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | OS11729C1 | 🇺🇸 US | High Performance engine with Windage tray requires 2 Oil Pan sets1 Piece Design | View on Amazon |
| ENGINE PRO | 317345WT | 🇺🇸 US | Stroker Crankshafts up To 4.150 Inch Stroke | View on Amazon |
| MAHLE / CLEVITE | OS31416 | 🇺🇸 US | Cork-RubberOil Pan Gasket Material: Cork-Rubber | View on Amazon |
| MAHLE / CLEVITE | OS31416TC | 🇺🇸 US | Cork with Metal Carrier | View on Amazon |
| VICTOR REINZ | 101018801 | 🇺🇸 US | Cork Rubber | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts are listed for the 1963 Dual-Ghia L6.4, from MAHLE / CLEVITE, FEL-PRO, ENGINE PRO and 1 other brand. FEL-PRO OS11729C1 carries the "Popular" badge.
Listed part numbers: FEL-PRO OS11729C1, ENGINE PRO 317345WT and MAHLE / CLEVITE OS31416, plus the other parts above.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 3122 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711456300 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts for the 1963 Dual-Ghia L6.4 come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO 3122 and VICTOR REINZ 711456300.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B45558 | 🇺🇸 US | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE B45558.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER | 366AP | 🇺🇸 US | Flat HeadCast Iron | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
This group shows a single part: SEALED POWER 366AP.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Popular | E233K | 🇺🇸 US | PremiumRing Groove Widths: 5/64in, 5/64in, 3/16in | View on Amazon |
| HASTINGS MANUFACTURING | 2M683S | 🇺🇸 US | Plasma Moly Top Ring1 Cylinder Set | View on Amazon |
| HASTINGS MANUFACTURING | 2M683 | 🇺🇸 US | Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING | 683 | 🇺🇸 US | Full SetTop Ring Surface Treatment: Phosphate | View on Amazon |
| SEALED POWER | E233X | 🇺🇸 US | Ring Groove Widths: 5/64in, 5/64in, 3/16inSet | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
5 Piston Ring parts for the 1963 Dual-Ghia L6.4 come from 2 brands — HASTINGS MANUFACTURING and SEALED POWER. The "Popular" part is SEALED POWER E233K.
In the Premium grade, HASTINGS MANUFACTURING and SEALED POWER supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER E233K.
Standard Replacement: 2 parts, from HASTINGS MANUFACTURING and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 683.
This group includes SEALED POWER E233K, HASTINGS MANUFACTURING 2M683S and HASTINGS MANUFACTURING 2M683 and the remaining parts above.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | TCS124602 | 🇺🇸 US | Water Pump Gasket Included | View on Amazon |
| MAHLE / CLEVITE | T18750 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE | JV834 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 151025001 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Timing Cover Gasket parts are listed for the 1963 Dual-Ghia L6.4, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO TCS124602, MAHLE / CLEVITE T18750 and MAHLE / CLEVITE JV834 and the remaining parts above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 64573 | 🇺🇸 US | Rubber | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1963 Dual-Ghia L6.4 — MAHLE / CLEVITE 64573.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | VS13379 | 🇺🇸 US | Cork | View on Amazon |
| FEL-PRO Popular | VS50145R | 🇺🇸 US | High Temperature DesignRubber Coated Fiber | View on Amazon |
| FEL-PRO | VS11703C | 🇺🇸 US | Includes Valve Cover GrommetsCork | View on Amazon |
| MAHLE / CLEVITE | VS38281 | 🇺🇸 US | Cork-RubberIncludes Grommets | View on Amazon |
| VICTOR REINZ | 151052101 | 🇺🇸 US | Improved DesignSet | View on Amazon |
| VICTOR REINZ | 151059201 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 151052201 | 🇺🇸 US | SetHigh Temperature Design | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts are listed for the 1963 Dual-Ghia L6.4, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO VS13379 carries the "Popular" badge.
Listed part numbers: FEL-PRO VS13379, FEL-PRO VS50145R and FEL-PRO VS11703C, plus the other parts above.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER | 24518751 | 🇺🇸 US | ExhaustLOC: EXH. | View on Amazon |
This table covers the Valve seats.
This group shows a single part: SEALED POWER 24518751.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | SS12419 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | SS45343 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
| VICTOR REINZ | 121007001 | 🇺🇸 US | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts are listed for the 1963 Dual-Ghia L6.4, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO SS12419, MAHLE / CLEVITE SS45343 and VICTOR REINZ 121007001.
Buying Engine Parts for a 1963 Dual-Ghia L6.4
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 6.3L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Connecting Rod Bearing and Valve Cover Gasket .
Frequently Asked Questions
How many engine parts fit the 1963 Dual-Ghia L6.4?
Our catalog currently lists 71 engine parts for the 1963 Dual-Ghia L6.4 across 24 subcategories and 8 brands, covering the 6.3L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1963 Dual-Ghia L6.4?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1963 Dual-Ghia L6.4 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1963 Dual-Ghia L6.4?
Every part on this page is matched to the 6.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1963 Dual-Ghia L6.4
Engine Parts for Other Dual-Ghia L6.4 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.