1958 Edsel Bermuda Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 1958 Edsel Bermuda — MELLING SYB8.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Camshaft Bearing parts are listed for the 1958 Edsel Bermuda, from DURA-BOND and KING ENGINE BEARINGS.

Part numbers include DURA-BOND F33, DURA-BOND FP33 and DURA-BOND FP33T, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1958 Edsel Bermuda — KING ENGINE BEARINGS CR809AM.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB559AM.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 1958 Edsel Bermuda come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS88187, NATIONAL 99187 and SCHAEFFLER SR3506, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 1958 Edsel Bermuda come from 6 brands — FEL-PRO, MAHLE / CLEVITE, BCA and 3 other brands. The "Popular" part is FEL-PRO BS30138.

Part numbers include FEL-PRO BS30138, MAHLE / CLEVITE JV707P and BCA NS350936, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 1958 Edsel Bermuda, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 8554PT, MAHLE / CLEVITE 3389 and VICTOR REINZ 611032600.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1958 Edsel Bermuda, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO HS8554PT, MAHLE / CLEVITE HS3389VJ and VICTOR REINZ 021031801.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1958 Edsel Bermuda, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 8554SP and VICTOR REINZ 711383000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 1958 Edsel Bermuda, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 2601035, FEL-PRO FS8554PT and MAHLE / CLEVITE 953359, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 1958 Edsel Bermuda come from 2 brands — MAHLE / CLEVITE and MELLING.

Part numbers include MAHLE / CLEVITE 2111939 and MELLING V1242.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies both parts for the 1958 Edsel Bermuda.

Part numbers include ENGINE PRO PB1111ST and ENGINE PRO PB1111SS.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

4 Harmonic Balancer Repair Sleeve parts for the 1958 Edsel Bermuda come from 4 brands — BCA, MAHLE / CLEVITE, NATIONAL and 1 other brand.

Part numbers include BCA NS88187, MAHLE / CLEVITE A2262 and NATIONAL 88187, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1958 Edsel Bermuda, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS90145, MAHLE / CLEVITE MS15166X and VICTOR REINZ 111013701.

This table covers the drain plugs in the oil pan. Read more

This group shows a single part: DORMAN 090005.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1958 Edsel Bermuda, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 1958 Edsel Bermuda come from 7 brands — WIX, FRAM, CHAMP / LUBER-FINER and 4 other brands. The "Popular" part is WIX 51515XP.

The Economy section lists 4 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. CHAMP / LUBER-FINER PH8A is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51515XP is listed in this group.

In the Standard Replacement grade, WIX, ACDELCO and FRAM supply 3 parts: built to original-equipment specification. A representative part number is WIX 51515.

Listed part numbers: WIX 51515XP, CHAMP / LUBER-FINER PH8A and FVP R1515, plus the other parts above.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 1958 Edsel Bermuda — FEL-PRO 70135.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1958 Edsel Bermuda — VICTOR REINZ 711387600.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 1958 Edsel Bermuda come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO OS11701D.

This group includes FEL-PRO OS11701D, FEL-PRO OS11701C and MAHLE / CLEVITE OS30764 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

7 Oil Pump parts for the 1958 Edsel Bermuda come from 3 brands — MELLING, SEALED POWER and SKP. The "Popular" part is MELLING M57HV.

The Economy section: 1 option from SKP. SKP SKPM57 is listed in this group.

The High Volume / Pressure section lists 4 options from MELLING and SEALED POWER — grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. MELLING M57HV is listed in this group.

Standard Replacement: 2 parts, from MELLING and SEALED POWER. A representative part number is MELLING M57.

Listed part numbers: MELLING M57HV, SKP SKPM57 and MELLING M57HP, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 1958 Edsel Bermuda, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 11792 and VICTOR REINZ 711451000.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Pickup Tube Gasket parts are listed for the 1958 Edsel Bermuda, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 72516 and VICTOR REINZ 711350300.

This table covers the Oil Pump shafts. Read more

2 Oil Pump Shaft parts for the 1958 Edsel Bermuda come from 2 brands — MELLING and SEALED POWER.

This group includes MELLING IS60 and SEALED POWER 22461114.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts are listed for the 1958 Edsel Bermuda, from SEALED POWER, HASTINGS MANUFACTURING and MAHLE / CLEVITE. SEALED POWER E180K carries the "Popular" badge.

The Premium section lists 3 options from SEALED POWER, HASTINGS MANUFACTURING and MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER E180K is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING, MAHLE / CLEVITE and SEALED POWER. HASTINGS MANUFACTURING 574 is listed in this group.

This group includes SEALED POWER E180K, HASTINGS MANUFACTURING 2M574 and MAHLE / CLEVITE 40134CP and the remaining parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

One part is listed for the 1958 Edsel Bermuda — MELLING MPR328.

This table covers the Timing Cam sprockets. Read more

This group shows a single part: MELLING S284.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 1958 Edsel Bermuda, from CLOYES, FVP and MELLING.

Listed part numbers: CLOYES C494 and MELLING 494, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 1958 Edsel Bermuda come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE JV819, MAHLE / CLEVITE JV921 and VICTOR REINZ 151105101.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 1958 Edsel Bermuda come from 2 brands — MAHLE / CLEVITE and SKF.

This group includes MAHLE / CLEVITE 46293 and SKF 18546.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1958 Edsel Bermuda come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO VS13049R.

Part numbers include FEL-PRO VS13049R, FEL-PRO VS13049C and MAHLE / CLEVITE VS38308R, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts for the 1958 Edsel Bermuda come from 2 brands — MELLING and SEALED POWER.

Part numbers include MELLING JB2083 and SEALED POWER HT2083.

This table covers the Valve seats. Read more

SEALED POWER supplies both parts for the 1958 Edsel Bermuda.

Listed part numbers: SEALED POWER 24516871 and SEALED POWER 24520621.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 1958 Edsel Bermuda — MELLING VS160.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 1958 Edsel Bermuda — MELLING VL300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 1958 Edsel Bermuda come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO SS13401, MAHLE / CLEVITE SS45390 and VICTOR REINZ 121007201.