1958 Edsel Citation Engine Parts

Engine:
6.7L 410cid V8

The 1958 Edsel Citation has 72 engine parts with verified fitment on this page — 30 part types and 23 brands, covering the 6.7L 410cid V8 engine. Each part includes a manufacturer part number and application notes.

The engine on the 1958 Edsel Citation covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (12 parts), Crankshaft Seal (5 parts) and Crankshaft Repair Sleeve (4 parts). The other 27 part types cover the remaining 51 parts.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
SEALED POWER 2305CP
🇺🇸 US
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
SEALED POWER 4130M
🇺🇸 US
Set
Fitment notes — SEALED POWER 4130M
Set
Double Locking Lip Type Lower Half Main Bearings
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA NS88187
🇺🇸 US
Front
View on
Amazon
NATIONAL 99187
🇺🇸 US
FrontStandard Size Sleeve
View on
Amazon
SCHAEFFLER SR3506
🇺🇸 US
0.531 In Width1.875 In Inside Diameter
View on
Amazon
WJB / INMOTION PARTS WS99187
🇺🇸 US
FrontStandard Size Sleeve
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular 2942
🇺🇸 US
Front
View on
Amazon
BCA NS2942
🇺🇸 US
Front
View on
Amazon
FEL-PRO BS117623
🇺🇸 US
Rope Type
Fitment notes — FEL-PRO BS117623
Rope Type
Rear
View on
Amazon
SCHAEFFLER SS2894
🇺🇸 US
FrontLonglife
Fitment notes — SCHAEFFLER SS2894
FrontLonglife7.9502 mm Width65.1764 mm Outside Diameter
View on
Amazon
WJB / INMOTION PARTS WS2942
🇺🇸 US
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ 611114300
🇺🇸 US
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Exhaust Valve

Brand Part Number Markets Notes Buy
QUALCAST 101242
🇺🇸 US
1.559 Head DIA. Exc. CJ & SCJ.
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand Part Number Markets Notes Buy
QUALCAST 9719
🇺🇸 US
Steel
View on
Amazon
QUALCAST 9719B
🇺🇸 US
Brass
View on
Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Harmonic Balancer

Brand Part Number Markets Notes Buy
ENGINE PRO PB1111ST
🇺🇸 US
High Performance Street Series Damper 7.10" OD
View on
Amazon
ENGINE PRO PB1111SS
🇺🇸 US
SFI Race Series Damper 7.10" Outside Diameter
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Repair Sleeve

Brand Part Number Markets Notes Buy
BCA NS88187
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE A2262
🇺🇸 US
Nickel Plated Formed Steel
Fitment notes — MAHLE / CLEVITE A2262
Nickel Plated Formed Steel
0.013 IN Thickness
View on
Amazon
NATIONAL 88187
🇺🇸 US
View on
Amazon
WJB / INMOTION PARTS WS88187
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO MS9466B
🇺🇸 US
Set
Fitment notes — FEL-PRO MS9466B
Set
Lower
View on
Amazon
MAHLE / CLEVITE MS15079
🇺🇸 US
Paper
View on
Amazon
VICTOR REINZ 111044101
🇺🇸 US
Set
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN 090005
🇺🇸 US 🇨🇦 CA
1/2" x 20 Thread
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 70822
🇺🇸 US
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer
Fitment notes — FEL-PRO 70822
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat WasherPlastic
View on
Amazon
VICTOR REINZ 711346200
🇺🇸 US
0.500 IN Inside Diameter
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
CHAMP / LUBER-FINER PH8A
🇺🇸 US
Spin-On
Fitment notes — CHAMP / LUBER-FINER PH8A
Spin-On
Alternate
View on
Amazon
FVP R1515
🇺🇸 US
Spin-On Filter
View on
Amazon
PRO-TEC PXL51515
🇺🇸 US
Height: 5.197 InSpin-On Filter
View on
Amazon
PUROLATOR PBL30001
🇺🇸 US
Bypass Relief Valve Setting: 8-16 PSIClass: D
View on
Amazon
VARIOUS MFR PG1A
🇺🇸 US 🇨🇦 CA
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Popular 51515XP
🇺🇸 US
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX 51515XP
XP Extreme DutyBest for Synthetic Motor OilsSpin-On Filter
View on
Amazon
FRAM TG8A
🇺🇸 US
Tough GuardUse if Spin-On Kit was Installed
Fitment notes — FRAM TG8A
Tough GuardUse if Spin-On Kit was InstalledSpin-On Oil Filter
View on
Amazon
MOBIL M1301A
🇺🇸 US
Extended PerformanceBypass Relief Valve Setting: 8-16
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular FL1A
🇺🇸 US
View on
Amazon
WIX Popular 51515
🇺🇸 US 🇨🇦 CA
Bypass Relief Valve Setting: 8-11 PSIHeight: 5.197 In
Fitment notes — WIX 51515
Bypass Relief Valve Setting: 8-11 PSIHeight: 5.197 InSpin-On Filter
View on
Amazon
ACDELCO PFL400A
🇺🇸 US 🇨🇦 CA
Gold / ProfessionalSpin-On
View on
Amazon
FRAM PH8A
🇺🇸 US
Extra GuardUse if Spin-On Kit was Installed
Fitment notes — FRAM PH8A
Extra GuardUse if Spin-On Kit was InstalledSpin-On Oil FilterIncludes Gasket
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO OS11677C
🇺🇸 US
Cork
View on
Amazon
MAHLE / CLEVITE OS32548
🇺🇸 US
Cork-Rubber
View on
Amazon
VICTOR REINZ 101011201
🇺🇸 US
Improved DesignCork
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 11792
🇺🇸 US
View on
Amazon
VICTOR REINZ 711451000
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Pickup Tube Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 72516
🇺🇸 US
View on
Amazon
VICTOR REINZ 711350300
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Push Rod

Brand Part Number Markets Notes Buy
QUALCAST 745311
🇺🇸 US
9.620 Length
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Push Rod Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE PS38993
🇺🇸 US
Paper
View on
Amazon
VICTOR REINZ 181005701
🇺🇸 US
View on
Amazon

This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Rocker Arm

Brand Part Number Markets Notes Buy
QUALCAST 402859
🇺🇸 US
Rocker Arm. Cast
View on
Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Rocker Arm Shaft

Brand Part Number Markets Notes Buy
QUALCAST 422641
🇺🇸 US
Rocker Shaft, with Hydraulic Lifter
View on
Amazon

This table covers the Rocker Arm shafts.

Timing Chain

Brand Part Number Markets Notes Buy
CLOYES C493
🇺🇸 US
View on
Amazon
FVP C493
🇺🇸 US
CenterOE Replacement
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ 151105001
🇺🇸 US
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 46293
🇺🇸 US
Rubber
Fitment notes — MAHLE / CLEVITE 46293
Rubber
Front Entry
View on
Amazon
SKF 18546
🇺🇸 US
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand Part Number Markets Notes Buy
CLOYES S283
🇺🇸 US
Outer
View on
Amazon
FVP S283
🇺🇸 US
Outer
View on
Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO VS12433
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE VS38280
🇺🇸 US
Cork-Rubber
View on
Amazon
VICTOR REINZ 151042801
🇺🇸 US
Set
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Guide

Brand Part Number Markets Notes Buy
QUALCAST 309108
🇺🇸 US
2.375 Overall Length. Spiral 0.374 Inside Diameter
View on
Amazon
QUALCAST 306108
🇺🇸 US
2.375 OAL. Plain 0.374 I.D.
View on
Amazon
QUALCAST 309298
🇺🇸 US
Exhaust2.375 OAL. 0.373 Spiral I.D.
View on
Amazon
QUALCAST 307298
🇺🇸 US
Exhaust2.375 Overall Length. 0.373 Plain Inside Diameter
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Brand Part Number Markets Notes Buy
QUALCAST 362083
🇺🇸 US
Hydraulic
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Seat

Brand Part Number Markets Notes Buy
QUALCAST 2016871
🇺🇸 US
INSERT
Fitment notes — QUALCAST 2016871
INSERT
Exhaust1-13/32 I.D. 1-11/16 O.D. 1/4 Depth
View on
Amazon
QUALCAST 2020621
🇺🇸 US
INSERT
Fitment notes — QUALCAST 2020621
INSERT
Intake1-13/16T I.D. 2-1/16 O.D. 1/4 Depth.
View on
Amazon

This table covers the Valve seats.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
QUALCAST 34613
🇺🇸 US
1 Groove. Heat Treated
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
QUALCAST 3892125
🇺🇸 US
Guide Inside Diameter (mm): 14.61Polyacrylic. 2-Ring.
View on
Amazon
QUALCAST 3892115
🇺🇸 US
Nitrile2-Ring
View on
Amazon
QUALCAST 3890525
🇺🇸 US
PolyacrylicUmbrella
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1958 Edsel Citation

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 6.7L 410cid V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 1958 Edsel Citation?

Our catalog currently lists 72 engine parts for the 1958 Edsel Citation across 30 subcategories and 23 brands, covering the 6.7L 410cid V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1958 Edsel Citation?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1958 Edsel Citation was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1958 Edsel Citation?

Every part on this page is matched to the 6.7L 410cid V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1958 Edsel Citation

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.