1958 Edsel Roundup Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: MELLING SYB8.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Camshaft Bearing parts for the 1958 Edsel Roundup come from 2 brands — DURA-BOND and KING ENGINE BEARINGS.

Part numbers include DURA-BOND F33, DURA-BOND FP33 and DURA-BOND FP33T, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR809AM.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1958 Edsel Roundup — KING ENGINE BEARINGS MB559AM.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 1958 Edsel Roundup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS88187, NATIONAL 99187 and SCHAEFFLER SR3506, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 1958 Edsel Roundup, from FEL-PRO, MAHLE / CLEVITE, BCA and 3 other brands. FEL-PRO BS30138 carries the "Popular" badge.

Part numbers include FEL-PRO BS30138, MAHLE / CLEVITE JV707P and BCA NS350936, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 1958 Edsel Roundup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 8554PT, MAHLE / CLEVITE 3389 and VICTOR REINZ 611032600.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 1958 Edsel Roundup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO HS8554PT, MAHLE / CLEVITE HS3389VJ and VICTOR REINZ 021031801.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1958 Edsel Roundup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 8554SP and VICTOR REINZ 711383000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1958 Edsel Roundup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO 2601035, FEL-PRO FS8554PT and MAHLE / CLEVITE 953359, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 1958 Edsel Roundup, from MAHLE / CLEVITE and MELLING.

Listed part numbers: MAHLE / CLEVITE 2111939 and MELLING V1242.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 1958 Edsel Roundup come from ENGINE PRO.

This group includes ENGINE PRO PB1111ST and ENGINE PRO PB1111SS.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

4 Harmonic Balancer Repair Sleeve parts are listed for the 1958 Edsel Roundup, from BCA, MAHLE / CLEVITE, NATIONAL and 1 other brand.

Listed part numbers: BCA NS88187, MAHLE / CLEVITE A2262 and NATIONAL 88187, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 1958 Edsel Roundup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS90145, MAHLE / CLEVITE MS15166X and VICTOR REINZ 111013701.

This table covers the drain plugs in the oil pan. Read more

One part is listed for the 1958 Edsel Roundup — DORMAN 090005.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1958 Edsel Roundup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts are listed for the 1958 Edsel Roundup, from WIX, FRAM, CHAMP / LUBER-FINER and 4 other brands. WIX 51515XP carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, FVP, PRO-TEC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH8A.

In the High Performance / Heavy Duty grade, WIX and FRAM supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51515XP.

The Standard Replacement section lists 3 options from WIX, ACDELCO and FRAM — built to original-equipment specification. WIX 51515 is listed in this group.

Part numbers include WIX 51515XP, CHAMP / LUBER-FINER PH8A and FVP R1515, among others listed above.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: FEL-PRO 70135.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 711387600.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 1958 Edsel Roundup, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO OS11701D carries the "Popular" badge.

Part numbers include FEL-PRO OS11701D, FEL-PRO OS11701C and MAHLE / CLEVITE OS30764, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

7 Oil Pump parts are listed for the 1958 Edsel Roundup, from MELLING, SEALED POWER and SKP. MELLING M57HV carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKPM57.

In the High Volume / Pressure grade, MELLING and SEALED POWER supply 4 parts: grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. A representative part number is MELLING M57HV.

The Standard Replacement section: 2 options from MELLING and SEALED POWER. MELLING M57 is listed in this group.

Part numbers include MELLING M57HV, SKP SKPM57 and MELLING M57HP, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 1958 Edsel Roundup come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 11792 and VICTOR REINZ 711451000.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Pickup Tube Gasket parts for the 1958 Edsel Roundup come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 72516 and VICTOR REINZ 711350300.

This table covers the Oil Pump shafts. Read more

2 Oil Pump Shaft parts are listed for the 1958 Edsel Roundup, from MELLING and SEALED POWER.

This group includes MELLING IS60 and SEALED POWER 22461114.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts for the 1958 Edsel Roundup come from 3 brands — SEALED POWER, HASTINGS MANUFACTURING and MAHLE / CLEVITE. The "Popular" part is SEALED POWER E180K.

In the Premium grade, SEALED POWER, HASTINGS MANUFACTURING and MAHLE / CLEVITE supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER E180K.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING, MAHLE / CLEVITE and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 574.

Listed part numbers: SEALED POWER E180K, HASTINGS MANUFACTURING 2M574 and MAHLE / CLEVITE 40134CP, plus the other parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: MELLING MPR328.

This table covers the Rocker Arm shafts. Read more

One part is listed for the 1958 Edsel Roundup — MELLING MRS641.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 1958 Edsel Roundup — MELLING S284.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 1958 Edsel Roundup come from 3 brands — CLOYES, FVP and MELLING.

Listed part numbers: CLOYES C494 and MELLING 494, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts are listed for the 1958 Edsel Roundup, from MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE JV819, MAHLE / CLEVITE JV921 and VICTOR REINZ 151105101.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 1958 Edsel Roundup, from MAHLE / CLEVITE and SKF.

Listed part numbers: MAHLE / CLEVITE 46293 and SKF 18546.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 1958 Edsel Roundup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO VS13049R carries the "Popular" badge.

Listed part numbers: FEL-PRO VS13049R, FEL-PRO VS13049C and MAHLE / CLEVITE VS38308R, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts are listed for the 1958 Edsel Roundup, from MELLING and SEALED POWER.

This group includes MELLING JB2083 and SEALED POWER HT2083.

This table covers the Valve seats. Read more

2 Valve Seat parts for the 1958 Edsel Roundup come from SEALED POWER.

This group includes SEALED POWER 24516871 and SEALED POWER 24520621.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: MELLING VS160.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts are listed for the 1958 Edsel Roundup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO SS13401, MAHLE / CLEVITE SS45390 and VICTOR REINZ 121007201.