1993 Excalibur Limited Engine Parts

This table covers the Bolt kits. Read more

4 Bolt Kit parts for the 1993 Excalibur Limited come from ARP.

This group includes ARP 5349701, ARP 5349801 and ARP 5349601 and the remaining parts above.

This table covers the Camshaft bolts. Read more

One part is listed for the 1993 Excalibur Limited — ARP 1341001.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1993 Excalibur Limited come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR807XPN.

The High Performance section lists 6 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR807XPN is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 3 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR807SI.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 1993 Excalibur Limited — ARP 1346003.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 1993 Excalibur Limited come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes APEX ACS3067, FEL-PRO CS9966 and MAHLE / CLEVITE CS5922 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 7 Crankshaft Main Bearing parts for the 1993 Excalibur Limited. KING ENGINE BEARINGS MB557XP carries the "Popular" badge.

High Performance: 6 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB557XP.

The Standard Replacement section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB557SI is listed in this group.

Part numbers include KING ENGINE BEARINGS MB557XP, KING ENGINE BEARINGS MB557HP and KING ENGINE BEARINGS MB557HPX, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

2 Crankshaft Main Bearing Cap Bolt parts for the 1993 Excalibur Limited come from ARP.

This group includes ARP 1345401 and ARP 1345601.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 1993 Excalibur Limited, from WJB / INMOTION PARTS, NATIONAL, BCA and 4 other brands. NATIONAL 99176 carries the "Popular" badge.

Part numbers include NATIONAL 99176, WJB / INMOTION PARTS WS99176 and BCA NS99364, among others listed above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 1993 Excalibur Limited — VICTOR REINZ 711454000.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Crankshaft Seal parts are listed for the 1993 Excalibur Limited, from NATIONAL, WJB / INMOTION PARTS, FEL-PRO and 5 other brands. FEL-PRO BS40520 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 1993 Excalibur Limited come from 5 brands — ARP, FEL-PRO, APEX and 2 other brands. The "Popular" part is ARP 1343601.

This group includes ARP 1343601, FEL-PRO ES72856 and APEX AHB322 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 1993 Excalibur Limited come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AHG375, FEL-PRO 9966PT and MAHLE / CLEVITE 5922, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 1993 Excalibur Limited come from 4 brands — FEL-PRO, APEX, ENGINE PRO and 1 other brand. The "Popular" part is APEX AHS3075.

This group includes APEX AHS3075, FEL-PRO HS9966PT2 and ENGINE PRO 369966PT2 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1993 Excalibur Limited come from ENGINE PRO.

Part numbers include ENGINE PRO 311003 and ENGINE PRO 311003MLS.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1993 Excalibur Limited come from ENGINE PRO.

Part numbers include ENGINE PRO PB2221ST, ENGINE PRO PB1012ST and ENGINE PRO PB2221SS, among others listed above.

This table covers the Harmonic Balancer bolts. Read more

ARP supplies the 4 Harmonic Balancer Bolt parts for the 1993 Excalibur Limited.

Part numbers include ARP 4306801, ARP 2002807 and ARP 1342501, among others listed above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

6 Harmonic Balancer Repair Sleeve parts are listed for the 1993 Excalibur Limited, from NATIONAL, MAHLE / CLEVITE, BCA and 2 other brands. MAHLE / CLEVITE A228 carries the "Popular" badge.

This group includes MAHLE / CLEVITE A228, NATIONAL 88176 and BCA NS5000 and the remaining parts above.

This table covers the Intake Manifold bolts. Read more

4 Intake Manifold Bolt parts for the 1993 Excalibur Limited come from ARP.

Listed part numbers: ARP 1342001, ARP 1342101 and ARP 4342001, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 1993 Excalibur Limited come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO MS95580, MAHLE / CLEVITE MS16134 and VICTOR REINZ 111060201.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts for the 1993 Excalibur Limited come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO ES70687 and VICTOR REINZ 131001601.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 1993 Excalibur Limited come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.

This table covers the Oil Pan bolts. Read more

ARP supplies the 5 Oil Pan Bolt parts for the 1993 Excalibur Limited. ARP 2341802 carries the "Popular" badge.

This group includes ARP 2341802, ARP 4341802 and ARP 2341901 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts are listed for the 1993 Excalibur Limited, from APEX, FEL-PRO, ENGINE PRO and 3 other brands. APEX AOP323 carries the "Popular" badge.

Part numbers include APEX AOP323, FEL-PRO OS34500R and ENGINE PRO 311886, among others listed above.

This table covers the Oil Pump shafts. Read more

One part is listed for the 1993 Excalibur Limited — ARP 1347901.

This table covers the Oil Pump Shaft Guide retainers. Read more

3 Oil Pump Shaft Guide / Retainer parts for the 1993 Excalibur Limited come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 72665, MAHLE / CLEVITE H31354 and VICTOR REINZ 711403800.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: SILV-O-LITE 3471H.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: MAHLE / CLEVITE 40451.

This table covers the Rocker Arm studs. Read more

ARP supplies the 4 Rocker Arm Stud parts for the 1993 Excalibur Limited.

This group includes ARP 1347103, ARP 1347104 and ARP 1347101 and the remaining parts above.

This table covers the Timing Camshaft Gear bolts. Read more

This group shows a single part: ARP 2341001.