The 1958 Facel Vega Excellence has 19 engine parts with verified fitment on this page — 9 part types and 3 brands, covering both the 5.8L V8 and the 6.4L V8. Each part includes a manufacturer part number and application notes.
On the 1958 Facel Vega Excellence, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Engine Kit Gasket Set (3 parts), Intake Manifold Gasket (3 parts) and Oil Pan Gasket (3 parts). The other 6 part types cover the remaining 10 parts.
The 1958 Facel Vega Excellence was sold with both the 5.8L V8 and the 6.4L V8. 14 parts fit every engine; the other 5 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1958 Facel Vega Excellence engine parts are VICTOR REINZ (8 parts), MAHLE / CLEVITE (6 parts) and FEL-PRO (5 parts).
Each part number listed for the 1958 Facel Vega Excellence opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.8L V8 | BS40245 | 🇺🇸 US | Rubber | View on Amazon |
| VICTOR REINZ Fits: 5.8L V8 | 191014701 | 🇺🇸 US | SetRubber | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts are listed for the 1958 Facel Vega Excellence, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO BS40245 and VICTOR REINZ 191014701.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: all 1958 Excellence engines | 55155 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ Fits: all 1958 Excellence engines | 611114100 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Cylinder Head Gasket parts for the 1958 Facel Vega Excellence come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ. Every part fits both the 5.8L V8 and the 6.4L V8.
Part numbers include MAHLE / CLEVITE 55155 and VICTOR REINZ 611114100.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1958 Excellence engines | FS7908PT4 | 🇺🇸 US | Overhaul Set | View on Amazon |
| MAHLE / CLEVITE Fits: all 1958 Excellence engines | 953769 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: all 1958 Excellence engines | 011030601 | 🇺🇸 US | with Rectangular valve covers | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts for the 1958 Facel Vega Excellence come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. Every part fits both the 5.8L V8 and the 6.4L V8.
Listed part numbers: FEL-PRO FS7908PT4, MAHLE / CLEVITE 953769 and VICTOR REINZ 011030601.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.8L V8 | MS20170 | 🇺🇸 US | Composite | View on Amazon |
| MAHLE / CLEVITE Fits: 6.4L V8 | MS20171 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ Fits: 6.4L V8 | 111098701 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts for the 1958 Facel Vega Excellence come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include MAHLE / CLEVITE MS20170, MAHLE / CLEVITE MS20171 and VICTOR REINZ 111098701.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1958 Excellence engines | OS6488C | 🇺🇸 US | Multi-Piece | View on Amazon |
| MAHLE / CLEVITE Fits: all 1958 Excellence engines | OS30518 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: all 1958 Excellence engines | 101015701 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts are listed for the 1958 Facel Vega Excellence, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. All of them fit every engine offered in the 1958 Excellence.
Listed part numbers: FEL-PRO OS6488C, MAHLE / CLEVITE OS30518 and VICTOR REINZ 101015701.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1958 Excellence engines | 3122 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: all 1958 Excellence engines | 711456300 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts for the 1958 Facel Vega Excellence come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits both the 5.8L V8 and the 6.4L V8.
This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.
Push Rod Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1958 Excellence engines | PS6361D1 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: all 1958 Excellence engines | 151101901 | 🇺🇸 US | View on Amazon |
This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Push Rod Gasket Set parts are listed for the 1958 Facel Vega Excellence, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1958 Excellence.
Listed part numbers: FEL-PRO PS6361D1 and VICTOR REINZ 151101901.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: all 1958 Excellence engines | VS38730 | 🇺🇸 US | Cork-Rubber | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 1958 Facel Vega Excellence — MAHLE / CLEVITE VS38730.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: all 1958 Excellence engines | 121007501 | 🇺🇸 US | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1958 Facel Vega Excellence — VICTOR REINZ 121007501.
Buying Engine Parts for a 1958 Facel Vega Excellence
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Engine Kit Gasket Set and Intake Manifold Gasket .
Frequently Asked Questions
How many engine parts fit the 1958 Facel Vega Excellence?
Our catalog currently lists 19 engine parts for the 1958 Facel Vega Excellence across 9 subcategories and 3 brands, covering both the 5.8L V8 and the 6.4L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1958 Facel Vega Excellence engines?
Some do. 14 parts fit every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1958 Facel Vega Excellence?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1958 Facel Vega Excellence was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1958 Facel Vega Excellence?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1958 Facel Vega Excellence
Engine Parts for Other Facel Vega Excellence Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.