1958 Facel Vega FVS Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 1958 Facel Vega FVS has 42 engine parts with verified fitment on this page — 12 part types and 7 brands, covering all 4 engine options (4.5L V8, 4.8L V8, 4.9L V8 and 5.8L V8). Each part includes a manufacturer part number and application notes.

On the 1958 Facel Vega FVS, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Crankshaft Seal (8 parts), Engine Kit Gasket Set (5 parts) and Oil Pan Gasket (5 parts). The other 9 part types cover the remaining 24 parts.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Fits: 5.8L V8 99218
🇺🇸 US
Front
View on
Amazon
SCHAEFFLER Fits: 5.8L V8 SR3515
🇺🇸 US
23.83 mm Width
View on
Amazon
WJB / INMOTION PARTS Fits: 5.8L V8 WS99218
🇺🇸 US
Front
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: all 1958 FVS engines BS40245
🇺🇸 US
Rubber
Fitment notes — FEL-PRO BS40245
Rubber
RearTwo Piece
View on
Amazon
NATIONAL Popular Fits: 5.8L V8 3103
🇺🇸 US
Front
View on
Amazon
BCA Fits: 5.8L V8 NS3103
🇺🇸 US
Front
View on
Amazon
NATIONAL Fits: 5.8L V8 5414
🇺🇸 US
RearSplit Type
View on
Amazon
SCHAEFFLER Fits: 5.8L V8 SS3145
🇺🇸 US
Front
View on
Amazon
VICTOR REINZ Fits: all 1958 FVS engines 191014701
🇺🇸 US
SetRubber
Fitment notes — VICTOR REINZ 191014701
SetRubber
Rear2 Piece
View on
Amazon
WJB / INMOTION PARTS Fits: 5.8L V8 WS3103
🇺🇸 US
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 5.8L V8 WS5414
🇺🇸 US
RearSplit Type
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 7734PT
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE Fits: 5.8L V8 55155
🇺🇸 US
Composite
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 611053900
🇺🇸 US
View on
Amazon
VICTOR REINZ Fits: 5.8L V8 611114100
🇺🇸 US
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 HS7734PT
🇺🇸 US
Includes Valve Stem Seals
View on
Amazon
MAHLE / CLEVITE Fits: 4.5L V8, 4.8L V8, 4.9L V8 HS1134TC
🇺🇸 US
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS1134TC
Includes Valve Stem Seals
with 2-Bolt Valve Covers
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 021023501
🇺🇸 US
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 FS7734PT2
🇺🇸 US
Overhaul Set
View on
Amazon
FEL-PRO Fits: 5.8L V8 FS7908PT4
🇺🇸 US
Overhaul Set
Fitment notes — FEL-PRO FS7908PT4
Overhaul Set
Rectangular valve covers
View on
Amazon
MAHLE / CLEVITE Fits: 5.8L V8 953769
🇺🇸 US
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 011006701
🇺🇸 US
View on
Amazon
VICTOR REINZ Fits: 5.8L V8 011030601
🇺🇸 US
with Rectangular valve covers
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 MS9344SH
🇺🇸 US
Set
Fitment notes — FEL-PRO MS9344SH
Set
Lowerwith 2 Bolt Valve Cover
View on
Amazon
MAHLE / CLEVITE Fits: 5.8L V8 MS20170
🇺🇸 US
Composite
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 111042301
🇺🇸 US
Set
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 OS6566C
🇺🇸 US
Cork
Fitment notes — FEL-PRO OS6566C
Cork
Straight end seals without tabs
View on
Amazon
FEL-PRO Fits: 5.8L V8 OS6488C
🇺🇸 US
Multi-Piece
View on
Amazon
MAHLE / CLEVITE Fits: 5.8L V8 OS30518
🇺🇸 US
Cork-Rubber
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 101046301
🇺🇸 US
Cork
View on
Amazon
VICTOR REINZ Fits: 5.8L V8 101015701
🇺🇸 US
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pressure Relief Valve Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: all 1958 FVS engines 3122
🇺🇸 US
View on
Amazon
VICTOR REINZ Fits: all 1958 FVS engines 711456300
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Push Rod Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 5.8L V8 PS6361D1
🇺🇸 US
View on
Amazon
VICTOR REINZ Fits: 5.8L V8 151101901
🇺🇸 US
View on
Amazon

This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 TCS65631
🇺🇸 US
Repair Sleeve Not Included
Fitment notes — FEL-PRO TCS65631
Repair Sleeve Not Included
Rectangular Timing Cover
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 151034101
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 151034101
Set
without Sleeve
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.5L V8, 4.8L V8, 4.9L V8 VS11828C
🇺🇸 US
Includes Valve Cover GrommetsCork
Fitment notes — FEL-PRO VS11828C
Includes Valve Cover GrommetsCork
with 2 Bolt Valve Cover
View on
Amazon
MAHLE / CLEVITE Fits: 4.5L V8, 4.8L V8, 4.9L V8 VS38282
🇺🇸 US
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS38282
SetMolded Rubber
with 3 Stud Valve Cover
View on
Amazon
MAHLE / CLEVITE Fits: 5.8L V8 VS38730
🇺🇸 US
Cork-Rubber
View on
Amazon
VICTOR REINZ Fits: 4.5L V8, 4.8L V8, 4.9L V8 151042501
🇺🇸 US
SetCork
Fitment notes — VICTOR REINZ 151042501
SetCorkImproved Design
Grommets Included
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
VICTOR REINZ Fits: all 1958 FVS engines 121007501
🇺🇸 US
SetContains 8 Pieces
Fitment notes — VICTOR REINZ 121007501
SetContains 8 PiecesImproved Design
Intake and ExhaustOE Style
IntakeOE Style
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1958 Facel Vega FVS

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Engine Kit Gasket Set .

Frequently Asked Questions

How many engine parts fit the 1958 Facel Vega FVS?

Our catalog currently lists 42 engine parts for the 1958 Facel Vega FVS across 12 subcategories and 7 brands, covering all 4 engine options (4.5L V8, 4.8L V8, 4.9L V8 and 5.8L V8). Each part is matched to the engine(s) it fits.

Do engine parts differ between 1958 Facel Vega FVS engines?

Some do. 5 parts fit every engine; the other 37 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 1958 Facel Vega FVS?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1958 Facel Vega FVS was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1958 Facel Vega FVS?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1958 Facel Vega FVS

Engine Parts for Other Facel Vega FVS Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.