This page lists 4 engine parts for the 1961 Fairthorpe Electrina, across 2 part types, covering both the 948cc L4 and the 998cc L4. Every part shows its brand, manufacturer part number and fitment notes.
On the 1961 Fairthorpe Electrina, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 4 listed parts are Valve Cover Gasket (3 parts) and Connecting Rod Bearing (1 part).
The 1961 Fairthorpe Electrina was sold with both the 948cc L4 and the 998cc L4. 3 parts fit every engine; the other 1 is engine-specific. Each part shows which engine(s) it fits.
3 brands supply engine parts for the 1961 Fairthorpe Electrina, led by MAHLE / CLEVITE (2 parts), FEL-PRO (1 part) and VICTOR REINZ (1 part).
Each part number listed for the 1961 Fairthorpe Electrina opens a page with every vehicle that part fits.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 948cc L4 | CB488P | 🇺🇸 US | P Series (Tri-Metal)Pair | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 1961 Fairthorpe Electrina — MAHLE / CLEVITE CB488P.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1961 Electrina engines | VS21507 | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: all 1961 Electrina engines | VS30025 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: all 1961 Electrina engines | 151043701 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Valve Cover Gasket parts for the 1961 Fairthorpe Electrina come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. Every part fits both the 948cc L4 and the 998cc L4.
Listed part numbers: FEL-PRO VS21507, MAHLE / CLEVITE VS30025 and VICTOR REINZ 151043701.
Buying Engine Parts for a 1961 Fairthorpe Electrina
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Cover Gasket and Connecting Rod Bearing .
Frequently Asked Questions
How many engine parts fit the 1961 Fairthorpe Electrina?
Our catalog currently lists 4 engine parts for the 1961 Fairthorpe Electrina across 2 subcategories and 3 brands, covering both the 948cc L4 and the 998cc L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1961 Fairthorpe Electrina engines?
Some do. 3 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1961 Fairthorpe Electrina?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1961 Fairthorpe Electrina was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1961 Fairthorpe Electrina?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1961 Fairthorpe Electrina
Engine Parts for Other Fairthorpe Electrina Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.