1949 Fargo F1B Pickup Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SEALED POWER 1010M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 1949 Fargo F1B Pickup come from SEALED POWER.

This group includes SEALED POWER 9185CP and SEALED POWER 69185CP.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1949 Fargo F1B Pickup — WJB / INMOTION PARTS WS6186.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 1949 Fargo F1B Pickup come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

This group includes FEL-PRO 7564C and MAHLE / CLEVITE 1059C.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 1949 Fargo F1B Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO HS7564C, MAHLE / CLEVITE HS1059C and VICTOR REINZ 021012401.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: FEL-PRO FS7564C2.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts for the 1949 Fargo F1B Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO MS8009B, MAHLE / CLEVITE MS18005 and VICTOR REINZ 711476800.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1949 Fargo F1B Pickup — VICTOR REINZ 711620200.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1949 Fargo F1B Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO OS4250C, MAHLE / CLEVITE OS30893 and VICTOR REINZ 101017801.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts for the 1949 Fargo F1B Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: SEALED POWER 37P.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts for the 1949 Fargo F1B Pickup come from 2 brands — HASTINGS MANUFACTURING and SEALED POWER. The "Popular" part is HASTINGS MANUFACTURING 144.

In the Premium grade, SEALED POWER supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER E108KC.

In the Standard Replacement grade, HASTINGS MANUFACTURING and SEALED POWER supply 5 parts: built to original-equipment specification. A representative part number is HASTINGS MANUFACTURING 144.

This group includes HASTINGS MANUFACTURING 144, SEALED POWER E108KC and SEALED POWER E108X and the remaining parts above.

This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1949 Fargo F1B Pickup — FEL-PRO VS4253C.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts are listed for the 1949 Fargo F1B Pickup, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO TCS41552 and VICTOR REINZ 151035801.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1949 Fargo F1B Pickup — VICTOR REINZ 151044301.

This table covers the Valve seats. Read more

This group shows a single part: SEALED POWER 24516251N.