17 Ignition parts are listed for the 1951 Fargo FO1 Pickup, in 7 part types, covering the 3.6L 218cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 1951 Fargo FO1 Pickup delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (5 parts), Spark Plug (4 parts) and Distributor Cap (2 parts). The other 4 part types cover the remaining 6 parts.
The 1951 Fargo FO1 Pickup came with a single engine, the 3.6L 218cid L6, and every part is verified against it.
6 brands supply ignition parts for the 1951 Fargo FO1 Pickup, led by WELLS (6 parts), STANDARD MOTOR PRODUCTS (5 parts) and CHAMPION (3 parts), plus 3 more brands. Quality grades include Economy, Premium and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1951 Fargo FO1 Pickup. 1 part has it: STANDARD MOTOR PRODUCTS UC14T (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 5H1099 | 🇨🇦 CA | Standard Duty | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
This group shows a single part: WELLS 5H1099.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | AL138 | 🇨🇦 CA | View on Amazon | |
| WELLS | 5D1027 | 🇨🇦 CA | Distributor # IAT | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
2 Distributor Cap parts are listed for the 1951 Fargo FO1 Pickup, from STANDARD MOTOR PRODUCTS and WELLS.
Listed part numbers: STANDARD MOTOR PRODUCTS AL138 and WELLS 5D1027.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | AL151 | 🇨🇦 CA | View on Amazon | |
| WELLS | 4R1014 | 🇨🇦 CA | Distributor # IAT | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
2 Distributor Rotor parts are listed for the 1951 Fargo FO1 Pickup, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS AL151 and WELLS 4R1014.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 4P1012 | 🇨🇦 CA | Distributor # IAT | View on Amazon |
This table covers the breaker points in a points-type distributor.
This group shows a single part: WELLS 4P1012.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC14T | 🇨🇦 CA | T-Series6 Volt | View on Amazon |
| FVP | UC14F | 🇨🇦 CA | View on Amazon | |
| HOLSTEIN | 2IGC0057 | 🇨🇦 CA | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UC14 | 🇨🇦 CA | Blue Streak6 Volt | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 5C1063 | 🇨🇦 CA | Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness. | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
5 Ignition Coil parts for the 1951 Fargo FO1 Pickup come from 4 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS UC14T.
The Economy section lists 3 options from STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN — the catalog's value-priced group. STANDARD MOTOR PRODUCTS UC14T is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS UC14.
In the Standard Replacement grade, WELLS supplies 1 part: built to original-equipment specification. A representative part number is WELLS 5C1063.
Listed part numbers: STANDARD MOTOR PRODUCTS UC14T, FVP UC14F and HOLSTEIN 2IGC0057, plus the other parts above.
Ignition Lock Cylinder
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | US12L | 🇨🇦 CA | View on Amazon | |
| WELLS | 4H1058 | 🇨🇦 CA | Used with 1S6151 Ignition Starter Switch | View on Amazon |
This table covers the lock cylinders in the ignition switch.
2 Ignition Lock Cylinder parts for the 1951 Fargo FO1 Pickup come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
Listed part numbers: STANDARD MOTOR PRODUCTS US12L and WELLS 4H1058.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | R45 | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION | 841 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION | 8411 | 🇨🇦 CA | Copper Plus | View on Amazon |
| CHAMPION | 871 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
4 Spark Plug parts are listed for the 1951 Fargo FO1 Pickup, from CHAMPION and ACDELCO.
This group includes ACDELCO R45, CHAMPION 841 and CHAMPION 8411 and the remaining parts above.
Buying Ignition Parts for a 1951 Fargo FO1 Pickup
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 3.6L 218cid L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1951 Fargo FO1 Pickup?
Our catalog currently lists 17 ignition parts for the 1951 Fargo FO1 Pickup across 7 subcategories and 6 brands, covering the 3.6L 218cid L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1951 Fargo FO1 Pickup?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1951 Fargo FO1 Pickup?
Notes on this page include pre-set gaps of 0.03", 0.035" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1951 Fargo FO1 Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1951 Fargo FO1 Pickup?
Every part on this page is matched to the 3.6L 218cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1951 Fargo FO1 Pickup
Ignition Parts for Other Fargo FO1 Pickup Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.