1952 Fargo FO1 Panel Delivery Engine Parts

Engine:
3.6L 218cid L6

32 Engine parts are listed for the 1952 Fargo FO1 Panel Delivery, in 17 part types, covering the 3.6L 218cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1952 Fargo FO1 Panel Delivery, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Piston Ring (6 parts), Cylinder Head Gasket Set (3 parts) and Intake & Exhaust Manifold Gasket Set (3 parts). The other 14 part types cover the remaining 20 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
SEALED POWER 1010M
🇨🇦 CA
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
SEALED POWER 9185CP
🇨🇦 CA
View on
Amazon
SEALED POWER 69185CP
🇨🇦 CA
Set
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Seal

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS WS6186
🇨🇦 CA
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 7564C
🇨🇦 CA
with Copper-Faced Sandwich Head Gaskets
Fitment notes — FEL-PRO 7564C
with Copper-Faced Sandwich Head Gaskets
3.312 (in) Gasket Bore
View on
Amazon
MAHLE / CLEVITE 1059C
🇨🇦 CA
Composite
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO HS7564C
🇨🇦 CA
with Copper-Faced Sandwich Head GasketsIncludes Valve Stem Seals
Fitment notes — FEL-PRO HS7564C
with Copper-Faced Sandwich Head GasketsIncludes Valve Stem Seals
3.312 (in) Gasket Bore
View on
Amazon
MAHLE / CLEVITE HS1059C
🇨🇦 CA
Includes Valve Stem Seals
View on
Amazon
VICTOR REINZ 021012401
🇨🇦 CA
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO FS7564C2
🇨🇦 CA
Overhaul SetRear Main Seal, Timing Cover Seal Not Included
Fitment notes — FEL-PRO FS7564C2
Overhaul SetRear Main Seal, Timing Cover Seal Not Includedwith Copper-Faced Sandwich Head Gaskets
3.312 (in) Gasket Bore
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake & Exhaust Manifold Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO MS8009B
🇨🇦 CA
Original Equipment (OE) Part Number 318042, 601275
View on
Amazon
MAHLE / CLEVITE MS18005
🇨🇦 CA
Composite
View on
Amazon
VICTOR REINZ 711476800
🇨🇦 CA
View on
Amazon

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake to Exhaust Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ 711620200
🇨🇦 CA
View on
Amazon

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

O-Ring

Brand Part Number Markets Notes Buy
VICTOR REINZ 411041400
🇨🇦 CA
Fuel Filter Bowl1In I.D. X 1-5/16 IN O.D.
View on
Amazon

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO OS4250C
🇨🇦 CA
Original Equipment (OE) Part Number 780477, 933438
View on
Amazon
MAHLE / CLEVITE OS30893
🇨🇦 CA
Cork-Rubber
View on
Amazon
VICTOR REINZ 101017801
🇨🇦 CA
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pressure Relief Valve Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 3122
🇨🇦 CA
View on
Amazon
VICTOR REINZ 711456300
🇨🇦 CA
View on
Amazon

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston

Brand Part Number Markets Notes Buy
SEALED POWER 37P
🇨🇦 CA
Flat HeadCast Iron
Fitment notes — SEALED POWER 37P
Flat HeadCast IronRing Groove Widths: 3/32in, 3/32in, 5/32in, 5/32in
4 Ring Piston7.8 :1 Compression Ratio0.080 IN Oversize (Size: 0.080" Oversize)
View on
Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Ring

Premium

Brand Part Number Markets Notes Buy
SEALED POWER E108KC
🇨🇦 CA
PremiumRing Groove Widths: 3/32in, 3/32in, 5/32in, 5/32in
Fitment notes — SEALED POWER E108KC
PremiumRing Groove Widths: 3/32in, 3/32in, 5/32in, 5/32inSetChrome Steel Top RingDuctile 2nd Ring
Gray Iron 3rd ring (Size: Standard)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Popular 144
🇨🇦 CA
Full SetTop Ring Surface Treatment: Phosphate
Fitment notes — HASTINGS MANUFACTURING 144
Full SetTop Ring Surface Treatment: Phosphatefor 2 Ring Piston
View on
Amazon
SEALED POWER Popular E108X
🇨🇦 CA
SetDuctile Top Ring
Fitment notes — SEALED POWER E108X
SetDuctile Top RingRing Groove Widths: 3/32in, 3/32in, 5/32in, 5/32inDuctile 2nd Ring
Gray Iron 3rd ring
View on
Amazon
HASTINGS MANUFACTURING 144S
🇨🇦 CA
1 Cylinder SetFor 2 Ring Piston
View on
Amazon
HASTINGS MANUFACTURING 2C144S
🇨🇦 CA
1 Cylinder SetTop Ring Surface Treatment: Triple Chrome
Fitment notes — HASTINGS MANUFACTURING 2C144S
1 Cylinder SetTop Ring Surface Treatment: Triple Chromefor 2 Ring Piston
(Size: Standard)
View on
Amazon
HASTINGS MANUFACTURING 2C144
🇨🇦 CA
Full SetTop Ring Surface Treatment: Triple Chrome
Fitment notes — HASTINGS MANUFACTURING 2C144
Full SetTop Ring Surface Treatment: Triple Chromefor 2 Ring PistonChrome Top Ring
(Size: Standard)
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO VS4253C
🇨🇦 CA
CorkIncludes Grommets
Fitment notes — FEL-PRO VS4253C
CorkIncludes Grommets
Original Equipment (OE) Part Number 780469, 980583
View on
Amazon

This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO TCS41552
🇨🇦 CA
View on
Amazon
VICTOR REINZ 151035801
🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ 151044301
🇨🇦 CA
SetCork
Fitment notes — VICTOR REINZ 151044301
SetCorkImproved DesignIncludes Grommets
Grommets Included
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Seat

Brand Part Number Markets Notes Buy
SEALED POWER 24516251N
🇨🇦 CA
IntakeLOC: INT.
Fitment notes — SEALED POWER 24516251N
IntakeLOC: INT.Premium MaterialSize1.6300" OD1.3750" ID0.2160" Depth1.6250" Counter Bore41.4020mm O.D.34.9250mm I.D.5.4860mm Depth41.2750mm Counter Bore45 Degree Seat Angle (Size: Standard)
View on
Amazon

This table covers the Valve seats.

Buying Engine Parts for a 1952 Fargo FO1 Panel Delivery

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 3.6L 218cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Piston Ring and Cylinder Head Gasket Set .

Frequently Asked Questions

How many engine parts fit the 1952 Fargo FO1 Panel Delivery?

Our catalog currently lists 32 engine parts for the 1952 Fargo FO1 Panel Delivery across 17 subcategories and 6 brands, covering the 3.6L 218cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1952 Fargo FO1 Panel Delivery?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1952 Fargo FO1 Panel Delivery was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1952 Fargo FO1 Panel Delivery?

Every part on this page is matched to the 3.6L 218cid L6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1952 Fargo FO1 Panel Delivery

Engine Parts for Other Fargo FO1 Panel Delivery Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.