23 Engine parts are listed for the 1955 Fargo FC3C Pickup, in 11 part types, covering both the 4.0L 241cid V8 and the 4.1L 251cid L6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1955 Fargo FC3C Pickup, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Cylinder Head Gasket Set (3 parts), Engine Kit Gasket Set (3 parts) and Intake & Exhaust Manifold Gasket Set (3 parts). The other 8 part types cover the remaining 14 parts.
The 1955 Fargo FC3C Pickup was sold with both the 4.0L 241cid V8 and the 4.1L 251cid L6. 1 part fits every engine; the other 22 are engine-specific. Each part shows which engine(s) it fits.
3 brands supply engine parts for the 1955 Fargo FC3C Pickup, led by VICTOR REINZ (11 parts), FEL-PRO (8 parts) and MAHLE / CLEVITE (4 parts).
Each part number listed for the 1955 Fargo FC3C Pickup opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.0L 241cid V8 | BS40245 | 🇨🇦 CA | Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.0L 241cid V8 | 191014701 | 🇨🇦 CA | SetRubber | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts for the 1955 Fargo FC3C Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO BS40245 and VICTOR REINZ 191014701.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 4.1L 251cid L6 | 3029 | 🇨🇦 CA | CompositeCylinder Head Gasket Material: Composite | View on Amazon |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 611067000 | 🇨🇦 CA | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Cylinder Head Gasket parts are listed for the 1955 Fargo FC3C Pickup, from MAHLE / CLEVITE and VICTOR REINZ.
This group includes MAHLE / CLEVITE 3029 and VICTOR REINZ 611067000.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | HS7256C | 🇨🇦 CA | with Copper-Faced Sandwich Head GasketsIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 4.1L 251cid L6 | HS4922 | 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 021088401 | 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts are listed for the 1955 Fargo FC3C Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO HS7256C, MAHLE / CLEVITE HS4922 and VICTOR REINZ 021088401.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | FS7256C | 🇨🇦 CA | Overhaul SetRear Main Seal, Timing Cover Seal Not Included | View on Amazon |
| MAHLE / CLEVITE Fits: 4.1L 251cid L6 | FS4922 | 🇨🇦 CA | Full Set | View on Amazon |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 011033101 | 🇨🇦 CA | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts are listed for the 1955 Fargo FC3C Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO FS7256C, MAHLE / CLEVITE FS4922 and VICTOR REINZ 011033101.
Intake & Exhaust Manifold Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | MS8583B | 🇨🇦 CA | Original Equipment (OE) Part Number 66351, 666353, 666354 | View on Amazon |
| MAHLE / CLEVITE Fits: 4.1L 251cid L6 | MS15029 | 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 711477500 | 🇨🇦 CA | Replaces OE Part Number(s) 666351, 666353, 666354 | View on Amazon |
This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1955 Fargo FC3C Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO MS8583B, MAHLE / CLEVITE MS15029 and VICTOR REINZ 711477500.
O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: all 1955 FC3C Pickup engines | 411041400 | 🇨🇦 CA | 1In I.D. X 1-5/16 IN O.D. | View on Amazon |
This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: VICTOR REINZ 411041400.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | OS915C | 🇨🇦 CA | Original Equipment (OE) Part Number 780478, 933439, 1243628 | View on Amazon |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 101046101 | 🇨🇦 CA | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts for the 1955 Fargo FC3C Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO OS915C and VICTOR REINZ 101046101.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | 3122 | 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 711456300 | 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts are listed for the 1955 Fargo FC3C Pickup, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.
Push Rod Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | VS917R | 🇨🇦 CA | Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 151102601 | 🇨🇦 CA | Improved DesignCork | View on Amazon |
This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Push Rod Gasket Set parts for the 1955 Fargo FC3C Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO VS917R and VICTOR REINZ 151102601.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.1L 251cid L6 | TCS41552 | 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.1L 251cid L6 | 151035801 | 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Timing Cover Gasket parts for the 1955 Fargo FC3C Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO TCS41552 and VICTOR REINZ 151035801.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 4.0L 241cid V8 | 121007501 | 🇨🇦 CA | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: VICTOR REINZ 121007501.
Buying Engine Parts for a 1955 Fargo FC3C Pickup
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket Set and Engine Kit Gasket Set .
Frequently Asked Questions
How many engine parts fit the 1955 Fargo FC3C Pickup?
Our catalog currently lists 23 engine parts for the 1955 Fargo FC3C Pickup across 11 subcategories and 3 brands, covering both the 4.0L 241cid V8 and the 4.1L 251cid L6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1955 Fargo FC3C Pickup engines?
Some do. 1 part fits every engine; the other 22 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1955 Fargo FC3C Pickup?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1955 Fargo FC3C Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1955 Fargo FC3C Pickup?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1955 Fargo FC3C Pickup
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.