The 1958 Fargo FL8 Pickup has 7 steering parts with verified fitment on this page — 2 part types and 4 brands, covering the 5.1L 313cid V8 engine. Each part includes a manufacturer part number and application notes.
On the 1958 Fargo FL8 Pickup, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 7 listed parts are Power Steering Fluid (4 parts) and Power Steering Pump Shaft Seal (3 parts).
Every part on this page is matched to the 5.1L 313cid V8 — the only engine offered in the 1958 Fargo FL8 Pickup.
The most listed brands for 1958 Fargo FL8 Pickup steering parts are LUBEGARD (4 parts), BCA (1 part) and NATIONAL (1 part), plus 1 more brand.
Each part number listed for the 1958 Fargo FL8 Pickup opens a page with every vehicle that part fits.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD | 23201 | 🇨🇦 CA | 1 QuartSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD | 23205 | 🇨🇦 CA | 5 GallonSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD | 23232 | 🇨🇦 CA | Synthetic Power Steering Fluid1 Quart | View on Amazon |
| LUBEGARD | 23255 | 🇨🇦 CA | 55 GallonSynthetic Power Steering Fluid | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
LUBEGARD supplies the 4 Power Steering Fluid parts for the 1958 Fargo FL8 Pickup.
Listed part numbers: LUBEGARD 23201, LUBEGARD 23205 and LUBEGARD 23232, plus the other parts above.
Power Steering Pump Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS8773S | 🇨🇦 CA | View on Amazon | |
| NATIONAL | 8773S | 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS | WS8773S | 🇨🇦 CA | Unknown Steering System | View on Amazon |
This table covers the seals at the Power Steering Pump Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Power Steering Pump Shaft Seal parts for the 1958 Fargo FL8 Pickup come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS8773S, NATIONAL 8773S and WJB / INMOTION PARTS WS8773S.
Buying Steering Parts for a 1958 Fargo FL8 Pickup
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 5.1L 313cid V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Power Steering Fluid and Power Steering Pump Shaft Seal .
Frequently Asked Questions
How many steering parts fit the 1958 Fargo FL8 Pickup?
Our catalog currently lists 7 steering parts for the 1958 Fargo FL8 Pickup across 2 subcategories and 4 brands, covering the 5.1L 313cid V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 1958 Fargo FL8 Pickup?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1958 Fargo FL8 Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1958 Fargo FL8 Pickup?
Every part on this page is matched to the 5.1L 313cid V8 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1958 Fargo FL8 Pickup
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.