1959 Fargo FW100 Panel Delivery Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SEALED POWER 1011M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 1959 Fargo FW100 Panel Delivery come from 2 brands — KING ENGINE BEARINGS and SEALED POWER. The "Popular" part is KING ENGINE BEARINGS CR805SI.

The High Performance section lists 4 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR805XPN is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR805SI.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes KING ENGINE BEARINGS CR805SI, KING ENGINE BEARINGS CR805XPN and KING ENGINE BEARINGS CR805XPNC and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 1959 Fargo FW100 Panel Delivery, from MAHLE / CLEVITE and KING ENGINE BEARINGS. MAHLE / CLEVITE MS540H carries the "Popular" badge.

High Performance: 4 parts, from MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is MAHLE / CLEVITE MS540H.

The Standard Replacement section: 2 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. MAHLE / CLEVITE MS540P is listed in this group.

This group includes MAHLE / CLEVITE MS540H, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts are listed for the 1959 Fargo FW100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO BS40245 and VICTOR REINZ 191014701.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1959 Fargo FW100 Panel Delivery come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO 7688C, FEL-PRO 7734PT and MAHLE / CLEVITE 3029, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 1959 Fargo FW100 Panel Delivery come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO HS7256C, FEL-PRO HS7734PT and MAHLE / CLEVITE HS4922, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 1959 Fargo FW100 Panel Delivery come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO FS7256C, FEL-PRO FS7734PT2 and MAHLE / CLEVITE FS4922, plus the other parts above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts for the 1959 Fargo FW100 Panel Delivery come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO MS8583B, MAHLE / CLEVITE MS15029 and VICTOR REINZ 711477500.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 1959 Fargo FW100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO MS9344SH and VICTOR REINZ 111042301.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 1959 Fargo FW100 Panel Delivery — VICTOR REINZ 411041400.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 1959 Fargo FW100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO OS915C, FEL-PRO OS6566C1 and VICTOR REINZ 101046101, among others listed above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts for the 1959 Fargo FW100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits both the 4.1L 251cid L6 and the 5.1L 313cid V8.

This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: SEALED POWER 32NP.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts for the 1959 Fargo FW100 Panel Delivery come from HASTINGS MANUFACTURING.

Part numbers include HASTINGS MANUFACTURING 2C445, HASTINGS MANUFACTURING 2C445S and HASTINGS MANUFACTURING 445, among others listed above.

This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Push Rod Gasket Set parts are listed for the 1959 Fargo FW100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO VS917R and VICTOR REINZ 151102601.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Timing Cover Gasket parts are listed for the 1959 Fargo FW100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO TCS41552, FEL-PRO TCS65631 and VICTOR REINZ 151035801 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 1959 Fargo FW100 Panel Delivery, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO VS11828C, MAHLE / CLEVITE VS38282 and VICTOR REINZ 151042501.

This table covers the Valve seats. Read more

This group shows a single part: SEALED POWER 24518121.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1959 Fargo FW100 Panel Delivery — VICTOR REINZ 121007501.