1960 Fargo F100 Panel Delivery Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1960 Fargo F100 Panel Delivery — SEALED POWER 1011M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 1960 Fargo F100 Panel Delivery, from KING ENGINE BEARINGS and SEALED POWER. KING ENGINE BEARINGS CR805SI carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 4 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR805XPN.

The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR805SI is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes KING ENGINE BEARINGS CR805SI, KING ENGINE BEARINGS CR805XPN and KING ENGINE BEARINGS CR805XPNC and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 1960 Fargo F100 Panel Delivery come from 2 brands — MAHLE / CLEVITE and KING ENGINE BEARINGS. The "Popular" part is MAHLE / CLEVITE MS540H.

The High Performance section: 4 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. MAHLE / CLEVITE MS540H is listed in this group.

Standard Replacement: 2 parts, from MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is MAHLE / CLEVITE MS540P.

Listed part numbers: MAHLE / CLEVITE MS540H, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 1960 Fargo F100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO BS40245 and VICTOR REINZ 191014701.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE.

Part numbers include FEL-PRO 7688C, FEL-PRO 7734PT and MAHLE / CLEVITE 3029, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO HS7734PT, MAHLE / CLEVITE HS1134TC and VICTOR REINZ 021023501.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO FS7734PT2 and VICTOR REINZ 011006701.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO MS8583B, MAHLE / CLEVITE MS15029 and VICTOR REINZ 711477500.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO MS9344SH and VICTOR REINZ 111042301.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411041400.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

2 Oil Filter parts for the 1960 Fargo F100 Panel Delivery come from FRAM.

The High Performance / Heavy Duty section lists 1 option from FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM TG8A is listed in this group.

Standard Replacement: 1 part, from FRAM. A representative part number is FRAM PH8A.

Part numbers include FRAM TG8A and FRAM PH8A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 1960 Fargo F100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO OS915C, FEL-PRO OS6566C1 and VICTOR REINZ 101046101 and the remaining parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1960 Fargo F100 Panel Delivery, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1960 F100 Panel Delivery.

Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1960 Fargo F100 Panel Delivery — SEALED POWER 32NP.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies the 4 Piston Ring parts for the 1960 Fargo F100 Panel Delivery.

Part numbers include HASTINGS MANUFACTURING 2C445, HASTINGS MANUFACTURING 2C445S and HASTINGS MANUFACTURING 445, among others listed above.

This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Push Rod Gasket Set parts for the 1960 Fargo F100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO VS917R and VICTOR REINZ 151102601.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Timing Cover Gasket parts for the 1960 Fargo F100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO TCS41552, FEL-PRO TCS65631 and VICTOR REINZ 151035801 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 1960 Fargo F100 Panel Delivery come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO VS11828C, MAHLE / CLEVITE VS38282 and VICTOR REINZ 151042501.

This table covers the Valve seats. Read more

One part is listed for the 1960 Fargo F100 Panel Delivery — SEALED POWER 24518121.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: VICTOR REINZ 121007501.