The 1964 Fargo FW100 Pickup has 18 ignition parts with verified fitment on this page — 4 part types and 9 brands, covering both the 3.7L 225cid L6 and the 5.1L 313cid V8. Each part includes a manufacturer part number and application notes.
The ignition system on the 1964 Fargo FW100 Pickup delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (7 parts), Spark Plug (7 parts) and Distributor Mounting Gasket (2 parts). The other 1 part type covers the remaining 2 parts.
The 1964 Fargo FW100 Pickup was sold with both the 3.7L 225cid L6 and the 5.1L 313cid V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
9 brands supply ignition parts for the 1964 Fargo FW100 Pickup, led by ACDELCO (4 parts), CHAMPION (4 parts) and STANDARD MOTOR PRODUCTS (3 parts), plus 6 more brands. Quality grades include Copper / Nickel, Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1964 Fargo FW100 Pickup. 4 parts have it, including ACDELCO U505 (Ignition Coil) and ACDELCO R43S (Spark Plug). Each part number opens a page with every vehicle that part fits.
Distributor Mounting Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.1L 313cid V8 | 6464 | 🇨🇦 CA | Distributor mounting gasket and Distributor shaft seal included | View on Amazon |
| VICTOR REINZ Fits: 5.1L 313cid V8 | 711387200 | 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Distributor Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Distributor Mounting Gasket parts are listed for the 1964 Fargo FW100 Pickup, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO 6464 and VICTOR REINZ 711387200.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 5.1L 313cid V8 | UC12F | 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 5.1L 313cid V8 | 2IGC0056 | 🇨🇦 CA | View on Amazon | |
| SKP Fits: 5.1L 313cid V8 | SKUC12 | 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 5.1L 313cid V8 | UC12T | 🇨🇦 CA | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 5.1L 313cid V8 | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| WELLS Popular Fits: 5.1L 313cid V8 | 5C1026 | 🇨🇦 CA | Requires External Resistor: YES | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 5.1L 313cid V8 | UC12 | 🇨🇦 CA | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
7 Ignition Coil parts for the 1964 Fargo FW100 Pickup come from 6 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 3 other brands. The "Popular" part is ACDELCO U505.
The Economy section lists 4 options from FVP, HOLSTEIN, SKP and 1 other brand — the catalog's value-priced group. FVP UC12F is listed in this group.
In the Standard Replacement grade, ACDELCO, WELLS and STANDARD MOTOR PRODUCTS supply 3 parts: built to original-equipment specification. A representative part number is ACDELCO U505.
Listed part numbers: ACDELCO U505, FVP UC12F and HOLSTEIN 2IGC0056, plus the other parts above.
Ignition Lock Cylinder
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 5.1L 313cid V8 | US12L | 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 5.1L 313cid V8 | 4H1058 | 🇨🇦 CA | Used with 1S6151 Ignition Starter Switch | View on Amazon |
This table covers the lock cylinders in the ignition switch.
2 Ignition Lock Cylinder parts for the 1964 Fargo FW100 Pickup come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
This group includes STANDARD MOTOR PRODUCTS US12L and WELLS 4H1058.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.026" and 0.035". Replacement brands in this table include CHAMPION and ACDELCO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 5.1L 313cid V8 | R43S | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Popular Fits: 5.1L 313cid V8 | 14 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.035" | View on Amazon |
| CHAMPION Fits: 5.1L 313cid V8 | 10 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.035" | View on Amazon |
| CHAMPION Fits: 5.1L 313cid V8 | 120 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.026" | View on Amazon |
| CHAMPION Fits: 5.1L 313cid V8 | 123 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 5.1L 313cid V8 | 41833 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 5.1L 313cid V8 | 7 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
7 Spark Plug parts are listed for the 1964 Fargo FW100 Pickup, from CHAMPION and ACDELCO. ACDELCO R43S carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION and ACDELCO supply 5 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R43S.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41833.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 7.
This group includes ACDELCO R43S, CHAMPION 14 and CHAMPION 10 and the remaining parts above.
Buying Ignition Parts for a 1964 Fargo FW100 Pickup
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1964 Fargo FW100 Pickup?
Our catalog currently lists 18 ignition parts for the 1964 Fargo FW100 Pickup across 4 subcategories and 9 brands, covering both the 3.7L 225cid L6 and the 5.1L 313cid V8. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1964 Fargo FW100 Pickup engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1964 Fargo FW100 Pickup?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1964 Fargo FW100 Pickup?
Notes on this page include pre-set gaps of 0.025", 0.026" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Fargo FW100 Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1964 Fargo FW100 Pickup?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1964 Fargo FW100 Pickup
Ignition Parts for Other Fargo FW100 Pickup Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.