1965 Fargo FW100 Pickup Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts are listed for the 1965 Fargo FW100 Pickup, from BCA and WJB / INMOTION PARTS. All of them fit every engine offered in the 1965 FW100 Pickup.

Part numbers include BCA NS40769S and WJB / INMOTION PARTS WS40769S.

This table covers the bearings and races that support the differential carrier. Read more

10 Differential Carrier Bearing / Race parts are listed for the 1965 Fargo FW100 Pickup, from WJB / INMOTION PARTS, BCA and NATIONAL. WJB / INMOTION PARTS WT25590 carries the "Popular" badge. All of them fit every engine offered in the 1965 FW100 Pickup.

In the Economy grade, WJB / INMOTION PARTS supplies 4 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WT25590.

The Standard Replacement section lists 6 options from BCA and NATIONAL — built to original-equipment specification. NATIONAL 25523 is listed in this group.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Differential Cover Gasket parts are listed for the 1965 Fargo FW100 Pickup, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1965 FW100 Pickup.

Listed part numbers: FEL-PRO RDS6629, FEL-PRO RDS6583 and VICTOR REINZ 711481100, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

19 Differential Pinion Bearing / Race parts for the 1965 Fargo FW100 Pickup come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. The "Popular" part is WJB / INMOTION PARTS WTHM803110. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

The Economy section: 8 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTHM803110 is listed in this group.

Standard Replacement: 11 parts, from BCA and NATIONAL. A representative part number is NATIONAL 02820.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts are listed for the 1965 Fargo FW100 Pickup, from SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 1965 FW100 Pickup.

Listed part numbers: SCHAEFFLER SR3481 and WJB / INMOTION PARTS WS99155.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts are listed for the 1965 Fargo FW100 Pickup, from BCA, WJB / INMOTION PARTS, NATIONAL and 1 other brand. WJB / INMOTION PARTS WS5778 carries the "Popular" badge. All of them fit every engine offered in the 1965 FW100 Pickup.

Listed part numbers: WJB / INMOTION PARTS WS5778, BCA NS5778V and BCA NS7216, plus the other parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

This group shows a single part: WJB / INMOTION PARTS WKRA300.

This table covers the Transfer Case Idler Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Idler Shaft Bearing parts are listed for the 1965 Fargo FW100 Pickup, from WJB / INMOTION PARTS, NATIONAL and BCA. WJB / INMOTION PARTS WT2720 carries the "Popular" badge. All of them fit every engine offered in the 1965 FW100 Pickup.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT2720.

The Standard Replacement section: 1 option from NATIONAL. NATIONAL 2720 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes WJB / INMOTION PARTS WT2720, WJB / INMOTION PARTS WT2793 and NATIONAL 2720 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

2 Transfer Case Input Shaft Repair Sleeve parts for the 1965 Fargo FW100 Pickup come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Listed part numbers: NATIONAL 99212 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts for the 1965 Fargo FW100 Pickup come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Listed part numbers: BCA NS410308, NATIONAL 410308 and WJB / INMOTION PARTS WS410308.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: WJB / INMOTION PARTS WRQ15902.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Transfer Case Output Shaft Bearing parts for the 1965 Fargo FW100 Pickup come from 3 brands — WJB / INMOTION PARTS, NATIONAL and BCA. The "Popular" part is WJB / INMOTION PARTS WT2720. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

The Economy section: 4 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT2720 is listed in this group.

Standard Replacement: 5 parts, from NATIONAL and BCA. A representative part number is NATIONAL 2720.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

2 Transfer Case Output Shaft Repair Sleeve parts are listed for the 1965 Fargo FW100 Pickup, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1965 FW100 Pickup.

Listed part numbers: NATIONAL 99212 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 1965 Fargo FW100 Pickup, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1965 FW100 Pickup.

Part numbers include NATIONAL 410308 and WJB / INMOTION PARTS WS410308.

This table covers the wear sleeves used to restore a Transfer Case Shift Shaft seal surface. Read more

3 Transfer Case Shift Shaft Repair Sleeve parts for the 1965 Fargo FW100 Pickup come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Listed part numbers: BCA NS99076, NATIONAL 99076 and WJB / INMOTION PARTS WS99076.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Shift Shaft Seal parts for the 1965 Fargo FW100 Pickup come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Part numbers include BCA NS6835S, NATIONAL 6835S and WJB / INMOTION PARTS WS6835S.