1966 Fargo W100 Panel Delivery Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts for the 1966 Fargo W100 Panel Delivery come from 2 brands — BCA and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

This group includes BCA NS40769S and WJB / INMOTION PARTS WS40769S.

This table covers the bearings and races that support the differential carrier. Read more

15 Differential Carrier Bearing / Race parts for the 1966 Fargo W100 Panel Delivery come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WTLM104949. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

The Economy section lists 6 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTLM104949 is listed in this group.

In the Standard Replacement grade, BCA, NATIONAL and ACDELCO supply 9 parts: built to original-equipment specification. A representative part number is ACDELCO ACLM104949.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Differential Cover Gasket parts for the 1966 Fargo W100 Panel Delivery come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Part numbers include FEL-PRO RDS6629, FEL-PRO RDS6583 and VICTOR REINZ 711481100, among others listed above.

This table covers the bearings and races on the differential pinion. Read more

26 Differential Pinion Bearing / Race parts are listed for the 1966 Fargo W100 Panel Delivery, from BCA, WJB / INMOTION PARTS and NATIONAL. WJB / INMOTION PARTS WTM88010 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 15 parts from BCA and NATIONAL.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts for the 1966 Fargo W100 Panel Delivery come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Part numbers include SCHAEFFLER SR3506, SCHAEFFLER SR3481 and WJB / INMOTION PARTS WS99155, among others listed above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Differential Pinion Seal parts for the 1966 Fargo W100 Panel Delivery come from 4 brands — BCA, NATIONAL, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is NATIONAL 7216. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Part numbers include NATIONAL 7216, WJB / INMOTION PARTS WS5778 and BCA NS8515N, among others listed above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

One part is listed for the 1966 Fargo W100 Panel Delivery — WJB / INMOTION PARTS WKRA300.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

One part is listed for the 1966 Fargo W100 Panel Delivery — BCA NS88187.

This table covers the Transfer Case Idler Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Idler Shaft Bearing parts for the 1966 Fargo W100 Panel Delivery come from 3 brands — WJB / INMOTION PARTS, NATIONAL and BCA. The "Popular" part is WJB / INMOTION PARTS WT2720. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT2720 is listed in this group.

Standard Replacement: 1 part, from NATIONAL. A representative part number is NATIONAL 2720.

3 further parts sit outside the graded sections, with the same engine-level match.

This group includes WJB / INMOTION PARTS WT2720, WJB / INMOTION PARTS WT2793 and NATIONAL 2720 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

2 Transfer Case Input Shaft Repair Sleeve parts are listed for the 1966 Fargo W100 Panel Delivery, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1966 W100 Panel Delivery.

Part numbers include NATIONAL 99212 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts are listed for the 1966 Fargo W100 Panel Delivery, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1966 W100 Panel Delivery.

This group includes BCA NS410308, NATIONAL 410308 and WJB / INMOTION PARTS WS410308.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1966 Fargo W100 Panel Delivery — WJB / INMOTION PARTS WRQ15902.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Transfer Case Output Shaft Bearing parts are listed for the 1966 Fargo W100 Panel Delivery, from WJB / INMOTION PARTS, NATIONAL and BCA. WJB / INMOTION PARTS WT2720 carries the "Popular" badge. All of them fit every engine offered in the 1966 W100 Panel Delivery.

Economy: 4 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT2720.

The Standard Replacement section: 5 options from NATIONAL and BCA. NATIONAL 2720 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

2 Transfer Case Output Shaft Repair Sleeve parts for the 1966 Fargo W100 Panel Delivery come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Listed part numbers: NATIONAL 99212 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 1966 Fargo W100 Panel Delivery come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Listed part numbers: SCHAEFFLER SS3110 and WJB / INMOTION PARTS WS410308.

This table covers the wear sleeves used to restore a Transfer Case Shift Shaft seal surface. Read more

3 Transfer Case Shift Shaft Repair Sleeve parts are listed for the 1966 Fargo W100 Panel Delivery, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1966 W100 Panel Delivery.

This group includes BCA NS99076, NATIONAL 99076 and WJB / INMOTION PARTS WS99076.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Shift Shaft Seal parts are listed for the 1966 Fargo W100 Panel Delivery, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1966 W100 Panel Delivery.

Listed part numbers: BCA NS6835S, NATIONAL 6835S and WJB / INMOTION PARTS WS6835S.

This table covers the U-joints in the driveshaft. Read more

4 Universal Joint parts for the 1966 Fargo W100 Panel Delivery come from MOOG. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

In the Heavy Duty grade, MOOG supplies 2 parts: rated for severe service. A representative part number is MOOG 365.

Standard Replacement: 2 parts, from MOOG. A representative part number is MOOG 315G.

Part numbers include MOOG 365, MOOG 378 and MOOG 315G, among others listed above.