1967 Fargo D200 Pickup Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

SEALED POWER supplies both parts for the 1967 Fargo D200 Pickup.

This group includes SEALED POWER 1454M and SEALED POWER 1453M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

26 Connecting Rod Bearing parts are listed for the 1967 Fargo D200 Pickup, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. MAHLE / CLEVITE CB481P carries the "Popular" badge. They are grouped as High Performance and Standard Replacement, with High Performance the largest group at 12 parts from KING ENGINE BEARINGS, MAHLE / CLEVITE and ENGINE PRO.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts for the 1967 Fargo D200 Pickup come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. The "Popular" part is MAHLE / CLEVITE MS540P.

The High Performance section lists 5 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. KING ENGINE BEARINGS MB558XPC is listed in this group.

In the Standard Replacement grade, SEALED POWER, MAHLE / CLEVITE and KING ENGINE BEARINGS supply 4 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE MS540P.

Part numbers include MAHLE / CLEVITE MS540P, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 1967 Fargo D200 Pickup come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SCHAEFFLER.

This group includes NATIONAL 99218, SCHAEFFLER SR3515 and WJB / INMOTION PARTS WS99226 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts for the 1967 Fargo D200 Pickup come from 7 brands — MAHLE / CLEVITE, FEL-PRO, NATIONAL and 4 other brands. The "Popular" part is FEL-PRO BS40245.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO 8553PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO HS7734PT carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

3 Cylinder Head Spacer Shim parts are listed for the 1967 Fargo D200 Pickup, from VICTOR REINZ and MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE 55153, VICTOR REINZ 711638000 and VICTOR REINZ 711638300.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

17 Engine Kit Gasket Set parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, VICTOR REINZ, MAHLE / CLEVITE and 1 other brand. FEL-PRO 2601004 carries the "Popular" badge.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: SEALED POWER V1389.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies the 4 Harmonic Balancer parts for the 1967 Fargo D200 Pickup.

This group includes ENGINE PRO PB1004ST, ENGINE PRO PB1108ST and ENGINE PRO PB1108SS and the remaining parts above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: MAHLE / CLEVITE 66593RS.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO MS900411 carries the "Popular" badge.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts for the 1967 Fargo D200 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411041400.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts for the 1967 Fargo D200 Pickup come from 6 brands — WIX, FRAM, FVP and 3 other brands. The "Popular" part is MOBIL M1301A. 2 parts fit every engine; the other 9 are engine-specific.

The Economy section lists 3 options from FVP, PRO-TEC and PUROLATOR — the catalog's value-priced group. FVP R1515 is listed in this group.

The High Performance / Heavy Duty section lists 3 options from MOBIL, WIX and FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1301A is listed in this group.

Standard Replacement: 5 parts, from WIX and FRAM. A representative part number is FRAM PH8A.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Oil Filter Adapter Gasket / O-Ring parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 415, MAHLE / CLEVITE B31604 and VICTOR REINZ 711347300.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filter Gasket parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 70078 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Oil Pan Gasket parts for the 1967 Fargo D200 Pickup come from 4 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO OS11729C1.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1967 Fargo D200 Pickup, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1967 D200 Pickup.

This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 1967 Fargo D200 Pickup, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE B45558 and VICTOR REINZ 711450000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

7 Piston parts are listed for the 1967 Fargo D200 Pickup, from SILV-O-LITE and SEALED POWER.

The Premium section lists 1 option from SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SILV-O-LITE 1266C is listed in this group.

The Standard Replacement section: 2 options from SILV-O-LITE. SILV-O-LITE 1278 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include SILV-O-LITE 1266C, SILV-O-LITE 1278 and SILV-O-LITE 1278K1, among others listed above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: SEALED POWER 2134Y.

This table covers the rings that seal each piston to the cylinder wall. Read more

13 Piston Ring parts are listed for the 1967 Fargo D200 Pickup, from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 carries the "Popular" badge.

The Premium section: 4 options from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 2M687 is listed in this group.

The Standard Replacement section: 9 options from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 is listed in this group.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

One part is listed for the 1967 Fargo D200 Pickup — SEALED POWER RP3120.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Timing Cover Gasket parts for the 1967 Fargo D200 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO TCS65631.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1967 Fargo D200 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16201 and VICTOR REINZ 711454800.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 1967 Fargo D200 Pickup come from MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE 64572 and MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

17 Valve Cover Gasket parts for the 1967 Fargo D200 Pickup come from 3 brands — MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. The "Popular" part is FEL-PRO VS13395.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: SEALED POWER AT2084.

This table covers the Valve seats. Read more

One part is listed for the 1967 Fargo D200 Pickup — SEALED POWER 24516872.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Valve Stem Seal parts for the 1967 Fargo D200 Pickup come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO SS12764.