1967 Fargo W100 Panel Delivery Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Camshaft Bearing parts are listed for the 1967 Fargo W100 Panel Delivery, from SEALED POWER and MAHLE / CLEVITE.

This group includes MAHLE / CLEVITE SH875S, SEALED POWER 1451M and SEALED POWER 1453M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

24 Connecting Rod Bearing parts are listed for the 1967 Fargo W100 Panel Delivery, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. MAHLE / CLEVITE CB481P carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS, MAHLE / CLEVITE and ENGINE PRO supply 12 parts: engineered beyond original-equipment specification. A representative part number is ENGINE PRO 11481HX.

The Standard Replacement section lists 12 options from MAHLE / CLEVITE, SEALED POWER and KING ENGINE BEARINGS — built to original-equipment specification. MAHLE / CLEVITE CB481P is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts for the 1967 Fargo W100 Panel Delivery come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. The "Popular" part is MAHLE / CLEVITE MS540P.

The High Performance section: 5 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB558XPC is listed in this group.

Standard Replacement: 4 parts, from SEALED POWER, MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is MAHLE / CLEVITE MS540P.

Listed part numbers: MAHLE / CLEVITE MS540P, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 1967 Fargo W100 Panel Delivery come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99218, SCHAEFFLER SR3515 and WJB / INMOTION PARTS WS99218.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts for the 1967 Fargo W100 Panel Delivery come from 7 brands — FEL-PRO, NATIONAL, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO BS40245.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO 8553PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 8553PT, FEL-PRO 7734PT and FEL-PRO 521SD, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO HS7734PT carries the "Popular" badge.

Listed part numbers: FEL-PRO HS7734PT, FEL-PRO HS8553PT12 and FEL-PRO HS7891PT11, plus the other parts above.

This table covers the Cylinder Head Spacer shims. Read more

VICTOR REINZ supplies both parts for the 1967 Fargo W100 Panel Delivery.

Listed part numbers: VICTOR REINZ 711638000 and VICTOR REINZ 711638300.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Engine Kit Gasket Set parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO, VICTOR REINZ, ENGINE PRO and 1 other brand. FEL-PRO 2601154 carries the "Popular" badge.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: SEALED POWER V1389.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies the 4 Harmonic Balancer parts for the 1967 Fargo W100 Panel Delivery.

This group includes ENGINE PRO PB1004ST, ENGINE PRO PB1108ST and ENGINE PRO PB1108SS and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO MS900411 carries the "Popular" badge.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411041400.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

3 Oil Filter parts for the 1967 Fargo W100 Panel Delivery come from FRAM.

The High Performance / Heavy Duty section lists 1 option from FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM TG8A is listed in this group.

Standard Replacement: 2 parts, from FRAM. A representative part number is FRAM PH8A.

Listed part numbers: FRAM TG8A, FRAM PH8A and FRAM CH8PL.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 1967 Fargo W100 Panel Delivery come from 4 brands — MAHLE / CLEVITE, FEL-PRO, ENGINE PRO and 1 other brand. The "Popular" part is FEL-PRO OS11729C1.

Listed part numbers: FEL-PRO OS11729C1, ENGINE PRO 317345WT and MAHLE / CLEVITE OS31416, plus the other parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1967 Fargo W100 Panel Delivery, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1967 Fargo W100 Panel Delivery — MAHLE / CLEVITE B45558.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1967 Fargo W100 Panel Delivery — SEALED POWER 366AP.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 1967 Fargo W100 Panel Delivery, from HASTINGS MANUFACTURING and SEALED POWER. SEALED POWER E233K carries the "Popular" badge.

The Premium section lists 3 options from HASTINGS MANUFACTURING and SEALED POWER — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER E233K is listed in this group.

The Standard Replacement section: 2 options from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 683 is listed in this group.

This group includes SEALED POWER E233K, HASTINGS MANUFACTURING 2M683S and HASTINGS MANUFACTURING 2M683 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Timing Cover Gasket parts for the 1967 Fargo W100 Panel Delivery come from 3 brands — MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO TCS124602, MAHLE / CLEVITE T18750 and MAHLE / CLEVITE JV834, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 1967 Fargo W100 Panel Delivery come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE. The "Popular" part is FEL-PRO VS13379.

Listed part numbers: FEL-PRO VS13379, FEL-PRO VS50145R and MAHLE / CLEVITE VS38322, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 1967 Fargo W100 Panel Delivery come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO SS12419, MAHLE / CLEVITE SS45343 and VICTOR REINZ 121007001.