4 Suspension parts are listed for the 1968 Fargo D100 Pickup, in 1 part type, covering all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8). Each one has a brand, a manufacturer part number and notes that say where it fits.
The suspension system on the 1968 Fargo D100 Pickup controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. Every listed part is a Leaf Spring Bushing.
The 1968 Fargo D100 Pickup was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1968 Fargo D100 Pickup suspension parts are MEVOTECH (2 parts) and MOOG (2 parts).
Each part number listed for the 1968 Fargo D100 Pickup opens a page with every vehicle that part fits.
Leaf Spring Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Fits: 3.7L 225cid L6, 5.2L 318cid V8 | GS254151 | 🇨🇦 CA | Original Grade | View on Amazon |
| MEVOTECH Fits: 3.7L 225cid L6, 5.2L 318cid V8 | MS254151 | 🇨🇦 CA | Supreme | View on Amazon |
| MOOG Fits: 3.7L 225cid L6, 5.2L 318cid V8 | SB266 | 🇨🇦 CA | Fits Front Forward1/2 (in) Inside Diameter x 1 (in) Outside Diameter | View on Amazon |
| MOOG Fits: 3.7L 225cid L6, 5.2L 318cid V8 | SB268 | 🇨🇦 CA | Fits Rear Forward3/4 (in) Inside Diameter x 1-1/2 (in) Outside Diameter | View on Amazon |
This table covers the Leaf Spring bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
4 Leaf Spring Bushing parts for the 1968 Fargo D100 Pickup come from 2 brands — MEVOTECH and MOOG.
Part numbers include MEVOTECH GS254151, MEVOTECH MS254151 and MOOG SB266, among others listed above.
Buying Suspension Parts for a 1968 Fargo D100 Pickup
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Match the engine first. Every suspension part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Leaf Spring Bushing .
Frequently Asked Questions
How many suspension parts fit the 1968 Fargo D100 Pickup?
Our catalog currently lists 4 suspension parts for the 1968 Fargo D100 Pickup across 1 subcategory and 2 brands, covering all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8). Each part is matched to the engine(s) it fits.
Do suspension parts differ between 1968 Fargo D100 Pickup engines?
Yes. Every suspension part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of suspension problems on a 1968 Fargo D100 Pickup?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Fargo D100 Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Fargo D100 Pickup?
First match the engine — each row shows which engine(s) the part fits. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Fargo D100 Pickup
Suspension Parts for Other Fargo D100 Pickup Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.