1969 Fargo A108 Van Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

17 Ignition parts are listed for the 1969 Fargo A108 Van, in 3 part types, covering all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8). Each one has a brand, a manufacturer part number and notes that say where it fits.

The ignition system on the 1969 Fargo A108 Van delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 17 listed parts are Spark Plug (8 parts), Ignition Coil (7 parts) and Spark Plug Tube Seal (2 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP Fits: 2.8L 170cid L6 UC12F
🇨🇦 CA
View on
Amazon
HOLSTEIN Fits: 2.8L 170cid L6 2IGC0056
🇨🇦 CA
View on
Amazon
SKP Fits: 2.8L 170cid L6 SKUC12
🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 2.8L 170cid L6 UC12T
🇨🇦 CA
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 2.8L 170cid L6 U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS Popular Fits: 2.8L 170cid L6 5C1026
🇨🇦 CA
Requires External Resistor: YES
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 2.8L 170cid L6 UC12
🇨🇦 CA
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.032", 0.035", 0.039", 0.041" and 0.045". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 2.8L 170cid L6 R44XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XLS
ProfessionalConventionalPre-Set Gap: 0.039"
Original Equipment-Recommended Gap: .035
View on
Amazon
CHAMPION Fits: 2.8L 170cid L6 322
🇨🇦 CA
Copper PlusPre-Set Gap: 0.041"
Fitment notes — CHAMPION 322
Copper PlusPre-Set Gap: 0.041"
Resistor TypeOE-Recommended Gap: 0.035"
View on
Amazon
CHAMPION Fits: 2.8L 170cid L6 302
🇨🇦 CA
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 302
Copper PlusPre-Set Gap: 0.032"
OE-Recommended Gap: 0.035"Non-Resistor Plug
View on
Amazon
CHAMPION Fits: 2.8L 170cid L6 3221
🇨🇦 CA
Copper Plus
Fitment notes — CHAMPION 3221
Copper Plus
Resistor TypeOE-Recommended Gap: 0.035"
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 2.8L 170cid L6 41802
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41802
ProfessionalDouble PlatinumPre-Set Gap: 0.045"
OE-Recommended Gap: 0.035" (IN)
View on
Amazon
AUTOLITE Fits: 2.8L 170cid L6 APP65
🇨🇦 CA
Double PlatinumPre-Set Gap: 0.035"
Fitment notes — AUTOLITE APP65
Double PlatinumPre-Set Gap: 0.035"
Gap .035 (In) 0.9 (mm)
View on
Amazon
CHAMPION Fits: 2.8L 170cid L6 7322
🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7322
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.035"
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION Popular Fits: 2.8L 170cid L6 3405
🇨🇦 CA
Platinum PowerPlug Type: RN14PMC
Fitment notes — CHAMPION 3405
Platinum PowerPlug Type: RN14PMCPre-Set Gap: 0.035"
OE-Recommended Gap: 0.035"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Tube Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 2.8L 170cid L6 GS33731
🇨🇦 CA
Spark Plug Tube Seal KitMolded Rubber
Fitment notes — MAHLE / CLEVITE GS33731
Spark Plug Tube Seal KitMolded RubberIncludes 6 Pieces
View on
Amazon
VICTOR REINZ Fits: 2.8L 170cid L6 181000301
🇨🇦 CA
Valve Cover
View on
Amazon

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Ignition Parts for a 1969 Fargo A108 Van

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1969 Fargo A108 Van?

Our catalog currently lists 17 ignition parts for the 1969 Fargo A108 Van across 3 subcategories and 10 brands, covering all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1969 Fargo A108 Van engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1969 Fargo A108 Van?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1969 Fargo A108 Van?

Notes on this page include pre-set gaps of 0.032", 0.035", 0.039", 0.041" and 0.045". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Fargo A108 Van was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1969 Fargo A108 Van?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1969 Fargo A108 Van

Ignition Parts for Other Fargo A108 Van Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.