1969 Fargo D100 Pickup Drivetrain Parts

This table covers the bearings and races that support the differential carrier. Read more

9 Differential Carrier Bearing / Race parts for the 1969 Fargo D100 Pickup come from 3 brands — WJB / INMOTION PARTS, BCA and ACDELCO. The "Popular" part is WJB / INMOTION PARTS WTLM104949. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

The Economy section lists 4 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTLM104949 is listed in this group.

In the Standard Replacement grade, BCA and ACDELCO supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO ACLM104949.

Part numbers include WJB / INMOTION PARTS WTLM104949, WJB / INMOTION PARTS WT25520 and WJB / INMOTION PARTS WTLM104912, among others listed above.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Differential Cover Gasket parts for the 1969 Fargo D100 Pickup come from 3 brands — FEL-PRO, MOTIVE GEAR and VICTOR REINZ. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Listed part numbers: FEL-PRO RDS6583, MOTIVE GEAR 5101 and VICTOR REINZ 711482500.

This table covers the Differential Gear Installation kits. Read more

3 Differential Gear Installation Kit parts are listed for the 1969 Fargo D100 Pickup, from MOTIVE GEAR and RICHMOND. All of them fit every engine offered in the 1969 D100 Pickup.

This group includes MOTIVE GEAR C825IK, MOTIVE GEAR C875IKL and RICHMOND 831031B.

This table covers the bearings and races on the differential pinion. Read more

14 Differential Pinion Bearing / Race parts are listed for the 1969 Fargo D100 Pickup, from BCA, WJB / INMOTION PARTS and MOTIVE GEAR. WJB / INMOTION PARTS WTM88048 carries the "Popular" badge. All of them fit every engine offered in the 1969 D100 Pickup.

Economy: 6 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTM88048.

The Standard Replacement section: 8 options from BCA and MOTIVE GEAR. BCA NBM88048 is listed in this group.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts for the 1969 Fargo D100 Pickup come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Part numbers include SCHAEFFLER SR3506 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts for the 1969 Fargo D100 Pickup come from 3 brands — NATIONAL, BCA and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 5126. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

Part numbers include NATIONAL 5126, BCA NS8515N and BCA NS5126, among others listed above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

12 Differential Rebuild Kit parts are listed for the 1969 Fargo D100 Pickup, from MOTIVE GEAR and RICHMOND. RICHMOND XL10311 carries the "Popular" badge. All of them fit every engine offered in the 1969 D100 Pickup.

In the Master Kit grade, RICHMOND and MOTIVE GEAR supply 8 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is RICHMOND XL10311.

The Standard Kit section lists 4 options from MOTIVE GEAR — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. MOTIVE GEAR R875RL is listed in this group.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

One part is listed for the 1969 Fargo D100 Pickup — BCA NS88187.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

4 Differential Ring and Pinion parts for the 1969 Fargo D100 Pickup come from 2 brands — RICHMOND and MOTIVE GEAR. Every part fits both the 3.7L 225cid L6 and the 5.2L 318cid V8.

The High Performance section lists 1 option from MOTIVE GEAR — engineered beyond original-equipment specification. MOTIVE GEAR C887L10 is listed in this group.

Standard Replacement: 3 parts, from RICHMOND. A representative part number is RICHMOND 6900581.

This group includes MOTIVE GEAR C887L10, RICHMOND 6900581 and RICHMOND 6903701 and the remaining parts above.

This table covers the spools that lock the differential side gears together. Read more

One part is listed for the 1969 Fargo D100 Pickup — RICHMOND XL5200.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1969 Fargo D100 Pickup — WJB / INMOTION PARTS WRQ15902.

This table covers the U-joints in the driveshaft. Read more

4 Universal Joint parts for the 1969 Fargo D100 Pickup come from MOOG.

In the Heavy Duty grade, MOOG supplies 2 parts: rated for severe service. A representative part number is MOOG 245.

Standard Replacement: 2 parts, from MOOG. A representative part number is MOOG 315G.

Part numbers include MOOG 245, MOOG 246 and MOOG 315G, among others listed above.

This table covers the Universal Joint Strap kits. Read more

This group shows a single part: MOOG 31810.