1969 Fargo W100 Pickup Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts are listed for the 1969 Fargo W100 Pickup, from BCA and WJB / INMOTION PARTS. All of them fit every engine offered in the 1969 W100 Pickup.

Listed part numbers: BCA NS40769S and WJB / INMOTION PARTS WS40769S.

This table covers the bearings and races that support the differential carrier. Read more

16 Differential Carrier Bearing / Race parts are listed for the 1969 Fargo W100 Pickup, from WJB / INMOTION PARTS, BCA, ACDELCO and 1 other brand. WJB / INMOTION PARTS WTLM104949 carries the "Popular" badge. All of them fit every engine offered in the 1969 W100 Pickup.

In the Economy grade, WJB / INMOTION PARTS supplies 7 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WTLM104949.

The Standard Replacement section lists 9 options from BCA, ACDELCO and NATIONAL — built to original-equipment specification. ACDELCO ACLM104949 is listed in this group.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Differential Cover Gasket parts are listed for the 1969 Fargo W100 Pickup, from FEL-PRO, VICTOR REINZ and MOTIVE GEAR. FEL-PRO RDS6629 carries the "Popular" badge. All of them fit every engine offered in the 1969 W100 Pickup.

Part numbers include FEL-PRO RDS6629, FEL-PRO RDS55073 and FEL-PRO RDS6583, among others listed above.

This table covers the Differential Gear Installation kits. Read more

3 Differential Gear Installation Kit parts for the 1969 Fargo W100 Pickup come from 2 brands — MOTIVE GEAR and RICHMOND. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

Part numbers include MOTIVE GEAR C825IK, MOTIVE GEAR C875IKL and RICHMOND 831031B.

This table covers the bearings and races on the differential pinion. Read more

25 Differential Pinion Bearing / Race parts for the 1969 Fargo W100 Pickup come from 4 brands — BCA, WJB / INMOTION PARTS, NATIONAL and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WTM88010. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

The Economy section: 10 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTM88010 is listed in this group.

Standard Replacement: 15 parts, from BCA, NATIONAL and MOTIVE GEAR. A representative part number is BCA NBM88010.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts are listed for the 1969 Fargo W100 Pickup, from SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 1969 W100 Pickup.

Part numbers include SCHAEFFLER SR3506, SCHAEFFLER SR3481 and WJB / INMOTION PARTS WS99155, among others listed above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Differential Pinion Seal parts are listed for the 1969 Fargo W100 Pickup, from BCA, NATIONAL, WJB / INMOTION PARTS and 1 other brand. NATIONAL 5126 carries the "Popular" badge. All of them fit every engine offered in the 1969 W100 Pickup.

Listed part numbers: NATIONAL 5126, WJB / INMOTION PARTS WS5778 and BCA NS8515N, plus the other parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

15 Differential Rebuild Kit parts for the 1969 Fargo W100 Pickup come from 4 brands — MOTIVE GEAR, RICHMOND, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is RICHMOND XL10311. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

The Master Kit section lists 8 options from RICHMOND and MOTIVE GEAR — grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. RICHMOND XL10311 is listed in this group.

In the Standard Kit grade, MOTIVE GEAR, WJB / INMOTION PARTS and NATIONAL supply 7 parts: grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR R875RL.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

This group shows a single part: BCA NS88187.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

4 Differential Ring and Pinion parts are listed for the 1969 Fargo W100 Pickup, from RICHMOND and MOTIVE GEAR. All of them fit every engine offered in the 1969 W100 Pickup.

In the High Performance grade, MOTIVE GEAR supplies 1 part: engineered beyond original-equipment specification. A representative part number is MOTIVE GEAR C887L10.

The Standard Replacement section: 3 options from RICHMOND. RICHMOND 6900581 is listed in this group.

This group includes MOTIVE GEAR C887L10, RICHMOND 6900581 and RICHMOND 6903701 and the remaining parts above.

This table covers the spools that lock the differential side gears together. Read more

This group shows a single part: RICHMOND XL5200.

This table covers the Transfer Case Idler Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Idler Shaft Bearing parts are listed for the 1969 Fargo W100 Pickup, from WJB / INMOTION PARTS, NATIONAL and BCA. WJB / INMOTION PARTS WT2720 carries the "Popular" badge. All of them fit every engine offered in the 1969 W100 Pickup.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT2720.

The Standard Replacement section: 1 option from NATIONAL. NATIONAL 2720 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: WJB / INMOTION PARTS WT2720, WJB / INMOTION PARTS WT2793 and NATIONAL 2720, plus the other parts above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1969 Fargo W100 Pickup — WJB / INMOTION PARTS RBBL307NR.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts for the 1969 Fargo W100 Pickup come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

Listed part numbers: NATIONAL 99212, SCHAEFFLER SR3514 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts for the 1969 Fargo W100 Pickup come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

This group includes BCA NS473468, NATIONAL 473468 and SCHAEFFLER SS3109 and the remaining parts above.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: WJB / INMOTION PARTS WRQ15902.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Output Shaft Bearing parts for the 1969 Fargo W100 Pickup come from 2 brands — BCA and NATIONAL. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

This group includes BCA NB2720, BCA NB307L and NATIONAL 307L.

This table covers the Transfer Case Output Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Pilot Bearing parts for the 1969 Fargo W100 Pickup come from 2 brands — WJB / INMOTION PARTS and BCA. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WRB3216 is listed in this group.

Standard Replacement: 1 part, from BCA. A representative part number is BCA NBB3216.

Part numbers include WJB / INMOTION PARTS WRB3216 and BCA NBB3216.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts are listed for the 1969 Fargo W100 Pickup, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 1969 W100 Pickup.

Part numbers include NATIONAL 99212, SCHAEFFLER SR3514 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts are listed for the 1969 Fargo W100 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. All of them fit every engine offered in the 1969 W100 Pickup.

This group includes BCA NS473468, NATIONAL 473468 and SCHAEFFLER SS3109 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Shift Shaft seal surface. Read more

4 Transfer Case Shift Shaft Repair Sleeve parts for the 1969 Fargo W100 Pickup come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99076, NATIONAL 99076 and SCHAEFFLER SR3453, among others listed above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Shift Shaft Seal parts for the 1969 Fargo W100 Pickup come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS2287, NATIONAL 2287 and SCHAEFFLER SS2158 and the remaining parts above.

This table covers the U-joints in the driveshaft. Read more

8 Universal Joint parts are listed for the 1969 Fargo W100 Pickup, from DANA and MOOG. MOOG 246 carries the "Popular" badge.

Economy: 2 parts, from DANA. A representative part number is DANA 253228X.

The Heavy Duty section lists 3 options from MOOG and DANA — rated for severe service. MOOG 246 is listed in this group.

The Standard Replacement section: 3 options from MOOG and DANA. MOOG 317 is listed in this group.

Listed part numbers: MOOG 246, DANA 253228X and DANA 25789X, plus the other parts above.

This table covers the Universal Joint Strap kits. Read more

One part is listed for the 1969 Fargo W100 Pickup — MOOG 31810.