1971 Fargo B100 Van Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Camshaft Bearing parts for the 1971 Fargo B100 Van come from 2 brands — SEALED POWER and MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE SH875S, SEALED POWER 1454M and SEALED POWER 1451M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

18 Connecting Rod Bearing parts for the 1971 Fargo B100 Van come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. The "Popular" part is MAHLE / CLEVITE CB481P.

The High Performance section lists 7 options from MAHLE / CLEVITE, ENGINE PRO and KING ENGINE BEARINGS — engineered beyond original-equipment specification. ENGINE PRO 11481HX is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, SEALED POWER and KING ENGINE BEARINGS supply 9 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB481P.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts are listed for the 1971 Fargo B100 Van, from KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. MAHLE / CLEVITE MS540H carries the "Popular" badge.

High Performance: 3 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE MS540H.

The Standard Replacement section: 3 options from MAHLE / CLEVITE, KING ENGINE BEARINGS and SEALED POWER. MAHLE / CLEVITE MS540P is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: MAHLE / CLEVITE MS540H, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 1971 Fargo B100 Van, from WJB / INMOTION PARTS and NATIONAL.

Listed part numbers: NATIONAL 99218, WJB / INMOTION PARTS WS99226 and WJB / INMOTION PARTS WS99218.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts are listed for the 1971 Fargo B100 Van, from FEL-PRO, NATIONAL, MAHLE / CLEVITE and 4 other brands. FEL-PRO BS40245 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO 7918PT1, FEL-PRO 8553PT and FEL-PRO 521SD, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO HS7918PT4, FEL-PRO HS8553PT12 and MAHLE / CLEVITE HS1162VE, plus the other parts above.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: VICTOR REINZ 711638000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO 2601004.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1971 Fargo B100 Van come from ENGINE PRO.

Part numbers include ENGINE PRO PB1004ST, ENGINE PRO PB1108ST and ENGINE PRO PB1108SS, among others listed above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

One part is listed for the 1971 Fargo B100 Van — MAHLE / CLEVITE 66593RS.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO MS900411.

Listed part numbers: FEL-PRO MS900411, FEL-PRO MS90109 and MAHLE / CLEVITE MS15148W, plus the other parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts are listed for the 1971 Fargo B100 Van, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1971 Fargo B100 Van come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 1971 Fargo B100 Van — GATES 31066.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 1971 Fargo B100 Van, from WIX, FRAM, FVP and 3 other brands. WIX 51515XP carries the "Popular" badge. All of them fit every engine offered in the 1971 B100 Van.

In the Economy grade, FVP, PRO-TEC and PUROLATOR supply 3 parts: the catalog's value-priced group. A representative part number is FVP R1515.

In the High Performance / Heavy Duty grade, WIX, FRAM and MOBIL supply 3 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51515XP.

The Standard Replacement section: 2 options from WIX and FRAM. WIX 51515 is listed in this group.

This group includes WIX 51515XP, FVP R1515 and PRO-TEC PXL51515 and the remaining parts above.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Oil Filter Adapter Gasket / O-Ring parts for the 1971 Fargo B100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 415, MAHLE / CLEVITE B31604 and VICTOR REINZ 711347300.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filter Gasket parts for the 1971 Fargo B100 Van come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 70078 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts are listed for the 1971 Fargo B100 Van, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO OS12705C1, FEL-PRO OS6566C2 and MAHLE / CLEVITE OS30920X and the remaining parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts for the 1971 Fargo B100 Van come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 1971 Fargo B100 Van come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE B45558 and VICTOR REINZ 711450000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 1971 Fargo B100 Van come from 2 brands — SILV-O-LITE and SEALED POWER.

In the Premium grade, SILV-O-LITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SILV-O-LITE 1266C.

Standard Replacement: 1 part, from SEALED POWER. A representative part number is SEALED POWER 285AP.

2 further parts sit outside the graded sections, with the same engine-level match.

This group includes SILV-O-LITE 1266C, SEALED POWER 285AP and SEALED POWER 244NP and the remaining parts above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1971 Fargo B100 Van — SEALED POWER 2134Y.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1971 Fargo B100 Van come from 2 brands — HASTINGS MANUFACTURING and SEALED POWER. The "Popular" part is HASTINGS MANUFACTURING 687.

Premium: 1 part, from HASTINGS MANUFACTURING. A representative part number is HASTINGS MANUFACTURING 2M687.

Standard Replacement: 4 parts, from HASTINGS MANUFACTURING and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 687.

Part numbers include HASTINGS MANUFACTURING 687, HASTINGS MANUFACTURING 2M687 and HASTINGS MANUFACTURING 2C687S, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts are listed for the 1971 Fargo B100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO TCS127691, MAHLE / CLEVITE JV814 and VICTOR REINZ 151035401.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1971 Fargo B100 Van — MAHLE / CLEVITE 64572.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 1971 Fargo B100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO VS12680, MAHLE / CLEVITE VS39745 and VICTOR REINZ 151040001.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 1971 Fargo B100 Van — SEALED POWER AT2084.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 1971 Fargo B100 Van, from VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO SS12764, MAHLE / CLEVITE SS45298 and VICTOR REINZ 121007101, among others listed above.