1971 Fargo W110 Pickup Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

SEALED POWER supplies both parts for the 1971 Fargo W110 Pickup.

Listed part numbers: SEALED POWER 1454M and SEALED POWER 1453M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 1971 Fargo W110 Pickup, from KING ENGINE BEARINGS and SEALED POWER. SEALED POWER 2320CP carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 5 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR806HPND.

The Standard Replacement section lists 3 options from SEALED POWER and KING ENGINE BEARINGS — built to original-equipment specification. SEALED POWER 2320CP is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 1971 Fargo W110 Pickup come from 2 brands — KING ENGINE BEARINGS and SEALED POWER.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB555HP is listed in this group.

Standard Replacement: 2 parts, from KING ENGINE BEARINGS and SEALED POWER. A representative part number is KING ENGINE BEARINGS MB555AM.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: KING ENGINE BEARINGS MB555HP, KING ENGINE BEARINGS MB555HPX and KING ENGINE BEARINGS MB555AM, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 1971 Fargo W110 Pickup come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SCHAEFFLER.

Part numbers include NATIONAL 99218, SCHAEFFLER SR3515 and WJB / INMOTION PARTS WS99226, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 1971 Fargo W110 Pickup come from 6 brands — MAHLE / CLEVITE, FEL-PRO, NATIONAL and 3 other brands. The "Popular" part is FEL-PRO BS40240.

This group includes FEL-PRO BS40240, NATIONAL 3103 and BCA NS3103 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 7918PT1, FEL-PRO 8519PT1 and MAHLE / CLEVITE 1162VC and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO HS7918PT4, FEL-PRO HS7891PT11 and MAHLE / CLEVITE HS1162VE and the remaining parts above.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 1971 Fargo W110 Pickup — VICTOR REINZ 711638300.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. FEL-PRO 2601004 carries the "Popular" badge.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: MAHLE / CLEVITE 66593RS.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO MS90175 carries the "Popular" badge.

This group includes FEL-PRO MS90175, FEL-PRO MS96007 and MAHLE / CLEVITE MS19969 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts for the 1971 Fargo W110 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: GATES 31066.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

2 Oil Filter parts for the 1971 Fargo W110 Pickup come from FRAM.

The High Performance / Heavy Duty section lists 1 option from FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM TG8A is listed in this group.

Standard Replacement: 1 part, from FRAM. A representative part number is FRAM PH8A.

Listed part numbers: FRAM TG8A and FRAM PH8A.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filter Gasket parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70078 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Oil Pan Gasket parts for the 1971 Fargo W110 Pickup come from 4 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO OS11729C1.

This group includes FEL-PRO OS11729C1, ENGINE PRO 317345WT and FEL-PRO OS12705C1 and the remaining parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1971 Fargo W110 Pickup, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1971 Fargo W110 Pickup — VICTOR REINZ 711450000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts are listed for the 1971 Fargo W110 Pickup, from SEALED POWER and SILV-O-LITE.

Listed part numbers: SEALED POWER 244NP and SILV-O-LITE 1294.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: SEALED POWER 2134Y.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 1971 Fargo W110 Pickup, from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 carries the "Popular" badge.

The Premium section lists 1 option from HASTINGS MANUFACTURING — a step above OE specification in materials, tolerances or warranty terms. HASTINGS MANUFACTURING 2M687 is listed in this group.

The Standard Replacement section: 4 options from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 is listed in this group.

Part numbers include HASTINGS MANUFACTURING 687, HASTINGS MANUFACTURING 2M687 and HASTINGS MANUFACTURING 2C687S, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 1971 Fargo W110 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO TCS127691, MAHLE / CLEVITE JV814 and VICTOR REINZ 151035401.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 64572.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 1971 Fargo W110 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO VS12680, MAHLE / CLEVITE VS39745 and VICTOR REINZ 151040001.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: SEALED POWER AT2084.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 1971 Fargo W110 Pickup come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO SS12764, MAHLE / CLEVITE SS45298 and VICTOR REINZ 121007101, among others listed above.