1972 Fargo B200 Van Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1972 Fargo B200 Van — BCA NBRP6408.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: NATIONAL 8835S.

This table covers the carriers that hold the differential gears in the axle. Read more

This group shows a single part: RICHMOND XL5000.

This table covers the bearings and races that support the differential carrier. Read more

9 Differential Carrier Bearing / Race parts for the 1972 Fargo B200 Van come from 3 brands — WJB / INMOTION PARTS, BCA and ACDELCO. The "Popular" part is WJB / INMOTION PARTS WTLM102910. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

The Economy section lists 4 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTLM102910 is listed in this group.

In the Standard Replacement grade, BCA and ACDELCO supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO ACLM104949.

Part numbers include WJB / INMOTION PARTS WTLM102910, WJB / INMOTION PARTS WTLM102949 and WJB / INMOTION PARTS WTLM104912, among others listed above.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Differential Cover Gasket parts for the 1972 Fargo B200 Van come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO RDS55047. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

Listed part numbers: FEL-PRO RDS55047, FEL-PRO RDS6583 and MAHLE / CLEVITE P18564, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

19 Differential Pinion Bearing / Race parts are listed for the 1972 Fargo B200 Van, from BCA, WJB / INMOTION PARTS, ACDELCO and 1 other brand. WJB / INMOTION PARTS WTM86610 carries the "Popular" badge. All of them fit every engine offered in the 1972 B200 Van.

Economy: 8 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTM86610.

The Standard Replacement section: 11 options from BCA, ACDELCO and SCHAEFFLER. BCA NBM802048 is listed in this group.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts for the 1972 Fargo B200 Van come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

This group includes SCHAEFFLER SR3506, SCHAEFFLER SR3491 and WJB / INMOTION PARTS WS99168 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Differential Pinion Seal parts for the 1972 Fargo B200 Van come from 4 brands — WJB / INMOTION PARTS, BCA, SCHAEFFLER and 1 other brand. The "Popular" part is NATIONAL 5126. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

Listed part numbers: NATIONAL 5126, WJB / INMOTION PARTS WS8516N and BCA NS8516N, plus the other parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

One part is listed for the 1972 Fargo B200 Van — RICHMOND XL10411.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

One part is listed for the 1972 Fargo B200 Van — BCA NS88187.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

6 Differential Ring and Pinion parts for the 1972 Fargo B200 Van come from 2 brands — DANA and MOTIVE GEAR. The "Popular" part is DANA 2021412. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

The Economy section: 4 options from DANA. DANA 2021412 is listed in this group.

Standard Replacement: 2 parts, from DANA and MOTIVE GEAR. A representative part number is DANA 70907X.

Part numbers include DANA 2021412, DANA 2020880 and DANA 2020606, among others listed above.

This table covers the Differential Spider gears. Read more

2 Differential Spider Gear parts for the 1972 Fargo B200 Van come from 2 brands — RICHMOND and MOTIVE GEAR. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

The Economy section: 1 option from RICHMOND. RICHMOND XL4072 is listed in this group.

Standard Replacement: 1 part, from MOTIVE GEAR. A representative part number is MOTIVE GEAR C825BI.

Part numbers include RICHMOND XL4072 and MOTIVE GEAR C825BI.

This table covers the Differential washers. Read more

This group shows a single part: MOTIVE GEAR C825SW.

This table covers the U-joints in the driveshaft. Read more

2 Universal Joint parts for the 1972 Fargo B200 Van come from MOOG. Every part fits all 3 engine options (3.2L 198cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

This group includes MOOG 315G and MOOG 317.

This table covers the Universal Joint Strap kits. Read more

This group shows a single part: MOOG 31810.