1972 Fargo B300 Van Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1972 Fargo B300 Van — SEALED POWER 1454M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 1972 Fargo B300 Van, from KING ENGINE BEARINGS and SEALED POWER.

This group includes KING ENGINE BEARINGS CR614AM and SEALED POWER 62375CP.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB407AM.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 1972 Fargo B300 Van come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO BS40240 and MAHLE / CLEVITE JV607.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts are listed for the 1972 Fargo B300 Van, from FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO 7918PT1 and MAHLE / CLEVITE 1162VC.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1972 Fargo B300 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO HS7918PT4, MAHLE / CLEVITE HS1162VE and VICTOR REINZ 021012901.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 1972 Fargo B300 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO 2601004 carries the "Popular" badge.

Listed part numbers: FEL-PRO 2601004, FEL-PRO FS7918PT4 and MAHLE / CLEVITE 953001, plus the other parts above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1972 Fargo B300 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts for the 1972 Fargo B300 Van come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1972 Fargo B300 Van, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts for the 1972 Fargo B300 Van come from 5 brands — WIX, FRAM, FVP and 2 other brands. The "Popular" part is WIX 51515XP.

The Economy section lists 3 options from FVP, PRO-TEC and PUROLATOR — the catalog's value-priced group. FVP R1515 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51515XP is listed in this group.

In the Standard Replacement grade, WIX and FRAM supply 2 parts: built to original-equipment specification. A representative part number is WIX 51515.

Part numbers include WIX 51515XP, FVP R1515 and PRO-TEC PXL51515, among others listed above.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filter Gasket parts are listed for the 1972 Fargo B300 Van, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 70078 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 1972 Fargo B300 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO OS12705C1, MAHLE / CLEVITE OS30920X and VICTOR REINZ 101018001.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1972 Fargo B300 Van, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1972 Fargo B300 Van — VICTOR REINZ 711450000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1972 Fargo B300 Van — SEALED POWER 244NP.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 1972 Fargo B300 Van, from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 carries the "Popular" badge.

The Premium section lists 1 option from HASTINGS MANUFACTURING — a step above OE specification in materials, tolerances or warranty terms. HASTINGS MANUFACTURING 2M687 is listed in this group.

The Standard Replacement section: 4 options from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 is listed in this group.

Listed part numbers: HASTINGS MANUFACTURING 687, HASTINGS MANUFACTURING 2M687 and HASTINGS MANUFACTURING 2C687S, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 1972 Fargo B300 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO TCS127691, MAHLE / CLEVITE JV814 and VICTOR REINZ 151035401.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 64572.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 1972 Fargo B300 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO VS12680, MAHLE / CLEVITE VS39745 and VICTOR REINZ 151040001.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: SEALED POWER AT2084.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 1972 Fargo B300 Van come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

This group includes FEL-PRO SS12764, MAHLE / CLEVITE SS45298 and VICTOR REINZ 121007101 and the remaining parts above.