1972 Fargo W100 Pickup Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

SEALED POWER supplies both parts for the 1972 Fargo W100 Pickup.

This group includes SEALED POWER 1454M and SEALED POWER 1453M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1972 Fargo W100 Pickup, from SEALED POWER and KING ENGINE BEARINGS.

Listed part numbers: KING ENGINE BEARINGS CR614AM, SEALED POWER 62375CP and SEALED POWER 2320CP, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 1972 Fargo W100 Pickup come from 2 brands — KING ENGINE BEARINGS and SEALED POWER.

Listed part numbers: KING ENGINE BEARINGS MB407AM and SEALED POWER 4094M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 1972 Fargo W100 Pickup come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SCHAEFFLER.

Listed part numbers: NATIONAL 99218, SCHAEFFLER SR3515 and WJB / INMOTION PARTS WS99226, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 1972 Fargo W100 Pickup come from 6 brands — FEL-PRO, BCA, MAHLE / CLEVITE and 3 other brands. The "Popular" part is FEL-PRO BS40240.

Listed part numbers: FEL-PRO BS40240, BCA NS3103 and MAHLE / CLEVITE JV607, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 7918PT1, FEL-PRO 8519PT1 and MAHLE / CLEVITE 1162VC and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO HS7918PT4, FEL-PRO HS7891PT11 and MAHLE / CLEVITE HS1162VE and the remaining parts above.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 1972 Fargo W100 Pickup — VICTOR REINZ 711638300.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. FEL-PRO 2601004 carries the "Popular" badge.

Listed part numbers: FEL-PRO 2601004, ENGINE PRO 311010MLS and FEL-PRO FS7918PT4, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MAHLE / CLEVITE 2112085.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: MAHLE / CLEVITE 66593RS.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO MS90175 carries the "Popular" badge.

This group includes FEL-PRO MS90175, FEL-PRO MS96007 and MAHLE / CLEVITE MS19969 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts for the 1972 Fargo W100 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: GATES 31066.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 1972 Fargo W100 Pickup come from 6 brands — WIX, FRAM, FVP and 3 other brands. The "Popular" part is WIX 51515XP.

The Economy section lists 3 options from FVP, PRO-TEC and PUROLATOR — the catalog's value-priced group. FVP R1515 is listed in this group.

The High Performance / Heavy Duty section lists 3 options from WIX, FRAM and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51515XP is listed in this group.

In the Standard Replacement grade, WIX and FRAM supply 2 parts: built to original-equipment specification. A representative part number is WIX 51515.

This group includes WIX 51515XP, FVP R1515 and PRO-TEC PXL51515 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 1972 Fargo W100 Pickup come from 3 brands — VICTOR REINZ, ENGINE PRO and FEL-PRO.

Listed part numbers: ENGINE PRO 317345WT, FEL-PRO OS11729C1 and VICTOR REINZ 101018801, plus the other parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1972 Fargo W100 Pickup, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1972 Fargo W100 Pickup — SEALED POWER 406AP.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts are listed for the 1972 Fargo W100 Pickup, from HASTINGS MANUFACTURING and SEALED POWER. SEALED POWER E318K carries the "Popular" badge.

The Premium section lists 3 options from HASTINGS MANUFACTURING and SEALED POWER — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER E318K is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and SEALED POWER. SEALED POWER E318X is listed in this group.

This group includes SEALED POWER E318K, HASTINGS MANUFACTURING 2M676S and HASTINGS MANUFACTURING 2M676 and the remaining parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

One part is listed for the 1972 Fargo W100 Pickup — SEALED POWER RP3191.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts for the 1972 Fargo W100 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO TCS124602 and VICTOR REINZ 151025001.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts for the 1972 Fargo W100 Pickup come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE. The "Popular" part is FEL-PRO VS13379.

This group includes FEL-PRO VS13379, FEL-PRO VS50145R and MAHLE / CLEVITE VS38322 and the remaining parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: SEALED POWER HT976.

This table covers the Valve seats. Read more

2 Valve Seat parts are listed for the 1972 Fargo W100 Pickup, from DURA-BOND and SEALED POWER.

Part numbers include DURA-BOND 30682 and SEALED POWER 24518751.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 1972 Fargo W100 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ. The "Popular" part is FEL-PRO SS70014.

Part numbers include FEL-PRO SS70014, FEL-PRO SS12419 and FEL-PRO SS12764, among others listed above.